Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Magnetic H-Field Probes
Magnetic H-Field Probes
These isotropic magnetic H-field probes can be used for monitoring field strengths while performing magnetic immunity tests per IEC 61000-4-8, IEC 61000-4-9 or IEC 61000-4-10 or can be used in the field to evaluate exposure.
Rent, buy or lease magnetic field meters and probes for evaluation at very low frequencies. Magnetic H-field probes are also used to calibration magnetic field generators used in compliance testing. See Near Field Probes for componenet and subassembly debugging.
Magnetic H-Field Probes There are 16 products.
Narda HF-3061 H-field Meter 300 kHz - 30 MHz
In Stock- Flat frequency response
- Coil sensors
- Isotropic characteristic
- Multi-point calibration
- Modular, can be used with any NBM basic unit
Hioki Magnetic Field Field HiTester 10 Hz to 400 kHz
In Stock- Complies with ICNIRP 2010 guidelines as well as other relevant standards for evaluation testing.
- Complies with IEC 62110/IEEE 644 as well as IEC 62233.
- Bundled with 3 cm2 Sensor used for magnetic field distribution analysis, and 100 cm2 Sensor used with the IEC/EN 62233 standard analysis
- User-selectable display units (T, A/m, and G)
- Simple operation for easy measurement
- Bundled with PC application software
- Level output for RMS value, or 3-axis waveform output for magnetic fields
Wavecontrol WPH-DC Magnetic Field Probe DC - 40 kHz
Typically In Stock- Medical (MRI: Magnetic Resonance Imaging): IEC 60601-2-33
- Railway (DC Motors): EN 50500
- Automotive (Electrical vehicles)
- Chemical Industry (Electrolysis)
- Strong Permanent Magnets (Heavy duty magnet lifters)
- Energy (DC generators)
- Metrology (Earth static field)
- For use with Wavecontrol SMP2 RF Meter
MFP50M Isotropic Magnetic Field Probe 500 kHz - 50 MHz
Typically In Stock- Covers frequencies of major industrial, boradcast and telecommunication sources
- Eliminates need for 2 probes
- 500 KHz -50 MHz
- Field strength: 0.05 - 20 A/m
Wavecontrol 3-IN-1 SMP2 Field Meter DC-60 GHz for Broadband and DC-400 kHz for Static Field Measurements
Typically In Stock- Broadband Measurements: DC - 60 GHz With RMS and isotropic field probes
- Spectrum Analysis: DC- 400 kHz Real-time FFT
- Weighted Peak Method: (WPM) Real-time comparison in % with the selected limits
- International standards: ICNIRP, IEC, EN, IEEE, etc.
- USB and Fiber Optic Communication Software Included
Wavecontrol WP400-3 Field Probe for IEC-EN 62822 & IEC-EN 62233 1 Hz - 400 kHz
Typically In Stock- 1 Hz - 400 kHz
- Measurement range Electric Field: 10 V/m to 400 kV/m
- Measurement range Magnetic Field: 200 nT - 50 mT
- Peak Value: digital real-time
- Noise Level Electric Field: < 10 V/m
- Noise Level Magnetic Field: <200 nT
- Typical Uncertainty Electric Field: .67 dB
- Typical Uncertainty Magnetic Field: .60 dB
- For use with Wavecontrol SMP2 RF Meter
ETS-Lindgren HI-2200 Electric and Magnetic RF Survey Meter
- Hand Strap & Safety Lanyard Mount
- E100 Isotropic E-field probe, 100 kHz - 5 GHz, 0.3 - 800 V/m
- H210 Isotropic H-Field Probe, 5 - 300 MHz, 30 mA/m - 10 A/m
- Fitted Carry Case
- Small/Lightweight for Minimal Field Perturbance
- Broadband Frequency Range
- One Hand Operation
- ¼ X 20 UNC Tripod Mount
$7,500.00Typically StockedWavecontrol Magnetic Field Probe Rentals
Typically In Stock- For use with Wavecontrol SMP2 RF Meter
- WPH60 300kHz to 60 MHz and WPH1000 30 MHz to 1 GHz
- High sensitivity from 0.018 A/m
- Measurements in accordance with International Standards
- Isotropic & True RMS measurement
Narda 8511 Magnetic Field Meter, 300 kHz - 100 MHz
Typically Stocked- Frequency range 300 kHz to 100 MHz
- Band coverage 0.3 - 1.0 MHz, 1.0 - 20 MHz,20 - 80 MHz, 80 - 100 MHz
- Measurement range: 0.1 bis 100 mW/cm² E field, 0.2 bis 200 mW/cm² H field
- Special feature(s): Zero alignment at a keypress
- Display units mW/cm², W/m², V/m, A/m
Hioki 3470-02 Magnetic Field Meter, 10 Hz - 400 kHz
Typically Stocked- Exposure level measurements for compliance testing - Time domain evaluation as per IEC62233 and EN 50366
- A choice of two tri-axial isotropic magnetic field sensors
- Bundled with PC application offering RMS logging, batch export and tester setup functions.
- Magnetic flux density (Band) 10 Hz to 400 kHz / 10Hz to2 kHz / 2kHz to 400 kHz
- Selectable Magnetic Flux Density Units: Select T (Tesla), G (Gauss) or A/m
- Measurement ranges Magnetic flux density : 2.000µT/ 20.00µT/200.0µT/2.000mT
- Exposure level : 20.00%/200.0%/2000%
- Display Indicated axis (x,y,z,R) / Magnetic flux density / Exposure level (LCD Display)
Narda NIM-511 Electric and Magnetic Field Meter, 300 kHz - 100 MHz
Typically StockedFrequency Range: 300 kHz - 100 MHz
Measurement Range:
- E-field: 0.1 to 100 mW/cm2 (20 to 614 V/m)
- H-field: 0.2 to 200 mW/cm2 (0.073 to 2.3 A/m)
Result Unit: mW/cm2 , W/m2 , V/m, A/m
Directivity: Isotropic (tri-axis)
Narda PMM EHP-50C Electric and Magnetic Field Analyzer, 5 Hz - 100 kHz
In Stock- Electric Field and Magnetic Flux Density Analysis from 5 Hz to 100 kHz
- Isotropic Measurements with a Dynamic Range of 140 dB
- Small Size and Optical Fiber Connection for Accurate, Repeatable Measurements
- Built-in FFT Spectrum Analysis
- Three (Narrowband, Broadband and Marker) Detection Modes
- Internal Memory for Stand Alone Measurements
- Interfaces to PC and Pocket PC
