Quick Links

Information

International Compliance Standards (IEC/EN)

Nowadays, it is good practice to certify any consumer product, be it commercial electronics or an electric guitar. Posting the CE, UL or other compliant mark on your product is looked at by distributors and consumers alike. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the international compliance standards available at The EMC Shop.

International Compliance Standards (IEC/EN) There are 109 products.

Subcategories

  • EN/IEC 61000-3-2

    Meet harmonics and flicker test standards IEC 61000-3-3 using the same power source. "Electromagnetic compatibility (EMC) - Part 3-2 Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)"

    Harmonics & Flicker Classification:

    Equipment can be grouped into one of 4 classes based on the following criteria as evaluated by the IEC committee members:

    • Number of pieces of equipment in use (how many (volume) are being used by consumers)
    • Duration of use (number of hours in operation)
    • Simultaneity of use (are the same type of equipment used on the same time frame)
    • Power consumption
    • Harmonics spectrum, including phase (how clean or distorted is the current drawn by the equipment)

    After all the above criteria are taken into consideration equipment are classified as follows:

    • Class A
      • Balanced three-phase equipment
      • Household appliances, excluding equipment identified by Class D
      • Tools excluding portable tools
      • Dimmers for incandescent lamps
      • Audio equipment
      • Everything else that is not classified as B, C or D
    • Class B
      • Portable tools
      • Arc welding equipment which is not professional equipment
    • Class C
      • Lighting equipment
    • Class D
      • Personal computers and personal computer monitors
      • Television receivers

    Get EMC Compliance Standards Support, Pricing, Lead Time and More: Contact Form

  • EN/IEC 61000-3-3

    EN/IEC 61000-3-3: Limitation of voltage changes, fluctuations and flicker in public low-voltage supply systems

  • EN/IEC 61000-4-2

    EMC testing equipment to certify and comply to EN/IEC 61000-4-2: Electrostatic Discharge (ESD) Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment.

    ESD Simulator Models:

    3ctest ESD Guns

    EM Test ESD Generators

    EMC Partner ESD Guns

    Haefely Electrostatic Discharge Test Systems (ESD)

    Teseq ESD Simulators

    and more!

    Get EMC Compliance Standards Support, Pricing, Lead Time and More: Contact Form

  • EN/IEC 61000-4-3

    The EMC Shop will configure a turnkey test system to allow for radiated immunity and susceptibility to any field strength and any frequency range inside or outside the IEC 61000-4-3 requirement. Rent or purchase, new or used, EMC testing equipment to certify and comply to EN/IEC 61000-4-3: Radio Frequency (RF) Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment

  • EN/IEC 61000-4-4

    EMC testing equipment to certify and comply to EN/IEC 61000-4-4: Electrical Fast Transient (EFT)/Burst Immunity Test. Rent or buy transient generators for electrical fast transient/burst test at The EMC Shop. Order online or contact us for stock status or application support.

    Video Overview: Intro to EFT - Setting up Generator and Coupling Clamp

    Get Application Support, Pricing, Lead Time and More: Contact Form



    Transient generators are typically benchtop, but heavy equipment. When doing testing on three phase power lines systems usually require much larger coupling/decoupling networks which substantially increase system size. EM test environments with ground planes with connections to earth are required to safely use transient generators.



    Common EFT/Burst Equipment

    • Electrical Fast Transient Generators: Generators for IEC 61000-4-4, typically in 4kV or 8kV models
    • EFT Coupling Clamp: Required for testing data lined to IEC 61000-4-2.
    • Calibration Adapaters: Used to calibrate or verify EFT generator output.
    • Transducer Plate: Used to calibrate EFT/Burst system at coupling clamp.
    • Test Setup: Test table, coupling clamps, etc.

