> Manufacturers>PMM / Narda

PMM / Narda

Quick Links

Information

PMM / Narda

PMM is an Italian manufacturer of EMC Test Equipment and is sister companies with Narda Safety Solutions, a manufacturer of safety equipment against RFI and radiation.

PMM / Narda There are 53 products.

Subcategories

  • PMM EMC Receivers

    PMM/Narda offers a full range of FULL and PRE compliance receivers, even with FFT technology, covering the range 10 Hz - 18 GHz. As a small size, flexible and reliable, even with built-in LISN, allow you to perform conducted and radiated test in full compliance CISPR 16-1-1 and MIL-STD.

    The EMC Shop stocks PMM/Narda EMC receivers for rental or sale.

  • PMM LISN's

    With its decades experience as manufacturer, PMM/Narda offers a wide range of LISN (Line Impedance Stabilization Network) capable to arrive up to frequency of 400 MHz. The LISN Narda are multistandard and meet the requirements of different regulations: CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461F, CISPR 25 / ISO 11452-2/4/5, ISO 7637-2, MIL-STD-461F, DO-160, ED-14G

  • PMM EMC Antennas

    With compact size, low weight, a simple mounting system and change of polarization, the Narda/PMM EMC antennas are ideal to be used with EMI receivers up to a frequency of 18 GHz. Robust and dust-proof, are also available in practical and economic "Antenna Set" to cover, in a unique way, the full frequency range.

  • PMM Immunity Systems

    Specially designed to meet specific regulations, Narda/PMM EMC immunity systems offer a simple solution at low cost. Designed with a philosophy of a "modular approach" provide several benefits for future upgrades while remaining compact.

  • PMM RF Electric Field Probes

    Exceptionally small-sized spherical symmetrical configuration, lightweight and miniaturized electronics combined with excellent RF characteristics make the Narda/PMM RF Electric Field Probes the ideal solution for all EMC/EMI applications, chambers and TEM/GTEM cells.

per page
Showing 1 - 12 of 53 items
  • Quick view
    • Electric Field and Magnetic Flux Density Analysis from 5 Hz to 100 kHz
    • Isotropic Measurements with a Dynamic Range of 140 dB
    • Small Size and Optical Fiber Connection for Accurate, Repeatable Measurements
    • Built-in FFT Spectrum Analysis
    • Three (Narrowband, Broadband and Marker) Detection Modes
    • Internal Memory for Stand Alone Measurements
    • Interfaces to PC and Pocket PC
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • EMC RF Generator
    • USB RF Power Sensor 6630
    • Field Probe EP-60x
    • Fiber Optic Adapter 6630FOA
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Conductive immunity test system with optional CDN, EM Clamp and or Current Injection Clamp
    • Meet IEC 61000-4-6 or MIL-STD-461 CS114
    • Easy to setup and use of software
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 300 kHz to 18 GHz
    • Up to 60 dB dynamic, single range
    • 0.17 to 170 V/m (350 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.4 dB typical)
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Weighs less than an ounce
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5 kHz to 9.25 GHz
    • Up to 60 dB dynamic, single range
    • 1.5 to 1,500 V/m (3,000 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.4 dB typical)
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Weighs less than an ounce
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz a 30 MHz frequency range
    • 63 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including IEC 60309, UL1682, UL1686
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 800 MHz to 6 GHz frequency range
    • Excellent Antenna factor
    • Tripod adapter for easy vertical - horizontal polarization change
    • Individual calibration
    • Robust, rustproof aluminium construction
    • Lightweight
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Up to 60 dB dynamic, single range
    • 0.14 to 140 V/m (300 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.2 dB typical)
    • Up to 40 meters communication by Fiber Optic Cable
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Extremely lightweight: 22 grams only!
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view

    PMM HP-032 Isotropic H-Field Sensor 100 kHz - 30 MHz, 20 mA/m - 20 A/m, traceable calibration. Requires OR-03.

    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view

    PMM HP-102 Isotropic H-Field Sensor 30 MHz - 1 GHz, 20 mA/m - 20 A/m, traceable calibration. Requires OR-03.

    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 9 kHz to 30 MHz frequency range
    • Antenna CISPR 12, CISPR 16, CISPR 25, MIL-STD, DO-160 fully compliant
    • Internal full CISPR 16-1-1 receiver
    • Embedded attenuator, preamplifier and preselectors
    • Fiber optic serial link to 9010F series or directly to PC
    Request Quote
    Request Quote/More Info
    Add to Compare
Showing 1 - 12 of 53 items