> Test Equipment>Transient Generators>Burst/EFT Generators>8 kV EFT / Burst Generators
8 kV EFT / Burst Generators

8 kV Fast Transient (EFT)/Burst generators are utilized for advanced susceptibility testing for industrial or commercial electronics that coule be exposed to higher power EFT /Burst transients. The EMC Shop stocks all types of (EFT)/Burst generators for compliance and pre-compliance testing. Rent or buy (EFT)/Burst generators for individual tests or multifunction generators to complete an assortment of tests in a compact solution. Most systems can be easily upgraded to include additional tests as required.

8 kV EFT / Burst Generators There are 5 products.

Showing 1 - 5 of 5 items
  • Quick view
    • EFT/Burst Test System according to IEC/EN 61000-4-4 Ed. 1 + 2
    • 7.3kV EFT/Burst voltage
    • Built-in single phase coupling/decoupling network
    • Automatic test operation for shortest measuring time and minimal setup effort
    • Data exchange to printer or computer without any additional hardware/software
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • EUT DC load capacity: DC 1500V 100A
    • EUT AC load capacity: AC 700V 100A three -phase five- wire
    • EUT power automatic switching over
    • EUT voltage and current detection
    • Overvoltage, over current and overheating protection
    • Setting test voltage, polarity and phase sync angle by scheduling and fully automatic network switching over
    • Phase angle superposition for any line

    Standard

    • IEC 61000-4-4
    • IEC 61000-6-2
    • IEC 61000-6-1
    • GB/T 17626.4
    • EN 61000-4-4
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • With 3-phase coupler; 3 x 440V/32A
    • Standalone Tester
    • 7,000V Burst voltage
    • Spike frequency 1MHz
    • Built-in 1ph or 3ph coupler
    • USB (optical link) and GPIB interface
    • Standard Test routines

    Applications:

    • Industry
    • Medical
    • Broadcast
    • Residential
    • Telecom
    • Components
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Burst Generator up to 7kV with Built-in CDN 250V 32A
    • Standalone Tester
    • 7,000V Burst voltage
    • Spike frequency 1MHz
    • Built-in 1ph or 3ph coupler
    • USB (optical link) and GPIB interface
    • Standard Test routines

    Applications:

    • Industry
    • Medical
    • Broadcast
    • Residential
    • Telecom
    • Components
    Request Quote
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Industry Best Warranty on Used Test Equipment
    • Try before you bur or rent this Keytek 8kV EFT System
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E421 EFT/Noise Burst Simulator to 8 kV (IEC 61000-4-4)
      • E4554 Burst Coupling up to 8 kV
      • Input voltage: 100V to 240VAC
      • Input Current: 3.5A at 100 V; 1.5A at 240 V
      • User Manual
      • Fresh Calibration Certificate
      • 10% off Calibration Service for Life
    Request Quote
    Request Quote/More Info
    Add to Compare
Showing 1 - 5 of 5 items