The limits shown in tables 10 and 11 are listed in dB(mV/m), and thus theoretically any antenna can be used, provided that it has adequate sensitivity, the antenna correction factor is applied, and the antenna provides a 50 W match to the measuring receiver. For the purposes of this standard, the limits shown in tables 10 and 11 are based upon the following antennas:
Commercially available antennas with known antenna correction factors (see 3.4) may be used.
The cable loss factor can be determined in accordance with CISPR 12, annex A.
Rent, buy or lease antenna systems for CISPR 25 radiated emissions measurements. The EMC Shop specializes in automotive compliance test equipment and solutions.