Impedance Stabilization Network (ISN)

Rent, buy or lease CISPR 22 Impedance Stabilization Networks (ISN). The EMC Shop stocks calibrated test equipment for ITE compliance to radio disturbances.

Impedance Stabilization Network (ISN) There are 9 products.

View:
Grid
List

Showing 1 - 9 of 9 items

Quick view
$4,500.00
Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
- For use with one, two, three, or four unscreened balanced pairs
- Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
- Intended for connection to cable category 3 and 5
- 1000BaseT and PoE application
- Changeable pin-arrangements with RJ11 and RJ45
Rent Teseq ISN T8
$4,500.00

Add to cart More
Request Quote/More Info
Send Enquiry For Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

For use with one, two, three, or four unscreened balanced pairs

Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3

Intended for connection to cable category 3 and 5

1000BaseT and PoE application

Changeable pin-arrangements with RJ11 and RJ45

Rent Teseq ISN T8

Name Email Phone Subject Message or
Add to Compare
Quick view
$3,060.00
Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
- For use with one, two, three, or four unscreened balanced pairs
- Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
- Intended for connection to cable category 6
- 1000BaseT and PoE application
- Can be used as CDN for IEC/EN 61000-4-6 immunity tests
$3,060.00

Add to cart More
Request Quote/More Info
Send Enquiry For Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

For use with one, two, three, or four unscreened balanced pairs

Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3

Intended for connection to cable category 6

1000BaseT and PoE application

Can be used as CDN for IEC/EN 61000-4-6 immunity tests

Name Email Phone Subject Message or
Add to Compare
Quick view
Com-Power ISN-T2 Impendace Stabilization Network 150 kHz to 30 MHz
Frequency Range: 150 kHz to 30 MHz

For disturbance measurements on a single, unshielded, balanced pair

Provided with Cat. 3 & Cat. 5 LCL Adapters

Circuit concept per figure D.1 of EN 55022: 2010+AC:2011 (CISPR 22: 2008, Edition 6.0)

Meets applicable requirements of EN 55022: 2010+AC:2011 (CISPR 22: 2008, Edition 6.0) and CISPR 16-1-2: 2014, Edition 2.0
Request Quote
More
Request Quote/More Info
Send Enquiry For Com-Power ISN-T2 Impendace Stabilization Network 150 kHz to 30 MHz

Com-Power ISN-T2 Impendace Stabilization Network 150 kHz to 30 MHz

Frequency Range: 150 kHz to 30 MHz

For disturbance measurements on a single, unshielded, balanced pair

Provided with Cat. 3 & Cat. 5 LCL Adapters

Circuit concept per figure D.1 of EN 55022: 2010+AC:2011 (CISPR 22: 2008, Edition 6.0)

Meets applicable requirements of EN 55022: 2010+AC:2011 (CISPR 22: 2008, Edition 6.0) and CISPR 16-1-2: 2014, Edition 2.0

Name Email Phone Subject Message or
Add to Compare
Quick view
Com-Power ISN-T8 Impendace Stabilization Network 150 kHz to 30 MHz
Rent the Com-Power ISN T8 here.

Frequency Range: 150 kHz to 30 MHz

For Unshielded Telecomunication Lines 1 to 4 balanced pairs

Complies with CISPR 16-1-2, CISPR 22/32

Individual Calibration Included
Request Quote
More
Request Quote/More Info
Send Enquiry For Com-Power ISN-T8 Impendace Stabilization Network 150 kHz to 30 MHz

Com-Power ISN-T8 Impendace Stabilization Network 150 kHz to 30 MHz

Rent the Com-Power ISN T8 here.

Frequency Range: 150 kHz to 30 MHz

For Unshielded Telecomunication Lines 1 to 4 balanced pairs

Complies with CISPR 16-1-2, CISPR 22/32

Individual Calibration Included

Name Email Phone Subject Message or
Add to Compare
Quick view
Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
- For use with one, two, three, or four unscreened balanced pairs
- Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3
- Intended for connection to cable category 3 and 5
- 1000BaseT and PoE application
- Changeable pin-arrangements with RJ11 and RJ45
Purchase Teseq ISN T8
Request Quote
More
Request Quote/More Info
Send Enquiry For Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

For use with one, two, three, or four unscreened balanced pairs

Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3

Intended for connection to cable category 3 and 5

1000BaseT and PoE application

Changeable pin-arrangements with RJ11 and RJ45

Purchase Teseq ISN T8

Name Email Phone Subject Message or
Add to Compare
Quick view
Schwarzbeck CAT5 8158 8-Wire Impedance Stabilization Network
- ISN T8 CAT5 (LCL = 65 dB) acc. CISPR 22 edition 5.2, figure D.3.
- For up to 4 Pairs UTP
- Allows to perform common mode disturbance voltage measurements
- Provides an longitudinal conversion loss of typically 65 dB at the EuT port
- Allows to measure CAT5 devices
Request Quote
More
Request Quote/More Info
Send Enquiry For Schwarzbeck CAT5 8158 8-Wire Impedance Stabilization Network

Schwarzbeck CAT5 8158 8-Wire Impedance Stabilization Network

ISN T8 CAT5 (LCL = 65 dB) acc. CISPR 22 edition 5.2, figure D.3.

