Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
EN/IEC 61000-3-3
- EN/IEC 61000-3-2
- EN/IEC 61000-3-3
- IEC 61000-3-11
- IEC / EN 610000-3-12
- EN/IEC 61000-4-2
- EN/IEC 61000-4-3
- EN/IEC 61000-4-4
- EN/IEC 61000-4-5
- EN/IEC 61000-4-6
- IEC 61000-4-6 Broadband Power Amplifiers
- IEC 61000-4-6 RF Generators
- IEC 61000-4-6 Coupling and Decoupling Devices
- IEC 61000-4-6 Current Monitoring Probes
- IEC 61000-4-6 RF Conducted Immunity Test Systems
- EN/IEC 61000-4-7
- EN/IEC 61000-4-8
- EN/IEC 61000-4-9
- EN/IEC 61000-4-10
- EN/IEC 61000-4-11
- EN/IEC 61000-4-12
- EN/IEC 61000-4-16
- EN/IEC 61000-4-18
- EN/IEC 61000-4-19
- EN/IEC 61000-4-20
- EN/IEC 61000-4-21
- EN/IEC 61000-4-29
- EN/IEC 61000-4-31
- IEC 61000-4-39
- EN/IEC 62132
- SEMI F47 Voltage Sag Immunity
EN/IEC 61000-3-3
EN/IEC 61000-3-3: Limitation of voltage changes, fluctuations and flicker in public low-voltage supply systems
EN/IEC 61000-3-3 There are 24 products.
California Instruments OMNI 1-18i Impedance Matching Network
In Stock- Impedance matching network for single phase 5001i/iX to support IEC-1000-3-3 flicker tests
- AC Source Line Impedance Network
- Meets IEC 1000-3-3 Flicker test specification requirements
- Single and Three Phase Models
- Bypass Mode
- Remote Control Interface
LDPS AC Power Source, 1 kW up 4.4 Amps
In Stock- Full compliance with IEC61000-3-2 standard when used with LDPS power source
- Fully compliant IEC61000-3-3 flicker measurement
- Harmonic measurement in accordance with EN61000-4-7 and Flicker as defined by EN61000-4-15
- P.C. Software and USB interface included for downloading results, archiving and printout
- Provides an EN61000–3–2 compliant source
- 1000W power capability at 230V
- Up to 4·4A rms load current and up to 10A peak currents
- Comprehensive overload protection
- Connection via standard power connector
PHFA Harmonics and Flicker Analyzer
In Stock- Full compliance with IEC61000-3-2 standard when used with LDPS power source
- Fully compliant IEC61000-3-3 flicker measurement
- Harmonic measurement in accordance with EN61000-4-7 and Flicker as defined by EN61000-4-15
- P.C. Software and USB interface included for downloading results, archiving and printout
California Instruments CSW5550 Programmable AC Power Source
In Stock- 40 - 5,000 Hz Output Frequencies
- Combination AC and DC Power Source and Power Analyzer
- Built in Function Generator
- Scope Capture Capability
- EN61000-3-2 and EN61000-3-3
- Powerful Programming Software
California Instruments 1501iX Programmable AC Power Source
In Stock- 1000 W DC Output
- 1500 VAC of Output Power
- Combination AC and DC Power Source and Power Analyzer
- AC, DC or AC+DC
- Built-in Digital Power Analyzer
- Scope Capture Capability
- EN61000-3-2 and EN61000-3-3
- Powerful Programming Software
- Constant Power Mode
California Instruments 5001iX Series II AC/DC Power Source & Analyzer up to 5kVA
In Stock- 3500 W DC Output
- 5000 VA of Output Power
- Combination AC and DC Power Source and Power Analyzer
- AC, DC or AC+DC
- Built-in Digital Power Analyzer
- Scope Capture Capability
- EN61000-3-2 and EN61000-3-3
- Powerful Programming Software
- Constant Power Mode
EM Test ACS 503N30 AC Voltage Source for Harmonics & Flicker Compliance Testing
In Stock- Output Power: 30,000 VA
- Output Current, 50 Hz (60 Hz)
- Inductive Load: 41A (43A)
- Resistive Load: 34A (33A)
- Capacitive Load: 27A (26A)
- ma. 78A (79A) RMS for 3 sec.
- Repetitive Peak: 300 Amps
- Input Current: Max 100 Amps
- Weight: 550 kg
- Dims (mm): 1670 x 920 x 625
3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12
Typically In Stock- Test DUT up to 3 Phase, 32 Amps per line
- Real-time data acquisition
- Meets IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more
- System Consists of:
Rent EM Test DPA 503N 3 Phase Harmonics & Flicker Power Analyzer
Typically In Stock- Real-time data acquisition
- Meets IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more
- Wide-range current input: 140 Amps with Standard CT's
- Wide-range voltage input: 10 - 530V rms
- Flicker Accuracy: 0.15%
- USB interface for control and data transfer
EM Test AIF 503N32.1 3-Phase Flicker Impedance Network
Typically In Stock- Impedances values as per IEC/EN 61000-3-3 & IEC/EN 61000-3-11
- Non-saturable air coil inductors
- Line voltage 3 x 400V
- Line current up to 32A per phase
- Automatic overcurrent protection
- Status indication by LED
- Remote-controlled by EM Test DPA 503N
Laplace AC1000 Low Distortion Power Supply up to 1kWatt
In Stock- Fully meets the requirements for compliance testing of harmonics
- Innovative, low cost technique
- Will provide up to 1kW (4.4A rms) at 230V
- 10Amp peak capacity
- US or Schucko Connector Available
Teseq ProfLine 2103-240, 3 kVA Single Phase Harmonics & Flicker Measuring System
Typically In Stock- 3 kVA
- IEC 61000-3-2 and IEC 61000-3-3 Testing
- supporting testing on products consuming up to 11 Amps rms and 92 Amp peak @230 Vac
- single Phase
- stable, accurate, programmable 3 kVA power source
- NSG 1007-3 Power source
- CCN 1000-1 single phase
- Coupling unit
