Schwarzbeck ISN T-Networks

Rent, buy or lease Schwarzbeck ISN T-Networks. The EMC Shop specializes in RF immunity and compliance testing

Schwarzbeck ISN T-Networks There are 8 products.

Showing 1 - 8 of 8 items
    • 9 kHz - 30 MHz
    • T-ISN 150 Ohm Asymmetric
    • BNC Jack 50 Ohm Unsymmetric
    • 2-Wire
    • 400 V
    • 3 A AC
    • CISPR 22 D1/EN55015-2002
    Request Quote/More Info
    • DC ... 30 MHz Frequency Range
    • 6 dB ±0.2 dB Insertion loss
    • It is part of the measurement setup according to EN 50561-1:2012
    • Is a resistive, unsymmetrical two way splitter with an impedance of 50 Ω
    Request Quote/More Info
    • 1.6 MHz - 30 MHz Frequency Range
    • For measurements at powerline transmission devices
    • Combined with two line impedance stabilization networks (LISN)
    • Provides a coupling system which guarantees defined conditions for the measurement
    Request Quote/More Info
    • 150 kHz – 230 MHz Frequency Range
    • ISN acc. CISPR 22 Ed.5.5:2006, Annex D, D9 for coaxial lines
    • Can be used to measure the conducted voltage emissions of telecommunication and data processing equipment
    • It is designed to measure coaxial line. It is based on IEC/CISPR 22 and the related national standards
    • Provide sufficient decoupling from the equipment under test (EuT) to the auxiliary equipment (AE)
    Request Quote/More Info
    • 150 kHz – 230 MHz Frequency Range
    • ISN acc. CISPR 22 Ed.5.5:2006, Annex D, D9 for coaxial lines
    • Can be used to measure the conducted voltage emissions of telecommunication and data processing equipment
    • It is designed to measure coaxial line. It is based on IEC/CISPR 22 and the related national standards
    • Provide sufficient decoupling from the equipment under test (EuT) to the auxiliary equipment (AE)
    Request Quote/More Info
    • 150 kHz – 30 MHz Frequency range (ISN)
    • 150 kHz – 80 MHz Frequency range (CDN)
    • ISN T8 CAT6 (LCL = 75 dB) acc. CISPR 22 edition 5.2
    • Figure D.3. for up to 4 pairs UTP.
    Request Quote/More Info
    • ISN T8 CAT5 (LCL = 65 dB) acc. CISPR 22 edition 5.2, figure D.3.
    • For up to 4 Pairs UTP
    • Allows to perform common mode disturbance voltage measurements
    • Provides an longitudinal conversion loss of typically 65 dB at the EuT port
    • Allows to measure CAT5 devices
    Request Quote/More Info
    • DC ... 30 MHz Frequency Range
    • Is a resistive, symmetrical two port splitter
    • With an impedance of 100 Ω
    • It is part of the measurement setup according to EN 50561-1
    Request Quote/More Info
Showing 1 - 8 of 8 items