Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Other Discounted Equipment
Other Discounted Equipment
New and used discounted test equipment and accessories for product compliance discounted for immediate sale. Standard warranties typically 90 days, extended warranties available at The EMC Shop.
Other Discounted Equipment There are 29 products.
Agilent 4395A 10Hz to 500MHz Network / Spectrum / Impedance Analyzer
In Stock- Full-vector network and spectrum measurement and analysis
- Wide dynamic range network measurement with fast sweep speeds
- +/-0.05 dB /+/-0.3deg dynamic magnitude/phase accuracy
- Extremely fast narrowband spectrum measurement
- Impedance analysis option and test kit available
- -145 dBm/Hz sensitivity for spectrum analysis
- Built-in IBASIC for easy test automation
- Time-gated spectrum analysis option
- Color TFT display and built-in disk drive/RAM disk
Narda EF 5092 50 GHz Electric field Probe for NBM Meter
In Stock- Measurement Range: 18 - 1090 V/m
- Dynmaic Range: 37 dB
- Flatness: ±1.25 dB
- Isotropic Response: ±1 dB
- Ideal for Satellite Communication, Leak Detection and Exposure Levels (Partially suitable for Radar Signals)
Bertan 230-20R High Voltage Power Supply 0-20kV
In Stock- Bench Top Design
- Low Ripple Noise
- 3.5 Digital Metering Panel
- Reversible Output Polarity
Keysight / Agilent E9304A RF Power Sensor, 9 kHz - 6 GHz
In Stock- Low frequency coverage (9 kHz to 6 GHz) for EMC/EMI test applications such as the radiated immunity test (IEC61000-4-3)
- High sensitivity (-60 to +20 dBm) and fast measurement speed to reduce the time taken to calibrate radiated field uniformity and EMC/EMI test receivers
- Measure transmitter power and receiver sensitivity at Very Low Frequency (VLF) to microwave frequencies
- Special option available to 18 GHz
- Precision type-N connector as standard
- Operates with the EPM-P (E4416A/ 17A) series and P-Series (N1911A/ 12A) power meters
Boonton 52012 Power Sensor 10 MHz - 12.4 GHz
In Stock- Lightweight and easy to use
- Convenient for production test and field service
- Replacement solution for conventional power meter and sensor combination
- Simple usb connection to laptop or PC
- Use multiple sensors on one laptop or PC
- Robust construction with good reliability
- No reference calibrator required
Tektronix TDS3052C Oscilloscope 500 MHz
In Stock- 500 MHz bandwidth
- 2 analog channel models
- Sample rates up to 5 GS/s real time on all channels
- 10k record length on all channels
- 3,600 wfms/s continuous waveform capture rate
- Suite of advanced triggers
Rohde & Schwarz NRP-ZKU.03 Power Sensor Cable
Call for Availability- 6 pole interface cable
- 3.0 meter length
- Connects with R&S NRPxxS/T/A/SN/TN/AN power sensors to the R&S NRP2 base unit
- Connectors:M12(sensor side) - ODU 6-pole (accessory)
Sorensen SGA160/63 Programmable Precision High Power DC Power Supply
In Stock- High Power Density: up to 15 kW in 3U, 30 kW in a 6U chassis
- Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kW
- Fast Load Transient Response: Protection from undesired voltage excursions
- Low Ripple and Noise
- Hardware Trigger (Ethernet Option)
- Parallelable up to 150 kW
- Sequencing: Free system controller & speed up test
- Low audible noise: Temperature controlled variable speed fans
Boonton 4232A 2 Channel RF Power Meter
- 10 kHz to 100 GHz Measurement Range
- >200 Measurements per second
- Single or Dual-Channel Display
- 90-dB Dynamic Range, Depending on Sensor
- -70 dBm to +44 dBm, Depending on Sesor
- HP437. HP438, and Boontoon 4220A Emulation
- Automatically Loads Sensor Data
- Simple Software Control
- IEEE-488 Interface Standard, RS-232 Optional
$1,900.00In StockKeysight U2004A Average Power Sensor 9 kHz to 6 GHz USB
In Stock- Frequency range of 9 kHz to 6 GHz
- Wide dynamic range of -60 to +20 dBm
- Internal zeroing capability to eliminate external calibration
- High measurement speed of up to 250readings/second
- Support internal/external trigger measurements, internal triggering and trace display
- Display power measurements on a PC or other Keysight’s instrument
Boonton 51075 500kHz-18GHz CW Power Sensor
- 500kHz-18GHz CW Power Sensor
- Fast measurement speed
- Wide dynamic range (-70 dBm to +20 dBm)
- Refurbished unit includes:
- Power Sensor Cable
- Calibration Certificate
- User Manual
- 100 Day Warranty
- 10% off Calibration Service for Life
- Excellent SWR for reducing mismatch uncertainty
- Compatible with the most of Boonton RF power meter series
$975.00Typically In StockTeseq PMU 6003 USB Power Meter/Sensor 9 kHz - 3 GHz
In Stock- Frequency range 9 kHz to 3 GHz
- Linear measurement range -45 to +20 dBm
- RMS power using log detector
- Low voltage detection
- For direct connection to USB
- Metal casing, ruggedly designed
