Schwarzbeck Broadband Horn Antennas

Rent, buy or lease Schwarzbeck Broadband Horn Antennas. The EMC Shop specializes in RF immunity and compliance testing.

Schwarzbeck Broadband Horn Antennas There are 19 products.

per page
Showing 1 - 12 of 19 items
    • Open Boundary Quad-Ridged Horn Antenna
    • Dual polarized Broadband Horn Antenna
    • Frequency range: 0.7 - 10 GHz
    • Connector: SMA-female
    • Size: 235 x 200 x 235 mm
    • Weight: 0.84 Kg
    Request Quote/More Info
    • Dual Polarized Broad-Band Horn Antenna
    • 0.4 - 10 GHz
    • N-Female
    Request Quote/More Info
    • Dual Polarized Broad-Band Horn Antenna
    • (0.8) 1 - 8 (10.5) GHz
    • N-Female
    Request Quote/More Info
    • Filters for power supply lines are measured according to CISPR 17
    • Two wideband transformers are required to transform the;
    • Typical impedance of measurement devices from 50 Ω to 0.1 Ω or from 50 Ω to 100 Ω respectively
    • 0.1 Ω transformer (voltage division ratio 22:1) has to be connected to the 50 Ω generator
    • 100 Ω transformer (voltage division ratio 1.4:1) has to be connected to a 50 Ω receiver
    Request Quote/More Info
    • Filters for power supply lines are measured according to CISPR 17
    • Two wideband transformers are required to transform the;
    • Typical impedance of measurement devices from 50 Ω to 0.1 Ω or from 50 Ω to 100 Ω respectively
    • 0.1 Ω transformer (voltage division ratio 22:1) has to be connected to the 50 Ω generator
    • 100 Ω transformer (voltage division ratio 1.4:1) has to be connected to a 50 Ω receiver
    Request Quote/More Info
    • 9 kHz - 60 MHz Frequency Range
    • Balun unsymm. 50 Ohm to symm. 120 Ohm
    • Input impedance: 50 Ohm unsymmetrical
    • Input connector: BNC
    • Output impedance: 120 Ohm symmetrical
    • Output connectors: RJ45 Pin 4+5 and 4 mm banana female
    Request Quote/More Info
    • Balun for Transmission Measurements
    • Acc. to IEC61643-21
    • 50 Ohm N to 120 Ohm Screw Terminals
    • Can be used for transmission measurements according to IEC 61643-21
    Request Quote/More Info
    • 9 kHz - 60 MHz Frequency Range
    • Balun unsymm. 50 Ohm to symm. 100 Ohm
    • Input impedance: 50 Ohm unsymmetrical
    • Input connector: BNC
    • Output impedance: 100 Ohm symmetrical
    • Output connectors: RJ45 Pin 4+5 and 4 mm banana female

    Request Quote/More Info
    • DC - >20 MHz Frequency Range
    • Adapts a symmetrical signal to a coaxial line
    • Twisted pairs with an impedance of approx. 120 Ω are used to transmit the Profibus signals
    • Can be applied to use an existing triaxial wiring
    • Can be mounted to a DIN 50022 support rail with 35 mm base
    Request Quote/More Info
    • 4-8 GHz Frequency Range (nominal)
    • 3.7-9 GHz Frequency Range (useable)
    • Linear polarized standard gain horn antenna
    • With coaxial 7/16 connector
    • For highest power handling
    Request Quote/More Info
    • 1-2 GHz Frequency Range (nominal)
    • 0.9-2.2 GHz Frequency Range (useable)
    • Linear polarized standard gain horn antenna
    • With coaxial 7/16 connector for highest power handling
    • Designed to generate highest fieldstrength at 1 m distance
    Request Quote/More Info
    • 2-4 GHz Frequency Range (nominal)
    • 1.9-4.6 GHz Frequency Range (useable)
    • Linear polarized standard gain horn antenna
    • With coaxial 7/16 connector
    • For highest power handling
    • Designed to generate highest fieldstrength at 1 m distance

    Request Quote/More Info
Showing 1 - 12 of 19 items