Electrical Fast Transients/Burst

Meet Electrical Fast Transient/Burst immunity test standards like IEC/EN 61000-4-4 with stand alone EFT/burst simulators.

Electrical Fast Transients/Burst There are 50 products.

per page
Showing 1 - 12 of 50 items
    • Internal automatic three-phase CDN
    • programmable setup of test parameters
    • controlled external three-phase high current CDN 
    • EFT 500S(single phase network) EFT 500T(three-phase network) 
    • Ethernet,RJ45 port for PC remote control, print and documentation 
    • 0.25kV-4.8kV±10%
    • additional hardware/software
    $1,095.00
    Request Quote/More Info
    • Rentals Ship Immediately
    • NIST Traceable Calibration Certificate
    • Order online now
    • Voltage Range: 0.10 to 4.5 kV
    • Built in Single Phase Coupler
    • Buy Used EFT/Burst Generators
    $895.00
    Request Quote/More Info
    • Output Voltage: 0.2 – 5.0 kV
    • Automated test modes, software assisted test preparation, predefined test routines and visual aided test setups
    • Automatic generation of test report, including test parameters, test setup and test result
    • IEC/EN 61000-4-4
    • IEEE/ANSI C62.41
    • IEC/EN 61850-3
    • Easily expanadable to add Surge (IEC 61000-4-5) and/or PQT (IEC 61000-4-11 & IEC 61000-4-29)
    Request Quote/More Info
    • Open-circuit voltage from 200 to 4.8kV/1MHz
    • 50 Ohm Output Impedance
    • Fully IEC 61000-4-4 compliant
    • Large 7.2" color display and touch panel interface
    • Standards and user test libraries
    • Upgradeable to add Surge (IEC 61000-4-5) and/or PQT (IEC 61000-4-11 & IEC 61000-4-29)
    • NIST Calibration Certificate Included
    Request Quote/More Info
    • IEC/EN 61000-4-5 & ANSI C62.45: SurgeModule up to 5kV
    • IEC/EN 61000-4-4: Burst Module up to 5.5kV
    • IEC/EN 61000-4-11: Dips Interrupts and Variations
    • Built in Single phase 300 Volt/16 Amp coupler
    • Manual operation from front panel
    • USB and GPIB-Bus for remote control
    • Monitor outputs for peak voltage and peak current
    • Fail inputs
    • External variac control 0-10Vdc
    Request Quote/More Info
  • Request Quote/More Info
    • Compatible with Teseq's NSG 3040, NSG 3060 systems
    • Use with Teseq CAS 3025
    • Complies with IEC 61000-4-4 Ed 2.0 2004
    • Complies with IEC 61000-4-4 Ed 3.0 2012
    • Safety cover with interlock
    • Calibration kit per IEC 61000-4-4 Ed 3.0 2012
    $299.00
    Request Quote/More Info
    • Maximum cable size 40mm
    • Minimum test cable length 1m
    • Maximum EFT voltage 8kV
    • Coupling plane mounted on 0.1m insulation block
    • Handy carrying handle
    Request Quote/More Info
    • Rentals Ship Immediately
    • System Configuration:
      • E103 Controller (fiber-interface for remote control)
      • E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
      • E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
      • E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
      • Input voltage: 100V to 240VAC
      • Input Current: 3.5A at 100 V; 1.5A at 240 V
    $975.00
    Request Quote/More Info
    • Monthly Rental - Ships Immediately
    • Verification/calibration kit for IEC/EN 61000-4-4, amendment 2
    • For peak voltages up to 8.8 kV
    • INA 265B: 50 Ω termination, 60 dB attenuation
    • INA 266A: 1 kΩ termination, 66 dB attenuation
    • Compatible with all burst/EFT generators
    $395.00
    Request Quote/More Info
    • 3 Phase Coupler suitable for DUT up to:
      • 32 Amps, 3x 690 Volts AC
      • 32 Amps, 270 Volts DC
    • Voltage up to 4.8 kV
    • Meets Conducted Immunity Standards:
      • ANSI/IEEE C62.41
      • IEC/EN 61000-4-4
      • IEC 60601-1-2
      • IEC 61326
      • IEC 61850-3
    • Pulse verification acc. to Edition 3 on each coupling path
    Request Quote/More Info
    • Suitable for pre-compliance to IEC 61000-4-4
    • Built-in 3 Phase / 30 Amp Coupler
    • Easily Programmable
    • 100 Day Warranty
    • Fresh NIST calibration
    Request Quote/More Info
Showing 1 - 12 of 50 items