For up to 4 Pairs UTP

Allows to perform common mode disturbance voltage measurements

Provides an longitudinal conversion loss of typically 65 dB at the EuT port

Allows to measure CAT5 devices

Name Email Phone Subject Message or
Add to Compare
Quick view
$410.00
Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5
Purchase Com-Power ISN-T8 here

Frequency Range: 150 kHz to 30 MHz

For Unshielded Telecomunication Lines 1 to 4 balanced pairs

Complies with CISPR 16-1-2, CISPR 22/32

Individual Calibration Included
$410.00

Add to cart More
Request Quote/More Info
Send Enquiry For Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

Purchase Com-Power ISN-T8 here

Frequency Range: 150 kHz to 30 MHz

For Unshielded Telecomunication Lines 1 to 4 balanced pairs

Complies with CISPR 16-1-2, CISPR 22/32

Individual Calibration Included

Name Email Phone Subject Message or
Add to Compare
Quick view
Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
- For use with one or two unscreened balanced pairs
- Refers schematic circuit example in CISPR 22/32 Figure D.2/G.2
- Intended for connection to cable category 3 and 5
- Changeable pin-arrangements with RJ11 and RJ45
- Can be used as CDN for IEC/EN 61000-4-6 immunity tests
Request Quote
More
Request Quote/More Info
Send Enquiry For Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

For use with one or two unscreened balanced pairs

Refers schematic circuit example in CISPR 22/32 Figure D.2/G.2

Intended for connection to cable category 3 and 5

Changeable pin-arrangements with RJ11 and RJ45

Can be used as CDN for IEC/EN 61000-4-6 immunity tests

Name Email Phone Subject Message or
Add to Compare
Quick view
Teseq ISN T800S Impendace Stabilization Network per CISPR 22/32 Figure D.3/G.3
For use with one, two, three, or four unscreened balanced pairs

Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3

Intended for connection to cable category 3 and 5

1000BaseT and PoE application

Changeable pin-arrangements with RJ11 and RJ45
Request Quote
More
Request Quote/More Info
Send Enquiry For Teseq ISN T800S Impendace Stabilization Network per CISPR 22/32 Figure D.3/G.3

Teseq ISN T800S Impendace Stabilization Network per CISPR 22/32 Figure D.3/G.3

For use with one, two, three, or four unscreened balanced pairs

Refers schematic circuit example in CISPR 22/32 Figure D.3/G.3

Intended for connection to cable category 3 and 5

1000BaseT and PoE application

Changeable pin-arrangements with RJ11 and RJ45

Name Email Phone Subject Message or
Add to Compare

Showing 1 - 9 of 9 items

Product successfully added to your shopping cart

There are 0 items in your cart. There is 1 item in your cart.

Impedance Stabilization Network (ISN) There are 9 products.

Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Send Enquiry For Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Send Enquiry For Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Teseq ISN T8-Cat6 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Com-Power ISN-T2 Impendace Stabilization Network 150 kHz to 30 MHz

Send Enquiry For Com-Power ISN-T2 Impendace Stabilization Network 150 kHz to 30 MHz

Com-Power ISN-T2 Impendace Stabilization Network 150 kHz to 30 MHz

Com-Power ISN-T8 Impendace Stabilization Network 150 kHz to 30 MHz

Send Enquiry For Com-Power ISN-T8 Impendace Stabilization Network 150 kHz to 30 MHz

Com-Power ISN-T8 Impendace Stabilization Network 150 kHz to 30 MHz

Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Send Enquiry For Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Rent Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Schwarzbeck CAT5 8158 8-Wire Impedance Stabilization Network

Send Enquiry For Schwarzbeck CAT5 8158 8-Wire Impedance Stabilization Network

Schwarzbeck CAT5 8158 8-Wire Impedance Stabilization Network

Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

Send Enquiry For Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5

Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Send Enquiry For Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

Teseq ISN T800S Impendace Stabilization Network per CISPR 22/32 Figure D.3/G.3

Send Enquiry For Teseq ISN T800S Impendace Stabilization Network per CISPR 22/32 Figure D.3/G.3

Teseq ISN T800S Impendace Stabilization Network per CISPR 22/32 Figure D.3/G.3