Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
MIL-STD-462
MIL-STD-462 There are 10 products.
Showing 1 - 10 of 10 items
FTC-10 - 10 Microfarad ( µF ) Feed-Thru Capacitor
In Stock- High insulation resistance over a wide temperature range
- Excellent stability with long life
- Built-in discharge resistor for safety
- Designed for bulkhead or bench mounting
Solar 7054-2 600 V Spike Generator for MIL 462 CS06 and DO-160 Section 17
Typically In Stock- Provides output levels from 10 V to 600 V into 5 Ω. Delivers more than 300 kW peak into 0.5 Ω load
- Adjustable pulse position on AC lines relates the transient susceptibility to real time aspects of digital systems
- Single pulse feature for controlled isolation of transient effects
- Output terminals for series or parallel injection
- Includes 2201-1 and 2201-2 transformers
- Standard rack panel construction: 19" wide x 7" high x 12.75" deep (48.26 cm x 17.78 cm x 32.38 cm)
Solar Type 6512-106R 10 µF Feed-Thru Capacitor
In Stock- High insulation resistance over a wide temperature range
- Excellent stability with long life
- Built-in discharge resistor for safety
- Designed for bulkhead or bench mounting
- Comparable to our FTC-10
Solar Solid State Amplifier 6552-1A 10 Hz - 100 kHz, 100 Watts for MIL-STD-461A/462
In Stock- Solid State
- Up to 100 Watts Output
- Wide Frequency Range
- Low Input Impedance
- No Output Transformer
- Input and Output Protective Circuits
- Lightweight and Portable
AIF-250K Audio Isolation Transformer for Conducted Susceptibility
Typical Lead Time 2 - 4 Weeks- Primary Less than 5 ohms
- Secondary 1⁄4 the primary impedance
- Frequency response 30 Hz to 250 kHz
- Audio power 200 W
- Secondary saturation 50 A, AC or DC max.
- Turns ratio 2-to-1
Solar Type 7115-2 High Voltage Transient Pulse Transformer
In Stock- 500 V to 15 kV peak
- Transient Pulse Transformer
- Designed to be plugged into the SERIES terminals of the Solar Model 8282-1 Spike Generator
- 4.75" wide x 4.35 " high x 4.75" insulated case measuring
Solar Type 7032-3 Isolation Transformer
In Stock- 115 V to 230 V Power Line Voltages
- Equipped with a male connector on the 115 V winding
- Female connector on the 230 V winding
- Connectors are the international style IEC-320/CEE 22
- Mating plugs not supplied
- Rated at 800 W, 50-60 Hz
Solar Type 6220-1B Audio Isolation Transformer
In Stock- Audio Isolation Transformer
- For conducted audio frequency susceptibility testing
- Provides a convenient bench model unit with three-way binding posts on primary and output voltmeter leads. Standard 0.75" spacing of binding posts allows use of standard plugs. High current secondary uses 1/4-20 threaded studs.
- Capable of handling the audio power required by EMI specifications and up to 50 A of AC or DC through the secondary in series with the test sample.
- May be used as a pickup device or an isolating inductor in other tests.
- Suitable for fastening to the bench top in permanent test setups.
Solar 10 µF Feed-Thru Capacitors in RFI/EMI for MIL-STD-461A/462A
In Stock- High insulation resistance over a wide temperature range
- Excellent stability with long life
- Built-in discharge resistor for safety
- Designed for bulkhead or bench mounting
Solar 6220-1A Audio Isolation Transformer 30 Hz - 250 kHz
Typical Lead Time 2 - 4 WeeksProvides a convenient bench model unit with three-way binding posts on primary and output voltmeter leads. Standard 0.75" spacing of binding posts allows use of standard plugs. High current secondary uses 1/4-20 threaded studs.
Showing 1 - 10 of 10 items