> Manufacturers>EM Test (Ametek CTS)>EM Test Coupling Networks
EM Test Coupling Networks

EM TEST offers a large variety of coupling/decoupling networks for different test applications for single phase and three-phase mains supplies as well as for signal/data lines and telecommunication lines. Apart from the standard coupling/decoupling networks EM TEST also provides special solutions for higher supply voltages (e.g. 3x690VAC or up to 1,000V DC) and higher currents (up to 100A and more) or for higher surge voltages up to 12kV.

EM Test Coupling Networks There are 11 products.

Showing 1 - 11 of 11 items
  • Quick view
    • AE: 4mm safety lab connector
    • EUT: 4mm safety lab connector
    • AC: max. 250 Volts, 16/32/50/75/100 Amps
    • DC: max. 1,000 Volts, 16/32/50/75/100 Amps
    • Frequency 150 kHz - 230 MHz (up to 80 MHz on higher power models)
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • AE: IEC 60320/C14 connector
    • EUT: 4mm safety lab connectors
    • AC/DC: max. 1,000 Volts / 100 Amps
    • For 2 AC/DC supply lines
    • Frequency 150 kHz - 300 MHz (down to 10 kHz optional)
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For 2 or 3 AC/DC supply lines (switchable)
    • AE: IEC 60320/C14 connector
    • EUT: 4mm safety lab connectors
    • AC/DC: max. 240 V/32 A
    • Frequency 150 kHz - 230 MHz
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For 4 AC supply lines (L1/L2/L3/PE or N)
    • AE: 4mm safety lab connectors
    • EUT: 4mm safety lab connectors
    • AC: max. 3 x 400 V/16 A
    • DC: max. 1,000 V/16 A
    • Frequency 150 kHz - 230 MHz
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For 5 AC supply lines (L1/L2/L3/N/PE)
    • AE: 4mm safety lab connectors
    • EUT: 4mm safety lab connectors
    • AC: max. 3 x 750 Volts / 100 Amps
    • DC: max. 1,000 Volts /100 Amps
    • Frequency 150 kHz - 230 MHz (up to 80 MHz on higher power models)
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For 1 screened coaxial line
    • AE/EUT: BNC, N-Type, SMA connectors 50 ohm (BNC & N-Type available for 75 Ohm)
    • AC/DC: max. 100 V/0.25 A
    • Frequency 150 kHz - 230 MHz
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For 4 screened lines
    • AE/EUT: BNC-connectors, USB (A/A) connectors, Sub-D9 connectors
    • AC/DC: max. 100-125 Volts / 1-1.5 Amps
    • Frequency: 150 kHz - 80 MHz (USB: 150 kHz - 230 MHz)
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For screened cables, 9 lines
    • AE: USB 3.0 (B) connectors
    • EUT: USB 3.0 (A) connectors
    • AC/DC: max. 100 V /1 A
    • Frequency 150 kHz - 230 MHz
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For screened cables: 8 lines, 9 lines, 15 lines, 25 lines, 37 lines, 50 lines
    • AE/EUT: VGA, HDMI, RJ45, Sub-DXX connectors
    • AC/DC: max. 125 Volts / 1.5 amps
    • Frequency 150 kHz - 230 MHz
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Combined coupler for EFT/Burst and Surge testing
    • Surge as per ANSI/IEEE C62.41 (models CNI 501Bx only, other couplers on request)
    • LEDs indicate active mode and coupling
    • Automatic selection of Surge impedance
    • Fully remote controlled by EM TEST generators
    • Meet requirements up to 1,000V DC
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Combined coupler for EFT/Burst and Surge testing
    • Surge as per ANSI/IEEE C62.41 (models CNI 501Bx only, other couplers on request)
    • LEDs indicate active mode and coupling
    • Automatic selection of Surge impedance
    • Fully remote controlled by EM TEST generators
    • Meet requirements up to 1,000V DC
    Request Quote
    Request Quote/More Info
    Add to Compare
Showing 1 - 11 of 11 items