> Test Equipment>RF Test Equipment>RF Preamplifiers>100 Hz - 1 GHz
100 Hz - 1 GHz

Clean up the signal going into your spectrum analyzer, EMC receiver or other meter by using a preamplifier and identify the troublespots that may be buried in the noise. Preamplifiers that fall into the frequency range of 100 Hz to 1 GHz.

100 Hz - 1 GHz There are 10 products.

Showing 1 - 10 of 10 items
  • Quick view
    • Broadband Frequency Range of 1 MHz - 1000 MHz
    • Low Noise Figure: less than 6 dB
    • High Gain: 33 dB
    • Low VSWR: 1.3:1 Max
    • Output Power: +4 dBm @ 1 dB compression
    • Flatness: ± 3 dB
    • Reverse Isolation: Greater than 30 dB
    • Impedance: 50 Ohms
    • Connector: N-type (f)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $1,370.00
    • Frequency range: 1 MHz to 3 GHz (nominal range);200 kHz to 4 GHz (utilizable range)
    • Gain: typ. 12.5 dB
    • Gain flatness: ±0.3 dB (1 MHz to 1 GHz); +0.3 / -2.5 dB (200 kHz to 3 GHz)
    • RF-Input: N - female, 50 Ω
    • RF-Output: N - male, 50 Ω
    • VSWR (input): ≤1.5
    • Noise figure: typ. 4 dB
    • 1 dB-compression (output): >+12.5 dBm (119.5 dBμV)
    $1,370.00
    Add to cart
    4-6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    $1,370.00
    • Frequency range: 9 kHz to 1 GHz (nominal range); 9 kHz to 2 GHz (utilizable range)
    • Gain: typ. 28 dB
    • Gain flatness: ±1 dB
    • RF-Input: N - female, 50 Ω (optional N-male)
    • RF-Output: N - male, 50 Ω (optional N-female)
    • VSWR (input): <1.5
    • Noise figure: typ. 2.8 dB (at 25°C, 100 MHz)
    • 1 dB-compression (output): +8 dBm
    $1,370.00
    Add to cart
    4-6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Models offering up to 48 dB of flat gain
    • Frequency Range from 100 MHz - 18 GHz
    • Built in battery or external DC supply
    • Designed and manufactured in the U.S.A.
    • IP65 / IP60 compliant and conforms to European RoHS and ECCN EAR99
    Request Quote
    4-6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 30 - 33 dB Gain, Max 2:1 VSWR
    • Frequency Range from 1 MHz - 2.5 GHz
    • Built in battery or external DC supply
    • Designed and manufactured in the U.S.A.
    • IP65 / IP60 compliant and conforms to European RoHS and ECCN EAR99
    Request Quote
    4-6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    $175.00
    • Wide Frequency Range - 1 MHz to 1 GHz
    • Improved measurement system sensitivity during EMC compliance testing
    • Amplify the signals that were previously hidden below the noise floor
    $175.00
    Add to cart
    4-6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Broadband - 100 Hz - 30 MHz
    • High Gain: 28 dB
    • Flat Response: ± 2 dB
    • Individual Calibration
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Small Form Factor
    • Extremly Portable
    • Perfect Preamp for Near Field Probe Sets
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $199.00
    • Pre amplifier & Power Amplifier
    • 0.1 to 400 MHz
    • 20 dB Gain
    $199.00
    Add to cart
    4-6 Weeks
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency range 10 kHz to 2.5 GHz
    • 20 dB gain ±1.5 dB
    • Noise figure (7.3 dB typ.)
    • Input damage level: +13 dBm
    • 50 Ohm impedance
    • N(f) connectors, input/output 330N or BNC(f) connectors, input/output 330B
    • 100, 120/220, 240 Vac; 50 to 60 Hz operation; 10 VA
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
Showing 1 - 10 of 10 items