Keysight (Agilent) EMI Analyzers

Rent, buy or lease Keysight (Agilent) EMI Analyzers. The EMC Shop specializes in radiated and conducted emissions testing for MIL 461, CISPR, DO-160 and more.

Keysight (Agilent) EMI Analyzers There are 8 products.

Showing 1 - 8 of 8 items
    • Protects the spectrum analyzer input from damage caused by high-level transients
    • Frequency Range: 9 kHz to 200 MHz
    • Insertion Loss: 10 dB
    • Maximum Input Level: Continuous: 2.5 W (+34 dBm), Pulse: 10 kW for 10 µS, DC:±12 V
    Request Quote/More Info
    • Rent the Keysight (Agilent) N9038A-526-B85-RT1
    • 3 dB resolution bandwidths
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • ±0.5 dB absolute amplitude accuracy
    • -166 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
    • EMC measurements offering simultaneous detectors, signal lists, scan tables, limit lines, and correction factors
    Request Quote/More Info
    • Full systems for EMI measurements available
    • Rentals ship in 1-2 Business Days
    • Frequency Range from 9 kHz - 1.5 GHz
    • Current Calibration Cerificate Included
    $995.00
    Request Quote/More Info
    • Rental Rate Per Month - 3 Month Minimum Required
    • Rentals ship immediately
    • 9 kHz - 3 GHz
    • Automatic EMI measurements
    • High accuray and response
    • Compatible with the BenchLink Web Remote software
    • Log sweep
    • 5 minute warm-up
    • Built-in preamplifier
    $950.00
    Request Quote/More Info
    • E7400A Series EMC Analyzer
    • Close Field Probe Set
    • Biconical Antenna
    • Log Periodic Antenna
    • Line Impedance Stabilization Network (LISN)
    • Amplifier
    • Transient Limiter with High-Pass Filter
    Request Quote/More Info
    • Rentals ship immediately
    • 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
    • Real-Time Analysis up to 85 MHz BW
    • Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
    • Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
    • Purchase a Used Keysight N9038 EMI Analyzer here.
    Request Quote/More Info
    • 100 kHz to 500 MHz / 1.5 GHz / 3 GHz / 4.5 GHz / 6.5 GHz / 8.5 GHz / 14 GHz / 18 GHz
    • Dynamic Range: 117 dB (spec), 122 dB (typical)
    • Output Power: 0 dBm
    • Trace Noise: 0.015 dBrms
    • 2-port, 50 ohm, S-parameter test set, Type-N connectors
    • Sweep Type: Linear and log frequency, Segment sweep
    • Noise Floor: -127 dBm
    • upgrade options at any time
    • Industry-standard ENA Series measurement framework
    • Support for 6 languages via softkey; embedded help manual in English/Simplified Chinese
    • USB Interface standard, GPIB and Handler I/O optional
    • Three-year warranty

    What's Included

    • E5063A ENA vector network analyzer
    • E5063A ENA vector network analyzer Installation guide
    • CD ROM IO libraries
    • Power cable
    • Certificate of calibration
    Request Quote/More Info
  • Quick view
    $14,012.50 $14,750.00 -5%
    • ISO 17025 Calibration from Keysight
    • 25 MHz Bandwidth
    • -170 dBm DANL at 1 GHz
    • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
    • Standard Attenuator Range; 60 dB (10 dB Steps)
    • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
    • Perform power measurements quickly at discrete frequency points with list-sweep mode
    • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more
    $14,012.50 $14,750.00 -5%
    Reduced price!
    Request Quote/More Info
Showing 1 - 8 of 8 items