Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
6 GHz RF Broadband Preamplifiers
6 GHz RF Broadband Preamplifiers
Clean up the signal going into your spectrum analyzer, EMC receiver or other meter by using a preamplifier and identify the troublespots that may be buried in the noise. Rent, buy, or lease various RF Broadband Preamplifiers rated to 6 GHz. The EMC Shop specializes in signal integrity and radiated emissions testing.
6 GHz RF Broadband Preamplifiers There are 10 products.
Showing 1 - 10 of 10 items
PA2500M Low Noise Amplifier, 1 - 2500 MHz
- Frequency Range of 1 MHz to 2500 MHz
- Low Noise Figure: 4.0 dB
- High Gain: 30 dB minimum, 31.5 dB Typical
- Low VSWR: 2:1 Typical
- Maximum Power A 1 dB: + 6 dBm
- Flatness: +/- 0.7 dB
- Individually Calibrated (gain calibration included)
$1,195.00Typically In StockAH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB
Typically In Stock- Frequency Range of 20 MHz to 4 GHz
- Low Noise Figure: 5.0 dB
- High Gain: 24 dB typical
- Low VSWR: 2.2:1 Input; 1.8:1 Output
- Output Power: + 3 dBm @ 1 dB compression
- Flatness: +/- 4.2 dB
- Individually Calibrated (gain calibration included)
AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz
Typically In Stock- Frequency Range of 20 MHz to 7 GHz
- Low Noise Figure: 5.0 dB
- High Gain: 30 dB typical
- Low VSWR: 2.2:1 Input; 1.8:1 Output
- Output Power: + 3 dBm @ 1 dB compression
- Flatness: +/- 4.2 dB
- Individually Calibrated (gain calibration included)
Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz
In Stock- Frequency range: 1 MHz to 3 GHz (nominal range);200 kHz to 4 GHz (utilizable range)
- Gain: typ. 12.5 dB
- Gain flatness: ±0.3 dB (1 MHz to 1 GHz); +0.3 / -2.5 dB (200 kHz to 3 GHz)
- RF-Input: N - female, 50 Ω
- RF-Output: N - male, 50 Ω
- VSWR (input): ≤1.5
- Noise figure: typ. 4 dB
- 1 dB-compression (output): >+12.5 dBm (119.5 dBμV)
Schwarzbeck BBV 9744 Broadband Preamplifier
In Stock- 9 kHz – 6 GHz Nominal Frequency Range
- 2.5 dB (1.0 GHz) Noise figure
- General purpose broadband preamplifier
- With high gain and low internal noise
- Very useful for the measurement of very low limits
Schwarzbeck BBV 9743 B Broadband Preamplifier
In Stock- 10 MHz – 6 GHz Nominal Frequency Range
- Typ. < 2.7dB (1.0 GHz) Noise figure
- General purpose broadband preamplifier
- With high gain and low internal noise
- Very useful for the measurement of very low limits
Schwarzbeck BBV 9743 Broadband Preamplifier 10 MHz - 6 GHz
In Stock- 10 MHz – 6 GHz Nominal Frequency Range
- 2.5 dB (1.0 GHz) Noise figure
- Aluminium enclosure
- N-Type flange connectors
- Very useful for the measurement of very low limits s, as required for CISPR 25
AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz
Typically In Stock- Frequency Range of 20 MHz to 2000 MHz
- Low Noise Figure: 4.0 dB
- High Gain: 30.4 dB typical
- Low VSWR: 1.5:1 Input; 1.8:1 Output
- Maximum Power A 1 dB: + 6 dBm
- Flatness: +/- 0.7 dB
- Individually Calibrated (gain calibration included)
Com-Power PAM-6000 High Gain EMC Preamplifier, 1 - 6 GHz
Typically In Stock- Broadband Frequency Range of 1 GHz - 6 GHz
- Low Noise Figure: 4 dB typical
- High Gain: 30 dB
- Low VSWR: 2:1 Input/1.8:1 Output
- Output Power: +13 dBm @ 1 dB compression
- Flatness: ± 1.5 dB
- Reverse Isolation: Greater than 30 dB
- Impedance: 50 Ohms
- Connector: N-type (f)
Sonoma 330 Broadband RF Amplifier, 10 kHz to 2.5 GHz, 20 dB Gain
Typically In Stock- Frequency range 10 kHz to 2.5 GHz
- 20 dB gain ±1.5 dB
- Noise figure (7.3 dB typ.)
- Input damage level: +13 dBm
- 50 Ohm impedance
- N(f) connectors, input/output 330N or BNC(f) connectors, input/output 330B
- 100, 120/220, 240 Vac; 50 to 60 Hz operation; 10 VA
Showing 1 - 10 of 10 items