Quick Links

Information

EMC Receivers/EMI Analyzers

The EMC Shop speacializes in radiated and conducted emissions testing. For CISPR or MIL complaint EMC receivers, or precompliance EMI spectrum analyzers, The EMC Shop stocks the right EMC analyzer for your testing needs. For precompliance testing, evaluation or troubleshooting, a standard spectrum analyzer doesn't always get the job done. Electr...

The EMC Shop speacializes in radiated and conducted emissions testing. For CISPR or MIL complaint EMC receivers, or precompliance EMI spectrum analyzers, The EMC Shop stocks the right EMC analyzer for your testing needs. For precompliance testing, evaluation or troubleshooting, a standard spectrum analyzer doesn't always get the job done. Electrical and magnetic disturbances are best identified using an EMC receiver/EMI analyzer with built in quasi peak detectors, noise floor extension and software features to identify electromagentic events that can occur in speeds not managed well by most spectrum analyzers.

Get Application Support, Pricing, Lead Time and More: Contact Form

See our EMC Receivers/EMI Analyzers from manufacutures:

More

EMC Receivers/EMI Analyzers There are 30 products.

Subcategories

  • Precompliance EMI Test Receivers

    Browse new, used, and refurbished EMC Analyzers / EMI Receivers for Precompliance Testing today.

    The EMC Shop stocks precompliance test receivers/analyzers from a variety of manufactures such as: Narda(PMM), Rohde & Schwarz and more.

    EMC/EMI test receivers can be essential to determine the causes and effects of electromagnetic interference before the certification lab.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Compliant EMI Test Receivers

    EMC/EMI signal analyzers will allow you to perform pre-compliance measurements and diagnostic evaluation of your products so you can find and fix problems before they enter the test chamber for certification.

    The EMC Shop carries compliant EMI test receivers to conduct full standards-compliant testing in accordance with standards such as:

    • CISPR
    • EN/IEC
    • FCC
    • ANSI
    • MIL STD
    • DO-160 and more

    In stock fully compliant EMI test receivers for ideal EMI certification measurements as required in a variety of applications.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Harmonics and Flicker Analyzers

    Rent, buy, or lease Harmonics and Flicker Measurement Analyzers. The EMC Shop specializes in voltage changes and fluctations test equipment. EMC Harmonics and Flicker measurement test equipment for pre compliance, evaluation, and troubleshooting in stock, calibrated and ready to ship today.

    See our Flicker & Harmonics Generators

    Get Application Support, Pricing, Lead Time and More: Contact Form

per page
Showing 1 - 12 of 30 items
    • Rentals ship immediately
    • 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
    • Real-Time Analysis up to 85 MHz BW
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • Purchase a Used Keysight N9038 EMI Analyzer here.
    Request Quote/More Info
    • Rentals Ship Same Day
    • Built to CISPR 16-1-1 and CISPR 16-1-2 Standards
    • 140 dBµV (2 W) maximum input level without damage
    • 9 kHz – 3 GHz Frequency range, single input (extendable to 9 KHz and 3 GHz)
    • Built in LISN
    • Direct analog to digital conversion up to 30 MHz
    • CISPR Detectors:  Peak, Quasi-Peak, Average, RMS, C-Average, RMS-Average (option) Time-saving Smart Detector function analyzing critical frequencies only
    Request Quote/More Info
    • Rent the Keysight (Agilent) N9038A-526-B85-RT1
    • 3 dB resolution bandwidths
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • ±0.5 dB absolute amplitude accuracy
    • -166 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
    • EMC measurements offering simultaneous detectors, signal lists, scan tables, limit lines, and correction factors
    Request Quote/More Info
    • Ideal analyzer for EMI conducted emissions precompliance testing
    • 9 kHz to 40 GHz
    • Built-in quasi peak detector
    • Run multiple detectors simultaneously for fast testing
    • Resolution bandwidth 1 Hz to 10 MHz
    • Used FSP38 spectrum analyzer supplied with Fresh NIST Calibration
    • 10% off Calibration Services for Life
    • 180 Day Warranty
    Request Quote/More Info
    • EMI test receiver and signal/spectrum analyzer combined in one box
    • Resolution bandwidths in line with CISPR
    • Weighting detectors: max. peak, min. peak, average, RMS, quasi-peak, average with meter time constant, and RMS in line with current CISPR 16-1-1 version
    • Very fast FFT-based time domain scan as an option
    • Automatic test routines
    Request Quote/More Info
    • Frequency ranges:
      • 2 Hz to 8 GHz ESW8
      • 2 Hz to 26.5 GHz ESW26
      • 2 Hz to 44 GHz ESW44
    • Compliant with CISPR16-1-1, ANSIC63.2, MIL‑STD‑461 and FCC
    • Highest dynamic range and highest accuracy for demanding certification measurement
    • Ultrafast measurements with FFT-based time domain scan
    • EMI test receiver and signal and spectrum analyzer in a single box
    Request Quote/More Info
    • EMI test receiver and signal/spectrum analyzer combined in one box
    • Resolution bandwidths in line with CISPR
    • Weighting detectors: max. peak, min. peak, average, RMS, quasi-peak, average with meter time constant, and RMS in line with current CISPR 16-1-1 version
    • Very fast FFT-based time domain
    • Automatic test routine
    Request Quote/More Info
    • Available for Rental or Purchase
    • Hardware and Firmware designed around the current EMC standards ready to upgrade to future changes
    • Powerful digital Click Analyzer with full compliance to latest CISPR 14-1 specifications, 1 (internal option) or 4 (external option) channels
    • Frequency ranges: 10Hz to 30MHz; 3GHz; 6GHz; 18GHz
    Request Quote/More Info
    • Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
    • Resolution bandwidth settings down to 1 Hz
    • 10.1" WXGA (1366 x 768 pixel) display
    • Wi-Fi-enabled w/ remote control (included)
    • Easy virtual control w/ iOS/Android/PC
    • Low noise floor / High max. input power
    • Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
    • Three-year warranty
    Request Quote/More Info
    • Frequency range: 10 Hz – 30 MHz, expandable to 3/6/18 GHz by the external modules 9030, 9060, 9180
    • Very low noise floor:  < -24 dBµV in band A, < -7 dBµV in band B
    • Multi-band preselector
    • All CISPR detectors, simultaneous
    Request Quote/More Info
  • The PMM 9030 is an ultra-fast EMI receiver head that extends the measurement range of the PMM 9010 EMI receiver to cover 30MHz to 3GHz for Radiated Emissions testing as a full-compliance EMI receiver. It is the only fully-compliant EMI receiver directly connectable to an antenna.

    Request Quote/More Info
  • PMM 9060 Extension unit to 9010 to increase frequency range to 6GHz, fully CISPR 16-1-1 compliant. Fiber optic link to 9010 receiver, includes 20m cable and antenna adapter. Rechargeable Li-Ion battery with AC charger/adapter. RS-232 interface for service.     

    Request Quote/More Info
Showing 1 - 12 of 30 items