Compliance Standards

Quick Links

Information

Compliance Standards There are 107 products.

Subcategories

  • International Compliance Standards (IEC/EN)

    Nowadays, it is good practice to certify any consumer product, be it commercial electronics or an electric guitar. Posting the CE, UL or other compliant mark on your product is looked at by distributors and consumers alike. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the international compliance standards available at The EMC Shop.

  • Product Standards

    Industry specific products include electrical equipment for medical devices, automotive and transportation, and basic consumer products. The EMC Shop will help pinpoint the required test equipment for certifying or evaluating your product in order to obatin certification.

  • Military & Aerospace Standards
    These standards establishes interface and associated verification requirements for the control of the electromagnetic interference (EMI) emission and susceptibility characteristics of electronic, electrical, and electromechanical equipment and subsystems designed or procured for use by activities and agencies of the Department of Defense (DoD).
  • Automotive EMC Standards

    With the rise of electrical vehicles more test standards are rising to ensure safety. The EMC shop is supplying test equipment for traditional automotive standards ISO 7637 as well as for specific applications including wireless RF immunity and emissions as well as surge protection during charging.

  • CISPR Standards

    CISPR Standards set for controlling electromagnetic interference in electrical and electronic devices, and is a part of the International Electrotechnical Commission (IEC).

  • Telecom Testing

    Telecom Testing EMC requirements for information technology & telecommunication equipment.

    The EMC Shop stocks electromagnetic environmental equipment for classes of telecommunication equipment covering all relevant electromagnetic environmental parameters. This Recommendation applies to telecommunication equipment installed in telecommunication centres, outdoor locations and customer premises. This is a basic EMC Recommendation for telecommunications.

  • ANSI/IEEE Standards

    The American National Standards Institute (ANSI) is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States.

    IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry.

  • FCC Part 15

    FCC Part 15 regulates low power, unlicensed devices that could cause interference to the Amateur Radio Service and vice versa.

    FCC Part 15 covers an assortment of electronic equipment that generates RF energy whether it's intentional, unintentional or incidental. Amateurs will need to consider Part 15 as it relates to digital devices, computers, low-powered, unlicensed transmitters, electrical devices and any other "generic" device that might generate RF in the normal course of its operation.

    Rent, buy, or lease FCC Part 15 test equipment for radiated and conducted emissions measurements. The EMC Shop stocks calibrated equipment.

per page
Showing 1 - 12 of 107 items
    • VCS 500M10 10kV Combination Wave Surge Simulator
    • TSS 500M10 Telecom Surge Generator
      • 10 / 700us pulse according to IEC/EN 61000-4-5
      • Test voltage up to 10kV
      • Compliant with ITU-T standard for enhanced test level
      • Complies with FCC part 68 (Surge B pulses)
    • CWS 500 Continuous Wave Simulator
      • RF Conducted Simulator 150kHz to 230 MHz per IEC/EN 61000-4-6
      • Built-in dual directional coupler
      • Automatic calibration via built-in power meter
    • EFT 500 Electrical Fast Transient Generator
    • PFS 500 Voltage Dips and Drop Interruptions
    Request Quote/More Info
  • $1,960.00
    Request Quote/More Info
  • Request Quote/More Info
    • Integrated signal generator 9 kHz to 1 GHz
    • 3 power meter inputs 9 kHz to 1 GHz
    • Integrated power amplifier module for different applications
    • Multiple EUT monitoring options
    • Optional built-in amplifier up to 75 watts (150 kHz - 230 MHz)
    • Meet IEC 61000-4-6,  IEC 61000-4-3, IEC 61000-4-20, IEC 61000-4-21 
    • Meet Mil-STD 461 CS114
    Request Quote/More Info
    • Price is for a pair of LI-550A LISN's
    • Fully compliant to CISPR 16-1-2 / CISPR 25
    • "Air-core" inductors to prevent saturation
    • Provides a near 1:1 (<0.5 dB insertion loss) 50Ω coaxial measurement port (type-N)
    • Provides a defined, stable, impedance to the Equipment Under Test (EUT)
    • Individual Calibration Included
    • Three Year Warranty
    Request Quote/More Info
  • Quick view
    $841.50 $990.00 -15%
    $841.50 $990.00 -15%
    Reduced price!
    Request Quote/More Info
    • AE: 4mm safety lab connector
    • EUT: 4mm safety lab connector
    • AC: max. 250 Volts, 16/32/50/75/100 Amps
    • DC: max. 1,000 Volts, 16/32/50/75/100 Amps
    • Frequency 150 kHz - 230 MHz (up to 80 MHz on higher power models)
    Request Quote/More Info
    • Compatible with Teseq's NSG 3040, NSG 3060 systems
    • Use with Teseq CAS 3025
    • Complies with IEC 61000-4-4 Ed 2.0 2004
    • Complies with IEC 61000-4-4 Ed 3.0 2012
    • Safety cover with interlock
    • Calibration kit per IEC 61000-4-4 Ed 3.0 2012
    $299.00
    Request Quote/More Info
  • Request Quote/More Info
    • IEC/EN 61000-4-18 & ANSI C37.90.1 
    • 100 kHz and 1 MHz oscillation frequency from 0.2 to 4.4 kV
    • Selectable source impedance of 200 Ω and 150 Ω
    • Pulse repetition rate exceeds standards requirement
    • Quickly launch tests from extensive Standards Library or User Test folders
    • Easy-to-operate 7“ touchscreen color display
    Request Quote/More Info
  • Request Quote/More Info
    • Automated test modes, software assisted test preparation, predefined test routines and visual aided test setups
    • Automatic generation of test report, including test parameters, test setup and test result
    • Compliance and pre-compliance testing of electrical products
    • Includes
    • CE marking
    • Product development and debugging
    • Compliance testing of telecom and wireless devices
    Request Quote/More Info
Showing 1 - 12 of 107 items