Accessories

Quick Links

Information

Accessories

Accessories There are 29 products.

View:
Grid
List

Previous
1
2
3
Next

Showing 1 - 12 of 29 items

Quick view
Schloder SFT 415-1 Capacity Coupling Clamp with Protection Cover
- Diameter for cable: up to 40 mm
- HV connectors: on both sides (type: Fischer)
- Distance between coupling plate and ground plate: 10 cm
- Dimension: 100 cm x 14 cm x 14 cm (L*W*H)
- Insulation test voltage : 5 kV (1,2/50 µs)
- Coupling capacitance : typ. 100 pF – 1000 pF
- Weight : approx. 6 kg
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder SFT 415-1 Capacity Coupling Clamp with Protection Cover

Schloder SFT 415-1 Capacity Coupling Clamp with Protection Cover
Diameter for cable: up to 40 mm
HV connectors: on both sides (type: Fischer)
Distance between coupling plate and ground plate: 10 cm
Dimension: 100 cm x 14 cm x 14 cm (L*W*H)
Insulation test voltage : 5 kV (1,2/50 µs)
Coupling capacitance : typ. 100 pF – 1000 pF
Weight : approx. 6 kg
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing
- EM clamp for immunity testing of cables with up to 35 mm diameter
- High coupling factor: less than 15 watts amplifier output power is required to obtain a test level of 10 V
- Calibration unit and calibration data are supplied with each instrument
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing

EMIC-35 Current Injection Clamp for RF Conducted Immunity Testing
EM clamp for immunity testing of cables with up to 35 mm diameter
High coupling factor: less than 15 watts amplifier output power is required to obtain a test level of 10 V
Calibration unit and calibration data are supplied with each instrument
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test
- Rent the EMIC-20 EM Clamp
- EM clamp for immunity testing of cables with up to 20 mm diameter
- High coupling factor: less than 15 watts amplifier output power is required to obtain a test level of 10 V
- 10 kHz – 1000 MHz
- Calibration unit and calibration data are supplied with each instrument
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test

EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test
Rent the EMIC-20 EM Clamp
EM clamp for immunity testing of cables with up to 20 mm diameter
High coupling factor: less than 15 watts amplifier output power is required to obtain a test level of 10 V
10 kHz – 1000 MHz
Calibration unit and calibration data are supplied with each instrument
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder CAL 1250 50/60 Hz Magnetic Field Calibrator
- Generation of magnetic fields by 3-channel generator/amplifier combination for calibration purpose
- Complies to IEEE644
- Loop sensor for field verification is included
- Application Software WIN7 compatible
- Connection to computer via USB-port
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder CAL 1250 50/60 Hz Magnetic Field Calibrator

Schloder CAL 1250 50/60 Hz Magnetic Field Calibrator
Generation of magnetic fields by 3-channel generator/amplifier combination for calibration purpose
Complies to IEEE644
Loop sensor for field verification is included
Application Software WIN7 compatible
Connection to computer via USB-port
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder BCI-P 1 MHz – 400 MHz Bulk Current Injection Probe
- Meets specifications of ISO 11452-4:2005 and IEC 61000-4-6
- Frequency range from 1 MHz up to 400 MHz
- Designed for automotive BCI testing
- Low insertion loss
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder BCI-P 1 MHz – 400 MHz Bulk Current Injection Probe

Schloder BCI-P 1 MHz – 400 MHz Bulk Current Injection Probe
Meets specifications of ISO 11452-4:2005 and IEC 61000-4-6
Frequency range from 1 MHz up to 400 MHz
Designed for automotive BCI testing
Low insertion loss
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Rent Schloder CDN-EMCL-20 EM Injection Clamp for IEC 61000-4-6
- Rent a Turnkey IEC 61000-4-6 RF Conducted Test System with EM Clamp
- EM clamp for immunity testing of cables with up to 20 mm diameter
- High coupling factor: less than 15 watts amplifier output power is required to obtain a test level of 10 V
- 10 kHz – 1000 MHz
- Calibration unit and calibration data are supplied with each instrument
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Rent Schloder CDN-EMCL-20 EM Injection Clamp for IEC 61000-4-6

