PMM RF Electric Field Probes

Exceptionally small-sized spherical symmetrical configuration, lightweight and miniaturized electronics combined with excellent RF characteristics make the Narda/PMM RF Electric Field Probes the ideal solution for all EMC/EMI applications, chambers and TEM/GTEM cells.

PMM RF Electric Field Probes There are 29 products.

per page
Showing 1 - 12 of 29 items
    • Meausurement up to 1300 V/m CW
    • Dynamic Range: 64 dB
    • Flatness: ±1 dB (1 MHz - 1 GHz), ±1.25 dB (1 - 2.45 GHz)
    • Isotropic Response: ±1 dB
    In Stock
    Request Quote/More Info
    • Measurement Range: 8 to 614 V/m
    • Dynmaic Range: 37 dB
    • Flatness: ±1.25 dB
    • Isotropic Response: ±1 dB
    • Ideal for Satellite Communication, Leak Detection and Exposure Levels (Partially suitable for Radar Signals)
    In Stock
    Request Quote/More Info
    • Measurement Range: 8 to 614 V/m
    • Dynamic Range: 37 dB
    • Flatness: ±1.25 dB
    • Isotropic Response: ±1 dB
    • Ideal for Satellite Communication, Leak Detection and Exposure Levels (Partially suitable for Radar Signals)
    In Stock
    Request Quote/More Info
    • Hand Strap & Safety Lanyard Mount 
    • E100 Isotropic E-field probe, 100 kHz - 5 GHz, 0.3 - 800 V/m
    • H210 Isotropic H-Field Probe, 5 - 300 MHz, 30 mA/m - 10 A/m
    • Fitted Carry Case
    • Small/Lightweight for Minimal Field Perturbance 
    • Broadband Frequency Range
    • One Hand Operation
    • ¼ X 20 UNC Tripod Mount
    $7,500.00
    Typically Stocked
    Request Quote/More Info
    • Broadband measurements DC - 60 GHz With RMS and isotropic field probes
    • Spectrum analysis DC - 400 kHz Real-time FFT
    • Weighted Peak Method (WPM) Real-time comparison in % with the selected limits
    • Assessments according to European Directive 2013/35/EU In accordance with international standards: ICNIRP, IEC, EN, IEEE, etc.
    • High performance GPS Integrated in the instrument
    • USB and Fiber Optic Communication PC software included
    In Stock
    Request Quote/More Info
    • Frequency range 300 kHz to 100 MHz
    • Band coverage 0.3 - 1.0 MHz, 1.0 - 20 MHz,20 - 80 MHz, 80 - 100 MHz
    • Measurement range: 0.1 bis 100 mW/cm² E field, 0.2 bis 200 mW/cm² H field
    • Special feature(s): Zero alignment at a keypress
    • Display units mW/cm², W/m², V/m, A/m
    Typically Stocked
    Request Quote/More Info
    • Exposure level measurements for compliance testing - Time domain evaluation as per IEC62233 and EN 50366
    • A choice of two tri-axial isotropic magnetic field sensors
    • Bundled with PC application offering RMS logging, batch export and tester setup functions.
    • Magnetic flux density (Band) 10 Hz to 400 kHz / 10Hz to2 kHz / 2kHz to 400 kHz
    • Selectable Magnetic Flux Density Units: Select T (Tesla), G (Gauss) or A/m
    • Measurement ranges Magnetic flux density : 2.000µT/ 20.00µT/200.0µT/2.000mT
    • Exposure level : 20.00%/200.0%/2000%
    • Display Indicated axis (x,y,z,R) / Magnetic flux density / Exposure level (LCD Display)
    Typically Stocked
    Request Quote/More Info
    • Intelligent probe interface detects probe parameters
    • Fully automatic zero point adjustment
    • Memory for saving up to 5,000 measurement results
    • PC software for convenient data management
    • Voice recording for comments
    • Conditional logging: Measured value saved when a threshold value is exceeded
    Typically Stocked
    Request Quote/More Info
  • Quick view
    $650.00 Monthly
    • New - Old Stock
    • Intelligent probe interface detects probe parameters
    • Fully automatic zero point adjustment
    • Memory for saving up to 5,000 measurement results
    • PC software for convenient data management
    • Voice recording for comments
    • Conditional logging: Measured value saved when a threshold value is exceeded
    $650.00
    In Stock
    Request Quote/More Info
    • Intelligent probe interface detects probe parameters
    • Fully automatic zero point adjustment
    • Memory for saving up to 5,000 measurement results
    • PC software for convenient data management
    • Voice recording for comments
    • Conditional logging: Measured value saved when a threshold value is exceeded
    In Stock
    Request Quote/More Info
  • PMM EP-408 Isotropic E-Field Sensor 1 MHz - 40 GHz, 800 V/m. Sensitivity: 0.8 V/m, traceable calibration. Requires OR-03.

    In Stock
    Request Quote/More Info
    • 5 kHz to 9.25 GHz
    • Up to 60 dB dynamic, single range
    • 1.5 to 1,500 V/m (3,000 V/m Overload)
    • Symmetrical dipole configuration
    • Excellent isotropy (down to 0.4 dB typical)
    • Up to 80 hours of operation before recharging
    • High performance, high reliability Li-Mn battery
    • PC direct connection via Optical to RS232/USB adapters
    • Weighs less than an ounce
    Typically Stocked
    Request Quote/More Info
Showing 1 - 12 of 29 items