Radiated Immunity

Radiated immunity has several sub methods of testing depending on the standard and type of DUT. Most common standards used include IEC/EN 61000-4-3, MIL-STD 461 RS101/03/05, SAE J113/4, ISO 11451-2, ISO 11452-4/5 and CISPR 20. The EMC Shop provides turn key systems to meet most any radiated immunity standards as well as stand alone radiated immunity test equipment.

Radiated Immunity There are 59 products.

Subcategories

  • Turn Key Test Systems

    Radiated immunity has several sub methods of testing depending on the standard and type of DUT. Most common standards used include IEC/EN 61000-4-3, MIL-STD 461 RS101/03/05, SAE J113/4, ISO 11452-2 and CISPR 20. The EMC Shop provides turn key systems to meet most any radiated immunity standards as well as stand alone radiated immunity test equipment.

  • Radiated Immunity Integrated Test Systems

    The EMC Shop stocks Radiated Immunity Integrated Test Systems for EMC applications.

  • EMI Antennas

    The EMC Shop stocks most high power EMI antennas for radiated immunity compliance testing to standards such as MIL-STD-461 RS103, IEC 61000-4-3 and more. Rent, buy or lease individual EMI antennas or order a complete turn key systems for RF immunity testing.



    Get Application Support, Pricing, Lead Time and More: Contact Form



    Electromagnetic immunity (EMI) involves both E-Field (Electric) and H-Field (Magnetic) antennas capable of handling input from high power RF amplifiers. Most modern EMI antennas are exteremely broadban cutting down the amount of antennas (cost) and time to setup and recalibrate your shielded environment.



    EMI Antenna Type's

    • BiLogs: Combining biconical and log periodic chassis to cover most commercial compliance requirements.
    • Horn Antennas: Ideal for high frequency susceptiblity testing - typically for Military and Avionic standards.
    • Monopoles: The most efficient way to transmit in low frequency ranges (non-directional)

  • GTEM Cells / TEM Cells

    Transverse Electro-Magnetic (TEM) cell for EMI and EMC testing. Also known as the Crawford Cell. The TEM cell is used to generate accurate electro-magnetic waves over a wide frequency range: DC (0 Hz) to several MHz. EM waves generated in the cell propagate in transverse mode and have the same characteristics as a plane wave. It can be used to calibrate E-field broadband probes for testing radiated E-field immunity as well as for measuring radiated emission from a product with a spectrum analyzer/EMI receiver.

  • Magnetic Field Generation

    Magnetic Field Generation

  • Stripline for Radiated Immunity

    Strip Lines are made for the generation of homogeneous electromagnetic fields and specified in ISO 11452 part 5 and EU guidelines 95/94. The strip lines can be used for testing of electrical/electronic submodules (EUB) and their associated cables.

  • Accessories

    Accessories

per page
Showing 1 - 12 of 59 items
    • Integrated signal generator 80 MHz to 6 GHz
    • Integrated RF switch network
    • Integrated 3 freely configurable pulse modulators (1 μs to 200 s) for radar pulse profiles
    • Multiple EUT monitoring options
    • 3.5“ TFT color display
    • Safety interlock function
    • Remote control via USB, RS232 or LAN
    Request Quote/More Info
    • Turn key solutions for easy and quick setup and testing
    • Meet Levels 1, 2, 3 of IEC 61000-4-20
    Request Quote/More Info
    • Monthly Rental - Ships Immediately
    • CDN, BCI Probe or EM Clamp Required to complete test setup
    • Meet RF & Conducted Immunity Compliance Standards:
      • EN/IEC 61000-4-6
      • MIL-STD461 CS114
      • RTCA/DO160 Section 20
      • ISO 11452 part 4 BCI
      • ISO 11452 part 5 Stripline
      • IEC 60601-1-2
      • EN 61000-6-1/EN 61000-6-2
      • Various Automotive Manufacturer's Specifications
    Request Quote/More Info
    • Integrated signal generator 9 kHz to 1 GHz
    • 3 power meter inputs 9 kHz to 1 GHz
    • Integrated power amplifier module for different applications
    • Multiple EUT monitoring options
    • Optional built-in amplifier up to 75 watts (150 kHz - 230 MHz)
    • Meet IEC 61000-4-6,  IEC 61000-4-3, IEC 61000-4-20, IEC 61000-4-21 
    • Meet Mil-STD 461 CS114
    Request Quote/More Info
    • Test Systems in stock, available to ship today
    • Pre-certification or Fully Compliant Solutions Available
    • Rent, buy or lease
    • Advanced Technical Support
    Request Quote/More Info
    • Most compact equipment for ripple noise on ac/dc supplies and magnetic fields
    • Built-in LF signal generator
    • Built-in LF amplifier
    • Built-in LF transformer 2:
    • Built-in frequency-selective voltage and current meter
    • Built-in load resistors
    • Automatic self-calibration
    • Frequency Range: 10 Hz - 250 kHz
    Request Quote/More Info
    • Frequency Range: 170 MHz - 3 GHz
    • Antenna Factor: 11 to 33 dB/m
    • Gain: 0 to 10.9 dBi
    • Maximum Continuous Power: 800 Watts
    • Impedance: 50 Ohms
    • Max Radiated Field: 200 V/m (500 V/m with optional 7/16 DIN female connector)
    • Connector: N-Type, female
    • Receive and Transmit
    • Individually Calibrated (1, 3 & 10 Meter calibration included, horizontal polarization)
    • Linearly Polarized
    Request Quote/More Info
    • Easily adjust and redirect EMC antenna
    • Leveling bubble
    • Metal construction
    • Standard 1/4-20 mounting threads
    • 4" mounting surface
    • Weight: 0.7 lbs (317g)
    Request Quote/More Info
    • Rugged Maple wood construction
    • Standard 1/4-20 mounting thread
    • Reversible legs: Rubber feet for lab use, spike tips for outdoor testing
    • lightweight and durable wooden legs
    • Rugged Construction
    • Folded Height: 40" (101 cm)
    • Max Height: 64" (163 cm)
    • Weight: 11.3 lbs (5.1 Kg)
    Request Quote/More Info
    • Easily adjust and redirect EMC antenna
    • Leveling bubble
    • Nylon construction
    • Standard 1/4-20 mounting threads
    • 4" mounting surface
    • Weight: 0.7 lbs (317g)
    Request Quote/More Info
    • Rugged Maple wood construction
    • Standard 1/4-20 mounting thread
    • Reversible legs: Rubber feet for lab use, spike tips for outdoor testing
    • lightweight and durable wooden legs
    • Rugged Construction
    • Folded Height: 25" (64 cm)
    • Max Height: 62" (158 cm)
    • Weight: 10.2 lbs (4.6 Kg)
    $1,475.00
    Request Quote/More Info
    • Frequency Range: 80 MHz - 6 GHz
    • Maximum Continuous Power: 5,000 Watts
    • Impedance: 50 Ohms
    • Typical VSWR: 2.0:1 (Max: 3.0:1) 
    • Max Radiated Field: 1,000 V/m
    • Power Gain (over isotropic): 6 dB
    • Gain Flatness: ±1.5 dB 
    • Pattern Type: directional
    • Connector: N-Type, C-Type, 7-16, 1-5/8 EIA (female)
    Request Quote/More Info
Showing 1 - 12 of 59 items