Capacitive Coupling/Absorbing Clamps

Capacitive coupling/absorbing clamps are used for measuring interference signals on power supply cables. Decoupling clamps and ferrite tube are available for a variety of different EMC applications.

Capacitive Coupling/Absorbing Clamps There are 15 products.

per page
Showing 1 - 12 of 15 items
    • 30 MHz - 1 GHz Frequency Range
    • RF Disturbance power measuring, according to CISPR 14 (EN 55014)
    • Aperture Diameter: 12.7 mm (0.5 inches)
    • Insetion Loss: 14 dB to 21 dB
    • Typically in stock with calibration and 3 Year warranty
    Request Quote/More Info
    • 30 MHz - 200 MHz Frequency Range
    • Calibration Fixture for CMAD 1614
    • With 4 mm diameter is part of the delivery
    • Calibration fixture was designed for measurements acc. to CISPR 16-1-4 sections 9.5 and 9.6
    Request Quote/More Info
    • 30 - 1000 MHz
    • EMI Absorbing Clamp
    • Acc. CISPR 16 for interference power
    • With silicon coated rolls
    Request Quote/More Info
    • 30 MHz - 200 MHz
    • Common Mode Absorption Device
    • Consists of many precision cut ferrite half-toroids
    • Can be used for both, coaxial cables and unshielded cable bundles

    Request Quote/More Info
  • Request Quote/More Info
    • High decoupling
    • Suitable to KEMZ 801
    • Simple insertion in the test setup
    • As specified in IEC/EN 61000-4-6
    • Very efficient coupling
    • Can be used on almost any cable
    • Ruggedly designed
    $3,470.00
    Request Quote/More Info
    • Hand-operated slide lane for absorbing clamps
    • Disturbance power measuring, according to CISPR 16-2-2
    • Needed to find the standing wave
    • Hand operated lane for AMZ 41
    $4,830.00
    Request Quote/More Info
    • 30 MHz - 1 GHz Frequency Range
    • RF Disturbance power measuring, according to CISPR 14 (EN 55014)
    • Aperture Diameter: 34.9 mm (1.37 inches)
    • Insetion Loss: 14 dB to 21 dB
    • Typically in stock with calibration and 3 Year warranty
    Request Quote/More Info
    • Frequency range 1 MHz to 1 GHz
    • Max. cable diameter 10 mm
    • Cable termination for radiated emission and immunity tests
    • Ideal for testing in GTEM cells
    Request Quote/More Info
    • Frequency range 1 MHz to 1 GHz
    • Frequency range 30 MHz to 200 MHz (CISPR 16-1-4)
    • Max. cable diameter 20 mm
    • Conform with CISPR 16-1-4, CISPR 16-2-3, CISPR 11
    Request Quote/More Info
    • As specified in CISPR 16-1-3/EN 55016-1-3
    • Disturbance power measuring, according to CISPR 16-2-2/EN 55016-2-2, CISPR 13/EN 55013, CISPR 14-1/EN 55014-1 and EN 50083-2
    • Excellent for using as diagnostic tool and for measurements of screening attenuation of coaxial cables
    • Supplied with 6 dB attenuator and RF cable
    Request Quote/More Info
    • Hand-operated slide lane for absorbing clamps
    • Disturbance power measuring, according to CISPR 16-2-2
    • Needed to find the standing wave
    • Designed for Teseq MDS 21B
    • Will work with other EMC absorbing clamps also
    $4,620.00
    Request Quote/More Info
Showing 1 - 12 of 15 items