Test Equipment

Services

Information

Test Equipment

The EMC Shop focuses on electromagnetic test equipment, application support and pre-compliance systems. As a distributor for key manufacturers including Teseq, EM Test, IFI, Vectawave, Com-Power, AH Systems and many more. The EMC Shop stocks equipment for sale and rental, offers application guidance and post sales support including on-site visits and training.

Test Equipment There are 149 products.

Subcategories

  • Transient Generators

    Transient generators are required for conducted immunity testing portions for CE Marking and other product certification. The EMC Shop stocks all types of transient generators for compliance and precompliance testing. Rent or buy transient generators for individual tests or multifunction generators to complete an assorment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Transient generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.



    Common Transient Tests

    • Surge: Generators for combination/wave test IEC 61000-4-5, ANSI C63 and more.
    • EFT/Burst: Electrical Fast Transient Generators for IEC 61000-4-4.
    • Dips, Drops (& Variations): PQF/Powerline Tests in accordance to IEC 61000-4-11, 4-29 and more.
    • Automotive: Assortment of transient surges found in DC powered vehicles..
    • Ring Wave: Oscillatory wave tests per IEC 61000-4-12, 4-18, ANSI and more.
    • Telecom: Additional tests on data lines in unison with surge simulation tests.
    • Flicker & Harmonics: Power sources and analyzer turn key systems per IEC 61000-3-2 and 3-3.
    • ESD: Electrostatic discharge immunity simulators per IEC 61000-4-2
    • Magnetic: Radiated magnetic susceptibility per IEC 61000-4-8 and IEC 61000-4-9

  • EMC Receivers/EMI Analyzers

    The EMC Shop speacializes in radiated and conducted emissions testing. For CISPR or MIL complaint EMC receivers, or precompliance EMI spectrum analyzers, The EMC Shop stocks the right EMC analyzer for your testing needs. For precompliance testing, evaluation or troubleshooting, a standard spectrum analyzer doesn't always get the job done. Electrical and magnetic disturbances are best identified using an EMC receiver/EMI analyzer with built in quasi peak detectors, noise floor extension and software features to identify electromagentic events that can occur in speeds not managed well by most spectrum analyzers.

    Get Application Support, Pricing, Lead Time and More: Contact Form

    See our EMC Receivers/EMI Analyzers from manufacutures:

  • RF Power Amplifiers

    High power RF power amplifiers for IEC 61000-4-3, IEC 61000-4-6, MIL-STD 461 RS testing for radiated compliance.

    The EMC Shop stocks RF Microwave Solid State and Traveling Wave Tube (TWT) Amplifiers (tetrode tube, millimeter, pulsed, CW and combination amps.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • RF Conducted Test Equipment

    The EMC Shop specializes in RF Conducted Immunity Testing to IEC 61000-4-6, ISO 11452-4MIL-STD-461 CS114 and other product compliance standards. The EMC Shop offers turnkey solutions with minimal hardware and easy to use software.

  • RF Test Equipment

    RF test equipment are required for radiated immunity testing portions for CE Marking and other product certification. The EMC Shop stocks RFI equipment a-la-carte or can configure a turnkey RF immunity test system. Most systems can be easily upgraded to include additional tests as required.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Common RF Test Equipment

    • Power Amplifiers: Key component for generating power levels and field strengths in commercial, military and aerospace standards
    • Signal Generators: Generate the sweep frequencies, pulses and modulations for RF immunity tests
    • LISN's: Utilized to isolate EUT susceptibilities from external variables.
    • CISPR Compliant Receivers: EMC analyzers conorming to CISPR 16-1-2 and MIL-STD emissions testing and analysis.
    • RF Switches: Used to automate broadband systems requiring multiple RF amplifiers and other system components.
    • Chambers: RF immunity testing must be done in a shielded enclosure to keep nearby personnel and electronics safe.
    • Field Probes: Verify RF field strengths.

  • EMC Probes

    Monitor high power, radiated fields or identify susceptible areas with a wide variety of probes for broadband monitoring or frequency specific points.

    CURRENT PROBES

    Current probes required by various EMI specifications (such as MIL-STD-461/2) are toroidal transformers designed to measure RF currents on active power lines or other conductors.

    INJECTION PROBES

    Specifications require the injection of large high frequency currents into cable bundles and individual wires, using inserted secondary toroidal transformers placed around the conductors being tested.

    Bulk current injection probes are available in two styles:

    1. Fixed window style where the wire(s) under test must be passed through the window.

    2. A split toroidal design where the probe can be opened and clamped over the wire(s) under test.

    RF FIELD PROBES

    Radio frequency field probes capable of measuring RF energy over a wide range of field strength and frequency.

     

     Get Application Support, Pricing, Lead Time and More: Contact Form

  • EMC Antennas

    The quintessential element for all radiated EMC testing. Most antennas now have hgih power transmit and receive capabilites with very broadband frequency ranges. Allowing for many users to accomplish testing without having to interrrupt testing to convert to a higher or lower frequency antenna or setting up an intricate switching system. The EMC Shop stocks EMC antennas for rental, purchasing and immediate delivery.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • Anechoic Chambers & GTEM's

    The EMC Shop stocks GTEM's and manages anechoic chamber installs for radiated emissions and immunity/susceptibility testing.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Transport and install of anechoic chambers and GTEM's is a tough task. The EMC Shop will handle the logistic in shipping, install and validation/calibration of the chambers for accurate RF testing.



    Precompliance GTEM & Anechoic Chamber Considerations

    • GTEM 250: Easy transport and setup for DUT sizes 8" by 6" by 6"
    • TEM CELLS: Efficient method for radiated testing at lower frequencies
    • Anechoic Chambers: Very in-depth project, this engineering project will take several months and hundreds of thousands or millions of dollars.

  • EMC Measurement & Equipment Software

    The EMC Shop can customize EMC measurement software to integrate most types of test equipment and automate EMC testing. Delivery with easy setup instructions as well as onsite support available. Turnkey systems can be configured to meet a wide assortment of testing standards and budgets.



    Get Application Support, Pricing, Lead Time and More: Contact Form



    EMC Measurement & Equipment Software

    • Immunity/Susceptibility: Injecting radiation over broadband
    • Emissions: Identify EUT susceptibility points
    • Antenna Measurement: OTA analysis
    • Custom Tests and Reporting
    • Ready to use standards for IEC, CISPR, ANSI, MIL-STD, and DO-160
per page
Showing 1 - 12 of 149 items
Showing 1 - 12 of 149 items