Schwarzbeck Automotive LISN

Rent, buy or lease Schwarzbeck Automotive LISN's. The EMC Shop specializes in CISPR 25, ISO 11452 and other automotive EMC testing.

Schwarzbeck Automotive LISN There are 11 products.

Showing 1 - 11 of 11 items
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max. 70 (100) A
    • With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote/More Info
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max.200 A
    • With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote/More Info
    • Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
    • Impedance (5µH + 1 Ohm) || 50 Ohm
    • Max. 400 A. With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path
    • BNC female connector

    Option N connector:

    • N-female connector instead of BNC
    Request Quote/More Info
    • LISN 5 µH || 50 Ohm
    • 70 (100) single path
    • Suitable for 600V DC and 270 V AC 890 Hz
    • Calibrated up to 400 MHz according to DO-160
    Request Quote/More Info
    • High Voltage LISN according to to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
    • Can be used for BCI with an external dummy load
    • Impedance (5µH) || 50 Ohm
    • 70 (100) A
    • 1000 V (DC)
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8600!
    Request Quote/More Info
    • High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
    • Can be used for BCI with an external dummy load.
    • Impedance (5µH) || 50 Ohm
    • 200 A
    • 1000 V DC
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8600!
    Request Quote/More Info
    • High Voltage LISN according to to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load.
    • Impedance (5µH) || 50 Ohm
    • 400 A
    • 1000 V (DC)
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8600!
    Request Quote/More Info
    • High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
    • To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
    • Can be used for BCI with an external dummy load.
    • Impedance (5µH) || 50 Ohm
    • 800 A
    • 1000 V (DC)
    • Backside with built in 0.1 microfarad capacitor to ground
    • N-jack
    • Normally used in pairs inside the enclosure HVSE 8601!
    Request Quote/More Info
    • 2 A - 8 A
    • BAN broadband artificial network
    • Acc. ISO 11452-7 or DC-10614
    Request Quote/More Info
    • DC-Blocking Capacitor
    • Measurement equipment for RF often provides an impedance of 50 Ω and does not provide galvanic isolation.
    • To prevent damage to the measurement equipment an isolating capacitor is needed.
    Request Quote/More Info
    • 8 A - 30 A
    • BAN Broadband Artificial Network
    • Acc. ISO 11452-7 or DC-10614
    Request Quote/More Info
Showing 1 - 11 of 11 items