Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Used IEC 61000-4-4 EFT/Burst Generators
Used IEC 61000-4-4 EFT/Burst Generators
The EMC Shop specializes in conducted immunity and susceptibility testing. Contact us now for prices on Used IEC 61000-4-4 EFT/Burst Generators.
Used IEC 61000-4-4 EFT/Burst Generators There are 9 products.
Showing 1 - 9 of 9 items
Used EM Test UCS 500M4 Transient Simulator w/ Burst/EFT
1 Unit- Rent online, ship immediately
- EFT/Burst to 4.4 kV per IEC 61000-4-4
- Optioncal Coupling Clamp for Data Line EFT Testing
- Built in CDN for Single Phase DUT
Teseq NSG 3025 Fast Transient/EFT Generator for IEC/EN 61000-4-4
In Stock- Suitable for testing to EN/IEC 61000-4-4
- 100 Day Warranty
- Fresh NIST calibration
Used Haefely PEFT Junior Burst Generator for IEC/EN 1000-4-4
- Order online now
- Voltage Range: 0.10 to 4.5 kV
- Built in Single Phase Coupler
- Suitable for IEC 1000-4-4 (IEC 801-4)
$4,750.00In StockHILO TEST EFTG 4510C Burst Generator 4.4 kV 230V/50Hz Input
Call for Availability- Industry Best 100 Day Warranty
- NIST Traceable Calibration Certificate
- Voltage Range: 0.10 to 4.4 kV
- Built in Single Phase Coupler
- AC Input: 230V/50Hz
Used Haefely PEFT 4010 EFT/Burst Simulator for IEC/EN 61000-4-4
Typically In Stock- 100 Day Warranty
- Fresh Traceable Calibration Certificate with Data
- Order online now
- Voltage Range: 0.10 to 4.5 kV
- Built in Single Phase Coupler
Used Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler
In Stock- Suitable for pre-compliance to IEC 61000-4-4
- Built-in 3 Phase / 30 Amp Coupler
- Easily Programmable
- 100 Day Warranty
- Fresh NIST calibration
Used Thermo Fisher Keytek ECAT Surge & Burst/EFT Simulator System
In Stock- Rent the Keytek ECAT System
- System Configuration:
- E103 Controller (fiber-interface for remote control)
- E411 EFT/Noise Burst Simulator to 4.4 kV (IEC 61000-4-4)
- E501B Surge Simulator to 6.6 kV (IEC 61000-4-5, ANSI C62.41 Cat. B and UL 1449 at 3kA)
- E4551A Single Phase Surge/EFT Coupler 250V rms (typ. 15 Amps)
- Input voltage: 100V to 240VAC
- Input Current: 3.5A at 100 V; 1.5A at 240 V
Used EM Test CA EFT Kit Calibration Set for EFT/Burst Generators (50 Ohm & 1 kOhm Load Resistors)
In Stock- Used Cal Kit comes with 6 month warranty
- Verification/calibration kit for IEC/EN 61000-4-4 and ISO 7637
- Max input voltage: 8kV
- 50 Ohm & 1 kOhm Load Resistors
- Compatible with all burst/EFT generators
Showing 1 - 9 of 9 items