Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Electric E-Field Probes up to 6 GHz
Electric E-Field Probes up to 6 GHz
Rent, buy or lease Electric E-Field Probes up to 6 GHz. The EMC Shop specializes in monitoring field strength levels during RF immunity testing.
Electric E-Field Probes up to 6 GHz
Electric E-Field Probes up to 6 GHz There are 19 products.
EFP6G Isotropic Electric Field Probe 100 kHz - 6 GHz
Typically In Stock100 kHz - 6 GHz frequency range
0.3-600 V/m
Operates with RFM high performance broadband radiation field meter
Used for 61000-4-3
EFP100M Isotropic Electric Field Probe 100 kHz - 100 MHz
Typically In Stock- Use for EMC and EMI applications
- 100 KHz-100 MHz
- Field strength: 1 – 800 V/m
Wavecontrol 3-IN-1 SMP2 Field Meter DC-60 GHz for Broadband and DC-400 kHz for Static Field Measurements
Typically In Stock- Broadband Measurements: DC - 60 GHz With RMS and isotropic field probes
- Spectrum Analysis: DC- 400 kHz Real-time FFT
- Weighted Peak Method: (WPM) Real-time comparison in % with the selected limits
- International standards: ICNIRP, IEC, EN, IEEE, etc.
- USB and Fiber Optic Communication Software Included
Wavecontrol WP400-3 Field Probe for IEC-EN 62822 & IEC-EN 62233 1 Hz - 400 kHz
Typically In Stock- 1 Hz - 400 kHz
- Measurement range Electric Field: 10 V/m to 400 kV/m
- Measurement range Magnetic Field: 200 nT - 50 mT
- Peak Value: digital real-time
- Noise Level Electric Field: < 10 V/m
- Noise Level Magnetic Field: <200 nT
- Typical Uncertainty Electric Field: .67 dB
- Typical Uncertainty Magnetic Field: .60 dB
- For use with Wavecontrol SMP2 RF Meter
ETS-Lindgren HI-6005 Electric Field Probe
Typically In Stock- 100 kHz - 6 GHz Frequency Response
- Dynamic Range: 0.5 - 800 V/m
- Provides Individual and Summed Axis Values
- A2LA Accredited Calibration Report
- Suitable for MIL Standard Specs:
- MIL-STD 461F Radiated Susceptibility (RS)
- Suitable for Automotive Specs:
- SAE J1113/27
- GM9120P
- GM93100GS
- GM9114P
- Suitable for Commercial Specs:
- EN/IEC61000-4-3 Radiated Immunity
- Operates with most 3rd Party Immunity software
Narda EF 0392 E-Field Probe for NBM-520, 100 kHz - 3 GHz, 1300 V/m
In Stock- Meausurement up to 1300 V/m CW
- Dynamic Range: 64 dB
- Flatness: ±1 dB (1 MHz - 1 GHz), ±1.25 dB (1 - 2.45 GHz)
- Isotropic Response: ±1 dB
Wavecontrol WPF3-HP 100 kHz - 3 GHz E-Field Probe
Typically In Stock- For use with Wavecontrol SMP2 RF Meter
- 100 kHz - 3 GHz
- High Power Model: 0.2 - 1,000 V/m
- Flat Response (Isotropic E-field)
Amplifier Research FL8040 Laser-Powered E-Field Probe Kit, 20 MHz – 40 GHz, CW & Pulse
Rental Available- 2-1000 V/m
- Accurate field measurements ensure EMC lab measurements meet test standard requirements
- Separable-axis field probe capable of measuring both continuous wave & pulse electric fields
- Use of laser to deliver power-over-fiber allows continuous operation without recharging or replacing batteries
Amplifier Research FL8009 Laser-Powered Electric Field Probe Kit, 20 MHz – 9.3 GHz, CW & Pulse
Rental Available- 0.5-800 V/m
- Accurate field measurements ensure EMC lab measurements meet test standard requirements
- Separable-axis field probe capable of measuring both continuous wave & pulse electric fields
- Use of laser to deliver power-over-fiber allows continuous operation without recharging or replacing batteries
Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing
Typically Stocked- 10 kHz - 6 GHz Frequency Range
- Up to 60 dB dynamic, single range
- 0.1 to 1,000 V/m
- Amplitude Accuracy @ 10 V/m: 1.0 - 1.5 dB
- Excellent isotropy (down to 0.4 dB typical)
- Minimum Pulse Width: 500 ns Burst mode and 2 µs Streaming Mode
Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe
Typically Stocked- 5 kHz to 9.25 GHz
- Up to 60 dB dynamic, single range
- 1.5 to 1,500 V/m (3,000 V/m Overload)
- Symmetrical dipole configuration
- Excellent isotropy (down to 0.4 dB typical)
- Up to 80 hours of operation before recharging
- High performance, high reliability Li-Mn battery
- PC direct connection via Optical to RS232/USB adapters
- Weighs less than an ounce
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz
Typically in Stock- 0.5 V/m to 800 V/m
- +/- 2 dB Flatness
- Laser powered
- Small size permits use in TEM cells and is less disruptive to the RF field
- User friendly interfaces with the FM7004 field monitor and/or VM7000 virtual monitor software
- USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial
- Automatic Temperature compensation
