Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Impedance Stabilization Networks (Power and Data Lines)
Impedance Stabilization Networks (Power and Data Lines)
Impedance Stabilization Networks also known as Artificial Mains Networks are the most common transducer to perform conducted emission testing. For testing electrical power lines a Line Impedance Stabilization Network (LISN) is required. To test data lines an Impedance StabilizatioN Network (ISN) is used.
Impedance Stabilization Networks (Power and Data Lines) There are 64 products.
California Instruments OMNI 1-18i Impedance Matching Network
In Stock- Impedance matching network for single phase 5001i/iX to support IEC-1000-3-3 flicker tests
- AC Source Line Impedance Network
- Meets IEC 1000-3-3 Flicker test specification requirements
- Single and Three Phase Models
- Bypass Mode
- Remote Control Interface
Com-Power ISN-T8 Impedance Stabilization Network 150 kHz to 30 MHz
Typically In Stock- Rent the Com-Power ISN T8 here.
- Frequency Range: 150 kHz to 30 MHz
- For Unshielded Telecomunication Lines 1 to 4 balanced pairs
- Complies with CISPR 16-1-2, CISPR 22/32
- Individual Calibration Included
LISN-CISPR25 Single Path Automotive Line Impedance Stabilization Network
- Current Handling: 200 Amps (Custom Models Available up to 1,000 Amps)
- Inductance: 5 μH
- Frequency Range: 100 kHz - 108 MHz
- Termination: Threaded Stud (TS)
- RF Connector: N-Type
- Typical Configuration in Stock: LISN-CISPR25-200A-TS-N
- 4 Year Warranty
$2,399.00In StockCom-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
In Stock- 150 kHz to 30 MHz Frequency Range
- 32 Amps Current Rating
- Fully Compliant with CISPR 16-1-2/ANSI C63.4
- Remote Switching of Line Under Test
- Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
- Three-Year Warranty
To Rent Com-Power LI-3P-132
Com-Power LI-3P-1100 150 kHz - 30 MHz Three-Phase Line Impedance Stabilization Network
In Stock- 150kHz - 30 MHz Frequency Range
- 100 Amps Current Rating
- Fully Compliant with CISPR 16-1-2/ANSI C63.4
- internal cooling fan
- Remote Switching of Line Under Test
- Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
- Three-Year Warranty
Com-Power LI-3P-116 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
In Stock- 150 kHz to 30 MHz Frequency Range
- 16 Amps Current Rating
- Fully Compliant with CISPR 16-1-2/ANSI C63.4
- Remote Switching of Line Under Test
- Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
- Three-Year Warranty
Com-Power LI-3P-163 150kHz - 30MHz Three-Phase Line Impedance Stabilization Network
In Stock- 150 kHz to 30 MHz Frequency Range
- 63 Amps Current Rating
- Fully Compliant with CISPR 16-1-2/ANSI C63.4
- internal cooling fan
- Remote Switching of Line Under Test
- Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
- Three-Year Warranty
EMCO 3825/2 LISN 9kHz - 100 MHz for CISPR / 1PH
Typically In Stock- Line Impedance Stabilization Network ( LISN )
- Network Iductance Impedance: 50/250 µH, 50 ohms
- Frequency Range: 9 kHz to 100 MHz
- Maximum Current: 25 A
- Maximum Vultage: 400 VAC Line - Line; 220 VAC Line to Ground
- Lines Plus Ground: 2
- Power Source Frequency: DC - 60 Hz
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4
- 9 kHz to 30 MHz Frequency Range
- Fully Compliant with CISPR 16-1-2/ANSI C63.4
- Dual-Conductor Network with Universal
- Power Receptacle to accept any EUT Plug
- 20 Amps Current Handling Capability
$400.00Typically In StockLISN-CISPR16-100 3-Phase, 100 Amp Line Impedance Stabilization Network
- 9 kHz a 30 MHz Frequency Range
- 50μH/250μH Inductance
- 100 Amps Current Handling
- DC – 400V, 60Hz – 270VAC, 400Hz – 130VAC Voltage Handling
- 4-Year Warranty
- Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
$7,600.00In StockRent Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
In Stock- 150 kHz to 30 MHz Frequency Range
- 32 Amps Current Rating
- Fully Compliant with CISPR 16-1-2/ANSI C63.4
- Remote Switching of Line Under Test
- Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
- Three-Year Warranty
To Purchase Com-Power LI-3P-132
Com-Power ISN-T8 Impendace Stabilization Network and Calibration Kit
Typically In Stock- Rent the Com-Power ISN T8 here.
- Frequency Range: 150 kHz to 30 MHz
- For Unshielded Telecomunication Lines 1 to 4 balanced pairs
- Complies with CISPR 16-1-2, CISPR 22/32
- Individual Calibration Included