  • EN/IEC 61000-4-5

    EMC testing equipment to certify and comply to EN/IEC 61000-4-4: Surge Immunity Testing. The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 61000-4-6

    The EMC Shop stocks all-in-one test solutions from Teseq, EM Test, Schloeder and PMM as well as offers turn-key pacakages utilizing homegrown software and any combination of RF power amplifiers, signal generators, power meters and additional components for a flexible, expandable system. Contact us now for more information on EMC testing equipment to certify and comply to EN/IEC 61000-4-6: Conducted RF Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 61000-4-7

    EMC testing equipment to certify and comply to EN/IEC 61000-4-7: Harmonics and Flicker Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 61000-4-8

    EMC testing equipment to certify and comply toEN/IEC 61000-4-8: Immunity to Magnetic Fields (30 A/m). The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 61000-4-9

    EMC testing equipment to certify and comply to EN/IEC 61000-4-9 pulsed magnetic field test. The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 61000-4-10

    IEC 61000-4-10 describe an oscillating magnetic field generator. The oscillating magnetic field is used to test the immunity of electronic equipment to be installed in high voltage sub-stations.

  • EN/IEC 61000-4-11

    EMC testing equipment to certify and comply to EN/IEC 61000-4-11: AC Dips, Interrupts & Variations. The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 61000-4-12

    EMC testing equipment to certify and comply to EN/IEC 61000-4-12: Ring Wave Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 61000-4-16

    Rent or buy test equipment for conducted immunity - common mode distubrances per IEC 61000-4-16 at The EMC Shop. Order online or contact us for stock status or application support.

    Get Application Support, Pricing, Lead Time and More: Contact Form



    IEC 61000-4-16 Equipment

    • Integrated Systems: High dollar integrated systems with:
    • Signal Generators: Low frequency signal generator to generate signals per IEC 61000-4-16
    • RF Power Amplifiers: Low Frequency power amps.
    • CDN's: Coupling/Decoupling networks for telecom and power lines.
    • Test Setup: Test table, coupling clamps, etc.

  • EN/IEC 61000-4-18

    EMC testing equipment to certify and comply to EN/IEC 61000-4-18: Damped Oscillatory Wave Immunity Test. The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 61000-4-19

    Rent, buy or lease IEC/EN 61000-4-19 test equipment for Immunity to Conducted, Differential Mode Disturbances and Signalling in the Frequency Range 2 kHz to 150 kHz on AC Power Ports. The EMC Shop specializes in equipment for RF conducted immunity testing.

  • EN/IEC 61000-4-20

    IEC 61000-4-20 relates to emission and immunity test methods for electrical and electronic equipment using various types of transverse electromagnetic (TEM) waveguides. These types include open structures (for example, striplines and electromagnetic pulse simulators) and closed structures (for example, TEM cells).

  • EN/IEC 61000-4-29

    EMC testing equipment to certify and comply to EN/IEC 61000-4-29: DC Drops, Dips & Interruptions Immunity Testing. The EMC shop is the only online store for electromagnetic compliance test equipment.

  • EN/IEC 62132

    EN/IEC 62132 RF Immunity Test Methods:

    • Radiated Immunity—TEM cell method. IEC 62132-2 defines a method of measuring an IC's immunity to radiated emissions. To test an IC using this method, you mount the DUT on the test board and install it in a mating port cut in the top or bottom of a TEM cell or GTEM cell. You must test the DUT in at least two orientations to ensure complete exposure to the generated electric field.
    • Conducted Immunity—Bulk Current Injection (BCI) method. IEC 62132-3 defines a method of evaluating immunity of the DUT to electromagnetic fields coupled to cables or cable bundles connected to the package pins. You can use this method to evaluate the immunity of IC pins connected to cables and also to evaluate other pins as well. The test signal is inductively coupled to the pin or pins under test using a current probe. Since you must connect the pins of the DUT to a cable or wire to inject the test signal, you can use a DUT application board or an IC EMC test board to perform this test.
    • Conducted Immunity—Direct RF Power Injection (DPI) method. IEC 62132-4 also defines a method of evaluating immunity of the DUT to electromagnetic fields coupled to cables or cable bundles connected to the package pins. When using this method, however, you directly inject the test signal using capacitive coupling to inject the signal on the cable or wire. The DUT can be mounted on either an IC EMC test board or an application board.
    • Conducted Immunity—Workbench Faraday Cage (WBFC) method. IEC 62132-5 defines a method for evaluating the immunity of an IC to signals injected at defined common-mode points. The DUT can be mounted on either an IC EMC test board or an application board, provided the board fits in the cage. With all input, output, and power connections to the test board filtered and connected to common-mode chokes, you must inject the conducted noise at PCB locations specified by the standard.
    • DPI (Direct Power Injection) (62132-4) widely used technique, especially in automotive applications.