Rent Schloder CDN-EMCL-20 EM Injection Clamp for IEC 61000-4-6
Rent a Turnkey IEC 61000-4-6 RF Conducted Test System with EM Clamp
EM clamp for immunity testing of cables with up to 20 mm diameter
High coupling factor: less than 15 watts amplifier output power is required to obtain a test level of 10 V
10 kHz – 1000 MHz
Calibration unit and calibration data are supplied with each instrument
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder EMV-SOFT Remote Control Software
- Software for Operation EMC - Test Generators
- Controls the Schlöder Test Generators via One Interface Cable
- Includes the Interface Cable
- For BURST, SURGE, incl. 3 Phase Coupling Network and;
- The Voltage Interruption Simulator (VIS)
- Up to 16 Selectable COM Ports are available
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder EMV-SOFT Remote Control Software

Schloder EMV-SOFT Remote Control Software
Software for Operation EMC - Test Generators
Controls the Schlöder Test Generators via One Interface Cable
Includes the Interface Cable
For BURST, SURGE, incl. 3 Phase Coupling Network and;
The Voltage Interruption Simulator (VIS)
Up to 16 Selectable COM Ports are available
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder VIS 740 Step Transformer for Voltage Drops, IEC/EN 61000-4-11
- Voltage drop acc. IEC / EN 61000-4-11
- 230 Volt, 50 Hz
- 16 A Continuous
- 4 steps: 0 %, 40 %, 70 %, 80 %
- For use with Schloder VIS 1700 Voltage Interruption Simulator
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder VIS 740 Step Transformer for Voltage Drops, IEC/EN 61000-4-11

Schloder VIS 740 Step Transformer for Voltage Drops, IEC/EN 61000-4-11
Voltage drop acc. IEC / EN 61000-4-11
230 Volt, 50 Hz
16 A Continuous
4 steps: 0 %, 40 %, 70 %, 80 %
For use with Schloder VIS 1700 Voltage Interruption Simulator
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder MGA_B4 Current Transducer incl. Correction Network
- Audio in: 4mm MC Safety Jacks
- Input: XLR Female
- Output: XLR Male
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder MGA_B4 Current Transducer incl. Correction Network

Schloder MGA_B4 Current Transducer incl. Correction Network
Audio in: 4mm MC Safety Jacks
Input: XLR Female
Output: XLR Male
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder CDN D 100 Direct Injection Device
- 100 Ω Connector
- For RF Disturbances 10 kHz – 230 MHz
- With Alligator Clip
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder CDN D 100 Direct Injection Device

Schloder CDN D 100 Direct Injection Device
100 Ω Connector
For RF Disturbances 10 kHz – 230 MHz
With Alligator Clip
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder CDN CAN-BUS 150 kHz – 230 MHz Coupling / Decoupling
- 150 kHz – 230 MHz Coupling / Decoupling
- Bus Lines
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder CDN CAN-BUS 150 kHz – 230 MHz Coupling / Decoupling

Schloder CDN CAN-BUS 150 kHz – 230 MHz Coupling / Decoupling
150 kHz – 230 MHz Coupling / Decoupling
Bus Lines
First Name Last Name Email Phone Subject Message or
Add to Compare
Quick view
Schloder SFT 415 - CS Calibration Set for CCC
- For Capacitive Coupling Clamp Burst
- IEC 61000-4-4, 2012
- Transducer Plate with Connection Adapter
- Optionally 50 ohm Attenuator
Request Quote
More
In Stock
Request Quote/More Info
Send Enquiry For Schloder SFT 415 - CS Calibration Set for CCC

Schloder SFT 415 - CS Calibration Set for CCC
For Capacitive Coupling Clamp Burst
IEC 61000-4-4, 2012
Transducer Plate with Connection Adapter
Optionally 50 ohm Attenuator
First Name Last Name Email Phone Subject Message or
Add to Compare