> EMC Test Equipment>RF Test Equipment>RF Preamplifiers>40 GHz Wideband RF Preamplifiers
40 GHz Wideband RF Preamplifiers

Clean up the signal going into your spectrum analyzer, EMC receiver or other meter by using a preamplifier and identify the troublespots that may be buried in the noise. Rent, buy, or lease various Broadband RF Preamplifiers rated to 40 GHz. The EMC Shop specializes in signal integrity and radiated emissions testing.

40 GHz Wideband RF Preamplifiers There are 6 products.

Showing 1 - 6 of 6 items
  • Quick view
    $7,575.00
    • Runs on standard 120VAC (up to 240V for international use)
    • Suitable for millimeter wave emissions and system performance improvement
    • Frequency Range of 18 GHz to 40 GHz
    • Low Noise Figure: 3 dB
    • High Gain: 40 dB typical
    • Output Power: + 10 dBm @ 1 dB compression
    • 2.92 mm (F) Connectors
    $7,575.00
    Add to cart
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Sensitivity for MIL-STD radiated measurements
    • Noise Figure: 1.0-12.5 GHz - 8.5dB; 12.5-22.0 GHz - 12.5dB; 22.0-26.5 GHz - 14.5dB
    • Minimum Gain: 23.5dB
    • Gain Flatness: 1.0-26.5 GHz - ±4.5dB; 2.0-22.0 GHZ ±3.5dB
    • Gain compression: <1 dB for output signal of ≤ +7 dBm
    • Connector Type: ACP - 3.5 male
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range of 18 GHz to 40 GHz
    • Low Noise Figure: 3.7 dB
    • High Gain: 37 dB typical
    • Low VSWR: 2.9:1 Typical
    • Output Power: + 8 dBm @ 1 dB compression
    • Flatness: +/- 3.5 dB
    • Individually Calibrated (gain calibration included)
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range of 18 GHz to 26.5 GHz
    • Low Noise Figure: 2.5 dB
    • High Gain: 32 dB typical
    • Low VSWR: 1.7:1 Typical
    • Output Power: + 6 dBm @ 1 dB compression
    • Flatness: +/- 1.2 dB
    • Individually Calibrated (gain calibration included)
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 18 - 26.5 GHz Nominal Frequency Range
    • 12 - 28 GHz Useable Frequency Range
    • 50 Ω SMA Connector
    • For increasing sensitivity at fieldstrength-measurements
    • For general attenuation measurements up to 28 GHz (useable frequency range)
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Microwave Frequency Range of 18 GHz to 40 GHz
    • Low Noise Figure: 3.7 dB
    • High Gain: 42 dB minimum
    • Low VSWR: 2.25:1 Max
    • Output Power: + 10 dBm @ 1 dB compression
    • Flatness: ± 2 dB
    • Individually Calibrated (gain calibration included)
    Request Quote
    Request Quote/More Info
    Add to Compare
Showing 1 - 6 of 6 items