Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Calibration / Verification Accessories
Calibration / Verification Accessories
Calibration / Verification Accessories
Calibration / Verification Accessories There are 18 products.
CP-CF Calibration Fixture for Current Probes
Typically In Stock- Frequency Range: 9 kHz - 500 MHz
- For use with BCIP400M BCI Probe or similar
- ISO 11452-4
- IEC 61000-4-6
- Suitable for probes with diameter of 3.2 to 4.4 cm (1.25 to 1.73 inches)
EFT-CAL-KIT Burst Generator Calibration Kit for IEC 61000-4-4
- Peak voltage up to 8000V
- Average power 4W
- Voltage ratio 500-1000：1 optional
- High reliability and good repeatability
- Max. bandwidth 400MHz
- As per:
- IEC 61000-4-4
- EN 61000-4-4
- ISO 7637.2
- GB/T 17626.4
$2,950.00In StockTeseq INA 5530 ISO 7637 Automotive Pulse 3a & 3b Verification Kit
Call for Availability- Verification of Pulse 3a and 3b
- 40 dB attenuation 50 Ω
- 46 dB attenuation 1000 Ω
- BNC adapted for generator and oscilloscope
- Includes high-quality BNC cable
- Use with our Automotive Transient Immunity Generators
AH Systems CPF-631 Current Probe Calibration Fixture
Typically In Stock- Frequency Range: 400 MHz - 1.5 GHz
- Rugged Design
- 50 Ohm Impedance
- VSWR 2.0:1
Teseq PCJ 9201B Probe Calibration Jig
Inquire for Availability- Designed for use with Teseq CIP 9136A and Teseq CSP 9160A
- IEC 61000-4-6
- Mil-STD 461D/E/F
- ISO 11452-4
NoiseKen 06-00067A ESD Current Target Calibration Set
In Stock- 300kHz-1GHz
- Load Resistor
- To Measure, Verify and Calibrate ESD Current Waveform
Schloder CAL 1250 50/60 Hz Magnetic Field Calibrator
In Stock- Generation of magnetic fields by 3-channel generator/amplifier combination for calibration purpose
- Complies to IEEE644
- Loop sensor for field verification is included
- Application Software WIN7 compatible
- Connection to computer via USB-port
AH Systems CPF-630 Current Monitoring Probe Calibration Fixture
Typically In Stock- Frequency Range: 20 Hz - 500 MHz
- Rugged Design
- IEC 61000-4-6
- Mil-STD 461D/E/F
3ctest BX602/BX602-AD ESD Calibration Set
In Stock- As per IEC61000-4-2 :2008
- 2Ω impedance ± 5%
- Test voltage up to 30kV
- Insertion loss ± 0.5dB at 1GHz
- Insertion loss ±1.2dB at 4GHz
- Include 20 dB attenuator and coaxial cable 1m (JZ602)
- Option：Target adapter（BX602-AD）
As per standards
- ISO 10605
- IEC 61000-4-2
- GB/T 17626.2
- EN 61000-4-2
AH Systems CPF-532 Calibration Fixture for Injection & Monitoring Current Probes
Typically In Stock- Frequency Range: 10 kHz - 400 MHz
- Rugged Design
- IEC 61000-4-6
- Mil-STD 461D/E/F
Com-Power ISN Calibration Kit for ISN and LCL Adapters
In Stock- Measurements for common mode impedance, phase angle, voltage division factor, decoupling attenuation (isolation) and longitudinal conversion loss (LCL)
A step-by-step procedure, including test setup diagrams is provided with the calibration kit
Rent Teseq CAS 3025 Burst/EFT Pulse Verification Kit
Call for Availability- Monthly Rental - Ships Immediately
- Verification/calibration kit for IEC/EN 61000-4-4, amendment 2
- For peak voltages up to 8.8 kV
- INA 265B: 50 Ω termination, 60 dB attenuation
- INA 266A: 1 kΩ termination, 66 dB attenuation
- Compatible with all burst/EFT generators
