SAE J-1113-2

Rent, buy or lease test equipment for SAE J-1113-2: Conducted Immunity, 30 Hz to 250 kHz, Power Leads. The EMC Shop specializes in electromagnetic compatibility measurement and testing on vehicle components.

SAE J-1113-2: Conducted Immunity, 30 Hz to 250 kHz Test Equipment

SAE J-1113-2 There are 7 products.

Showing 1 - 7 of 7 items
    • Most compact equipment for ripple noise on ac/dc supplies and magnetic fields
    • Built-in LF signal generator
    • Built-in LF amplifier
    • Built-in LF transformer 2:
    • Built-in frequency-selective voltage and current meter
    • Built-in load resistors
    • Automatic self-calibration
    • Frequency Range: 10 Hz - 250 kHz
    Request Quote/More Info
    • One-box transformer and 0.5 ohm load assembly
    • Frequency response 10 Hz to 250 kHz
    • Secondary saturation 50 A per transformer
    • Audio power 2 x 200 W
    • Freely configurable on primary/secondary; serial, parallel, single
    • Turns ratio 2:1 step down
    • Built-in non-inductive load resistor 0.5 ohm, 250 W
    Request Quote/More Info
    • Signal generator and integrated power amplifier 15 Hz to 150 kHz
    • Meets IEC / EN 61000-4-16 in combination with NSG 4060-1
    • Meets IEC / EN 61000-4-19 in combination with CDND M316-2 for voltage and CT 419-5 for current testing
    • Prepared test configurations for IEC / EN 61000-4-16 and IEC / EN 61000-4-19
    • 5.7” color display 
    • Multiple EUT monitoring options
    Request Quote/More Info
    • ISO 16750-2 TEST A/B
    • ISO 7637-2 P5a/P5b
    • Generates clipped load dump pulse 
    • internal adjustable source impedance 
    • Pulse duration up to 1200ms (internal resistance more than 2 Ω)
    • Comply with most international standards and car manufacturer standards 
    • Built-in 60V/30A coupler 
    • With the function of current detection and over current protection 
    • Ethernet, RJ 45, PC control

    Request Quote/More Info
    • Compliance 5 RF Emissions & Immunity Software:
      • Commercial
      • Military
      • Aerospace
      • Automotive
      • Reverberation Chamber
    • Create Test Reports
    • Over 350 Instruments Supported
    • Modify test procedures, test set-ups and EUT test sequences

    Request Quote/More Info
    • For EMC test according to the standard IEC /EN 61000-4-16
    • Output module with 5A / 250 W
    • DC, sine, triangle and square waveforms external
    • Input adds to internal signal source Windows
    • Application software via USB port
    Request Quote/More Info
    • 4-Quadrant – Can source and sink current
    • ±80V – DC supply for 12V to 48V systems; meets 80V surge requirements
    • 300 kHz Sine – DC ripple tests for all major standards
    • 3µS Rise Time – Exceeds surge and dropout slew rate requirements
    • 3mΩ DC Source Impedance – Out-performs ISO 7637-2 requirements
    Request Quote/More Info
Showing 1 - 7 of 7 items