    The DPI test method is popular sice the DPI testing is very simple and straightforward to perform, and DPI testing can be easily simulated by chip designers using their standard design tools.

    Turn Key Solution

    Turnkey IEC 62132 Solution for DPI, BCI and other Test Methods.

    The EMC Shop will provide complete turn-key solutions for compliance testing in accordance with EN/IEC 62132-X standards about 150 kHz to 1 GHz frequency range.

    Get Application Support, Pricing, Lead Time and More: Contact Form

per page
Showing 1 - 12 of 109 items
    • VCS 500M10 10kV Combination Wave Surge Simulator
    • TSS 500M10 Telecom Surge Generator
      • 10 / 700us pulse according to IEC/EN 61000-4-5
      • Test voltage up to 10kV
      • Compliant with ITU-T standard for enhanced test level
      • Complies with FCC part 68 (Surge B pulses)
    • CWS 500 Continuous Wave Simulator
      • RF Conducted Simulator 150kHz to 230 MHz per IEC/EN 61000-4-6
      • Built-in dual directional coupler
      • Automatic calibration via built-in power meter
    • EFT 500 Electrical Fast Transient Generator
    • PFS 500 Voltage Dips and Drop Interruptions
    Request Quote/More Info
    • Rentals Ship Immediately
    • 2-Day Free Transit
    • Auto Invoicing of Rental Rate each Month
    • Package Includes:
      • Air Discharge Capability: 16.5 kV
      • Contact Discharge Capability: 9 kV
      • Tripod Mount
      • Traceable Calibration Certificate

    $590.00
    Request Quote/More Info
    • Integrated signal generator 9 kHz to 1 GHz
    • 3 power meter inputs 9 kHz to 1 GHz
    • Integrated power amplifier module for different applications
    • Multiple EUT monitoring options
    • Optional built-in amplifier up to 75 watts (150 kHz - 230 MHz)
    • Meet IEC 61000-4-6,  IEC 61000-4-3, IEC 61000-4-20, IEC 61000-4-21 
    • Meet Mil-STD 461 CS114
    Request Quote/More Info
  • $1,960.00
    Request Quote/More Info
    • EMC RF Generator
    • USB RF Power Sensor 6630
    • Field Probe EP-60x
    • Fiber Optic Adapter 6630FOA
    Request Quote/More Info
  • Quick view
    $841.50 $990.00 -15%
    $841.50 $990.00 -15%
    Reduced price!
    Request Quote/More Info
    • AE: 4mm safety lab connector
    • EUT: 4mm safety lab connector
    • AC: max. 250 Volts, 16/32/50/75/100 Amps
    • DC: max. 1,000 Volts, 16/32/50/75/100 Amps
    • Frequency 150 kHz - 230 MHz (up to 80 MHz on higher power models)
    Request Quote/More Info
    • Compatible with Teseq's NSG 3040, NSG 3060 systems
    • Use with Teseq CAS 3025
    • Complies with IEC 61000-4-4 Ed 2.0 2004
    • Complies with IEC 61000-4-4 Ed 3.0 2012
    • Safety cover with interlock
    • Calibration kit per IEC 61000-4-4 Ed 3.0 2012
    $299.00
    Request Quote/More Info
    • Output Voltage: 0.2 – 5.0 kV
    • Automated test modes, software assisted test preparation, predefined test routines and visual aided test setups
    • Automatic generation of test report, including test parameters, test setup and test result
    • IEC/EN 61000-4-4
    • IEEE/ANSI C62.41
    • IEC/EN 61850-3
    • Easily expanadable to add Surge (IEC 61000-4-5) and/or PQT (IEC 61000-4-11 & IEC 61000-4-29)
    Request Quote/More Info
  • Request Quote/More Info
    • IEC/EN 61000-4-18 & ANSI C37.90.1 
    • 100 kHz and 1 MHz oscillation frequency from 0.2 to 4.4 kV
    • Selectable source impedance of 200 Ω and 150 Ω
    • Pulse repetition rate exceeds standards requirement
    • Quickly launch tests from extensive Standards Library or User Test folders
    • Easy-to-operate 7“ touchscreen color display
    Request Quote/More Info
  • Request Quote/More Info
Showing 1 - 12 of 109 items