> Manufacturers>3ctest>3ctest Oscillatory Wave Simulators
3ctest Oscillatory Wave Simulators

3ctest offers slow/fast damped oscillatory wave simulators and ring wave simulators for IEC 61000-4-12, IEC 61000-4-18, ANSI C37.90 and more.

3ctest Oscillatory Wave Simulators There are 12 products.

Showing 1 - 12 of 12 items
  • Quick view
    • 5.7 inch color touch screen front panel operation
    • ultra-compact simulator up to 6.0KV 
    • internal three-phase CDN, current up to16A
    • LAN Ethernet port for remote control
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • MIL-STD 461 CS116 Compliant
    • 5.7" touch screen
    • 17 waveform variations
    • 10 kHz - 100 MHz
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5.7 inch color touch screen front panel operation
    • output voltage up to 3.3kV
    • internal automatic high power three-phase CDN with good load capacity and decoupling performance
    • impulse current can be 1.5 times of rated current for CDN
    • internal failure warning function
    • LAN Ethernet port for remote control
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5.7 inch color touch screen front panel operation
    • compact simulator up to 3.3kV
    • Coupling Decoupling Network (see CDN section below)
    • LAN Ethernet port for remote control
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Color touch screen 7 inch LCD 
    • Automatic control system
    • Intelligent HV mains charging mode 
    • Four test waveforms in one, standalone test 
    • Contactless discharging switch, no discharging noise 
    • Internal automatic single phase CDN
    • 22U Standard 19 inch mobile cabinet installation
    • RS232 Communication port for remote control

    Standard

    • TIA-968B
    • FCC part 68
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Color touch screen 10inch LCD
    • PLC control and fully automatic control system
    • Multiple automatic fault judgment, sound and light alarm
    • Double discharge switch and wide range of output, min. up to 500V 
    • RS232 communication interface for remote control
    • Can be optional for MDO3012 oscilloscope to calculate waveform parameters automatically for measurement analysis system，
    • Can be optional for single phase CDN 
    • 19 inch standard cabinet

    Standard

    • IEC 61000-4-5
    • GB/T 17626.5
    • GB/T 16927.1
    • ITU T K.44
    • ITU-T K.21
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • LCD display and touch screen with easy to operate
    • Programmable high voltage power supply with high stability and display the breakdown current and voltage
    • With imported non-inductance high power resistance to ensure surge waveform consistency
    • Automatically switching positive or negative polarity
    • Freely set the surge injection phase angle 0-360° 
    • Internal current and voltage probe，BNC connection to oscilloscope to observe waveforms
    • Optional for kinds of waveform module
    • RS-232communication interface, for remote control, optional for measurement control system software

    Standard

    • IEC 61000-4-5
    • IEC 61643-1
    • IEC 61010
    • IEC 60664
    • GB/T 17626.5
    • GB/T 16927.1
    • ITU-T K.21
    • ITU T K.44
    • ITU T K.45
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5.7 inch colorful touch screen operation
    • Oscillation frequency 3MHz/10MHz/30MHz，test voltage up to 4.2kV 
    • Internal three phase CDN，max. current up to 16A
    • Optional for external three phase CDN up to 32A
    • LAN Ethernet interface, can be used for remote control
    • Meet the requirements of immunity test equipments for enterprise, institution and testing organization.

    Standard

    • IEC 61000-4-18
    • IEC 255-22-1
    • GB/T 14598.13
    • ANSI C37.90
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5.7 inch color touch screen front panel operation
    • Internal EFT/burst module 
    • Internal micro-pulse module 
    • As per ISO 7637 JASO SAE NISSAN 
    • Internal 60V/30A CDN（incl. load dump coupling, Max. Current up to 200A (200A customized) 
    • Via CN25 Control external load dump and battery simulation via CN25
    • DUT voltage and current detection and over current protection function
    • Emergency stop function 
    • internal mains switch 
    • Ethernet, RJ45 port for remote control, print and documentation.
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • For the test of ISDN, 10/100/1,000MBit/s Ethernet
    • Test output to 1 pair, 2-pair or 4-pair communication line;
    • Compatible to output port of other generators for communication test
    • No need to extra protect AE

    Standard

    • IEC 61000-4-18
    • GB/T17626.12
    • EN61000-4-18
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Color Touch Screen 7 inch LCD
    • PLC control system, automatic control system
    • Current and voltage LCD display 
    • One-button test with programmable function
    • RS232 communication port for remote control
    • Internal ground device and safety lock
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Meet the tests as per ISO16750 (corresponding individual manufacturer standard)
    • Every oscillation channel has waveform arithmetic circuitry to output waveform with high resolution and accuracy
    • By software control with Ethernet, represent kinds of variation phenomenon easily and really.
    • Ensure the synchronization deviation among channels to be less than 1μs
    • Waveform data (CSV) received from oscilloscope can be output with high accuracy.

    Application

    • Automotive
    Request Quote
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 12 items