Used LISNs Test Equipment, Systems & Solutions
-
PMM L2-16B Two-line Single Phase V-Network
SKU: 6763
Frequency Range: 9 kHz to 30 MHzStandards Met: CISPR 16-1-2 FCC Part 15Continuous Rated Output Current: 16 AmpsMaximum Permissible Operating Voltage: 250 VAC; 350 VDCEquivalent Circuit: 50 Ω // (5 Ω+ 50 μH)RF Output Connector: BNC femaleEUT connection: SCHUKO connectorApplications: Conducted Emissions, BCI Testing , Automotive EV EMC$175.00 - $295.00In Stock -
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps
SKU: 11287
Application/Test Type: Power line conducted emissions testsCurrent Rating: 10 AmpsDimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cmFrequency Range: 9 kHz to 30 MHzInductors: 50 µH/250µHMains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)RF Connector: 50Ω BNC MonitorStandards Met: FCC Part 15, VDE 0871, VDE 0875Voltage Rating: 250 VAC (Line to Ground)$195.00 - $1,975.00In Stock -
Schwarzbeck NNBL 8226 MIL-STD-461 LISN
SKU: 6862
Frequency Range: 9 kHz - 100 MHzMax. cont. current: 70 AMax. current (limited time): 100 AMax Voltage (DC): 500 VMax. Voltage (AC 50/60 Hz): 250 VMax. Voltage (AC 400 Hz): 140 VImpedance: (50μH + 5 Ω) || 50 Ω (+/- 20 %)DC-Resitance mains-EuT: ca. 10 mΩEUT Connectors: Wing terminalsTest Standards: MIL-STD-461$2,775.00Typically in Stock -
Solar 9233-50-TS-50-N EMI LISN for MIL-STD-461
SKU: SO-9233-TS
Test Standards: MIL-STD-461Applications: Military EMC Testing, Conducted Emissions TestingMax Current: 50 AmpsFrequency Range: 10 kHz – 50 MHzCoupling Capacitor: 0.25 µFRF Connector: N-Type(f)Inductance: 50 µHTypically In Stock -
Com-Power ISN-T8 Impedance Stabilization Network and Calibration Kit
SKU: 30149
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dBMains & EUT Connections: D-sub 25 pin female connectorsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2, CISPR 22Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)Typically in Stock -
Solar 8616-5-TS-200-N 5uH EMI LISN
SKU: SOLA-8616-5-TS-200-N
Test Standards: MIL-STD-462, DO-160, FCC Part 18Applications: Military EMC Testing, Conducted Emissions TestingMax Current: 100 AmpsFrequency Range: 10 kHz – 30 MHzCoupling Capacitor: 0.25 µFRF Connector: N-Type(f)Inductance: 5 µHVideos: Debugging FailuresTypically In Stock -
Com-Power LI-550A Line Impedance Stabilization Network (LISN)
SKU: 10114
Weight: 14 lbs. / 6.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Amps (AC), 35 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 100 kHz to 108 MHzInductors: 5 µH (air-core)Insertion Loss: 1.5 dB (150 kHz to 30 MHz)Isolation: 20 - 40 dB (100 kHz to 3 MHz) 40 dB ( 3 MHz to 30 MHz)Mains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: CISPR 25 / CISPR 16-1-2Voltage Rating: 270 VAC (Line to Ground), 380 VDC$175.00 - $1,975.001 Set -
Fischer FCC-TLISN-T4-02 CISPR 22 Impedance Stabilization Network (ISN)
SKU: 484
Application/Test Type: Measuring conducted emissions on two balanced pair telecom ITE’s.Common Mode Impedance: 150 ± 20ΩCurrent Rating: 250 mA MaximumDecoupling of Common Mode Disturbance: 35 dB min. to 150 kHz; 55 dB min up to 30 MHzFrequency Range: 150 kHz to 30 MHzMains & EUT Connections: D-sub 25 femaleRF Connector: 50Ω BNC femaleVoltage Division Factor: 9.5 dB ±1 dBVoltage Rating: 63 VAC RMS, 100 VDCTest Standards: CISPR 22 (ISNs)$395.00 - $2,750.00In Stock -
Teseq ISN T2A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: sku-158
Frequency Range: 150 kHz to 80 MHzRF Input Voltage: 15 VWas:$2,130.00$1,597.50 -
Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: sku-159
Frequency Range: 150 kHz to 80 MHzRF Input Voltage: 15 V