Discounted EMI Analyzers

New and used Discounted EMI Analyzers for conducted and radiated emissions testing discounted for immediate sale. Standard warranties typically 90 days, extended warranties available at The EMC Shop.

Discounted EMI Analyzers There are 13 products.

per page
Showing 1 - 12 of 13 items
    • Spectrum Analyzer Frequency: 9kHz - 1.5 GHz
    • Vector Network Analyzer Frequency: 10 MHz - 1.5 GHz
    • Resolution Bandwidth: 1 Hz - 1 MHz
    • Displayed Average Noise Level: -156 dBm/Hz
    In Stock
    Request Quote/More Info
  • • Multiple Source Control and Frequency Offset

    • E/O and O/E Application

    • Rear Panel IF Inputs (for upgrade to Millimeter Wave)

    • NxN calibration Utility for Mixer Measurements

    • Embed/De-Embed application

    • High Stability Frequency Reference

    • 20 GHz Frequency

    In Stock
    Request Quote/More Info
    • 200 MHz up to 20 GHz
    • Excellent sensitivity (with preamplifier) of < –161 dBm (1 Hz)
    • All-in-one analyzer: spectrum analyzer, network analyzer and CAT
    • Internal tracking generator, VSWR bridge, bias tee
    • Rugged, splash-proof housing for use in the field
    In Stock
    Request Quote/More Info
    • Fast digital resolution bandwidths of 1 Hz to 3 MHz
    • Portable, MIL-PRF-28800, Class 3 rugged
    • Easily transfer screen image or trace data to PC with BenchLink software E4444A BenchLink software
    In Stock
    Request Quote/More Info
    • High measurement speed and time-saving routines improve throughput
    • Remote control via LAN or IEC/IEEE bus in line with SCPI
    • Excellent price/performance ratio
    • General-purpose signal analysis
    • Wide range of personalities for various wireless/cellular digital standards
    In Stock
    Request Quote/More Info
    • 9 kHz - 3 GHz
    • Automatic EMI measurements
    • High accuracy and response
    • Compatible with the BenchLink Web Remote software
    • Log sweep
    • 5 minute warm-up
    • Built-in preamplifier
    Typically In Stock
    Request Quote/More Info
    • 100kHz to 1GHz Frequency Range
    • Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
    • Minimum resolution bandwidth (RBW) 100Hz
    • Phase noise <-80dBc/Hz @10kHz offset
    • Level measurement uncertainty <1.5dB
    • 8" (800 x 480) high-definition display
    • Linear and logarithmic frequency axis
    • Connectivity: LAN(LXI), USB Host & Device
    • PictBridge support
    • Compact size and light weight
    • Supplied with... USB cable, UK & European mains leads, quick guide,
    • Optional PC software... Ultra Spectrum, S1210 EMI Pre-Compliance Test
    • Other options include... EMI filter & quasi-peak detector, advanced measurement functions, 2FSK measurement & analysis in signal seamless capture mode, USB to GPIB module, rack mount kit, soft carry bag, RF transmitter demo kit, RF receiver demo kit, high power attenuator, RCL standard calibration

    To Purchase Rigol DSA710

    In Stock
    Request Quote/More Info
    • 100kHz to 1GHz Frequency Range
    • Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
    • Minimum resolution bandwidth (RBW) 100Hz
    • Phase noise <-80dBc/Hz @10kHz offset
    • Level measurement uncertainty <1.5dB
    • 8" (800 x 480) high-definition display
    • Linear and logarithmic frequency axis
    • Connectivity: LAN(LXI), USB Host & Device
    • PictBridge support
    • Compact size and light weight
    • Supplied with... USB cable, UK & European mains leads, quick guide,
    • Optional PC software... Ultra Spectrum, S1210 EMI Pre-Compliance Test
    • Other options include... EMI filter & quasi-peak detector, advanced measurement functions, 2FSK measurement & analysis in signal seamless capture mode, USB to GPIB module, rack mount kit, soft carry bag, RF transmitter demo kit, RF receiver demo kit, high power attenuator, RCL standard calibration

    To Rent Rigol DSA710

    In Stock
    Request Quote/More Info
    • Siglent Specs:
    • Frequency range: 9 KHz~3.2 GHz
    • Resolution bandwidth (RBW): 1 Hz~1 MHz, in 1-3-10 sequence
    • Phase noise: Total Amplitude Accuracy: ± 0.7 dB
    • Display average noise level (DANL): -161 dBm/Hz (Normalized to 1 Hz (typ.))
    • Tracking Generator
    • EMI-SSA3000X – EMI Measurement Kit
    $4,500.00
    In Stock
    Request Quote/More Info
    • Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
    • Resolution bandwidth settings down to 1 Hz
    • 10.1" WXGA (1366 x 768 pixel) display
    • Wi-Fi-enabled w/ remote control (included)
    • Easy virtual control w/ iOS/Android/PC
    • Low noise floor / High max. input power
    • Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
    • Three-year warranty
    Typically In Stock
    Request Quote/More Info
    • Rentals Ship Same Day
    • Built to CISPR 16-1-1 and CISPR 16-1-2 Standards
    • 140 dBµV (2 W) maximum input level without damage
    • 9 kHz – 3 GHz Frequency range, single input (extendable to 9 KHz and 3 GHz)
    • Built in LISN
    • Direct analog to digital conversion up to 30 MHz
    • CISPR Detectors:  Peak, Quasi-Peak, Average, RMS, C-Average, RMS-Average (option) Time-saving Smart Detector function analyzing critical frequencies only
    In Stock
    Request Quote/More Info
  • Quick view
    $14,012.50 $14,750.00 -5% Used
    • ISO 17025 Calibration from Keysight
    • 25 MHz Bandwidth
    • -170 dBm DANL at 1 GHz
    • Max Dynamic Range 3rd order @ 1 GHz: 112 dB
    • Standard Attenuator Range; 60 dB (10 dB Steps)
    • Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
    • Perform power measurements quickly at discrete frequency points with list-sweep mode
    • Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more
    $14,012.50 $14,750.00 -5%
    Reduced price!
    1 Unit
    Request Quote/More Info
Showing 1 - 12 of 13 items