EM Absorbing Clamps

The EMC Shop specializes in measuring power disturbances in accordance to CISPR and EN compliance test standards. Rent, buy or lease EM Absorbing Clamps. 

EM Absorbing Clamps

CISPR 14 (EN 55014)

CISPR 16-1-4

CISPR 16-2-3

CISPR 11

CISPR 16-2-2/EN 55016-2-2

CISPR 13/EN 55013

CISPR 14-1/EN 55014-1

EN 50083-2

EM Absorbing Clamps There are 13 products.

per page
Showing 1 - 12 of 13 items
  • Request Quote/More Info
    • Frequency range 1 MHz to 1 GHz
    • Max. cable diameter 10 mm
    • Cable termination for radiated emission and immunity tests
    • Ideal for testing in GTEM cells
    Request Quote/More Info
    • Frequency range 1 MHz to 1 GHz
    • Frequency range 30 MHz to 200 MHz (CISPR 16-1-4)
    • Max. cable diameter 20 mm
    • Conform with CISPR 16-1-4, CISPR 16-2-3, CISPR 11
    Request Quote/More Info
    • High decoupling
    • Suitable to KEMZ 801
    • Simple insertion in the test setup
    • As specified in IEC/EN 61000-4-6
    • Very efficient coupling
    • Can be used on almost any cable
    • Ruggedly designed
    $3,470.00
    Request Quote/More Info
    • 30 MHz - 1 GHz Frequency Range
    • RF Disturbance power measuring, according to CISPR 14 (EN 55014)
    • Aperture Diameter: 12.7 mm (0.5 inches)
    • Insetion Loss: 14 dB to 21 dB
    • Typically in stock with calibration and 3 Year warranty
    Request Quote/More Info
    • 30 MHz - 1 GHz Frequency Range
    • RF Disturbance power measuring, according to CISPR 14 (EN 55014)
    • Aperture Diameter: 34.9 mm (1.37 inches)
    • Insetion Loss: 14 dB to 21 dB
    • Typically in stock with calibration and 3 Year warranty
    Request Quote/More Info
    • As specified in CISPR 16-1-3/EN 55016-1-3
    • Disturbance power measuring, according to CISPR 16-2-2/EN 55016-2-2, CISPR 13/EN 55013, CISPR 14-1/EN 55014-1 and EN 50083-2
    • Excellent for using as diagnostic tool and for measurements of screening attenuation of coaxial cables
    • Supplied with 6 dB attenuator and RF cable
    Request Quote/More Info
    • As specified in CISPR 16-1-3
    • Disturbance power measuring, according to CISPR 16-2-2
    • Can be used as diagnostic tool
    • Measurement of screening attenuation of coaxial cables
    $4,250.00
    Request Quote/More Info
    • Excellent decoupling from 150 kHz
    • Conform with IEC 61000-4-6 ed. 4
    • Simple insertion in the test setup
    • Large diameter of 35 mm
    $1,850.00
    Request Quote/More Info
    • Correspond to CISPR 16-1-3
    • Measurement of interference power according to CISPR 16-2-2
    • Can be used as a diagnostic tool
    • Measuring the shielding efficiency of coaxial cables
    Request Quote/More Info
    • 30 MHz - 200 MHz Frequency Range
    • Calibration Fixture for CMAD 1614
    • With 4 mm diameter is part of the delivery
    • Calibration fixture was designed for measurements acc. to CISPR 16-1-4 sections 9.5 and 9.6
    Request Quote/More Info
    • 30 - 1000 MHz
    • EMI Absorbing Clamp
    • Acc. CISPR 16 for interference power
    • With silicon coated rolls
    Request Quote/More Info
Showing 1 - 12 of 13 items