> EMC Test Equipment>RF Test Equipment>Vector Network Analyzers
Vector Network Analyzers

Characterize RF, microwave and millimeter wave signals utilizing two or four channel vector network analyzers. Rent, buy or lease Vector Network Analyzers at The EMC Shop.

Vector Network Analyzers There are 10 products.

Showing 1 - 10 of 10 items
  • Quick view
    • Spectrum Analyzer Frequency: 9kHz - 1.5 GHz
    • Vector Network Analyzer Frequency: 10 MHz - 1.5 GHz
    • Resolution Bandwidth: 1 Hz - 1 MHz
    • Displayed Average Noise Level: -156 dBm/Hz
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view

    • Multiple Source Control and Frequency Offset

    • E/O and O/E Application

    • Rear Panel IF Inputs (for upgrade to Millimeter Wave)

    • NxN calibration Utility for Mixer Measurements

    • Embed/De-Embed application

    • High Stability Frequency Reference

    • 20 GHz Frequency

    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    $15,900.00
    • 10μHz - 1MHz Phase Sensitive Multimeter
    • Frequency Response Analyzer 
    • Vector Voltmeter
    • LCR Meter
    • Power Meter
    • RMS Voltmeter
    • Harmonic Analyzer
    $15,900.00
    Add to cart
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Equipment Type: Benchtop
    • Combination Device: Vector Network analyzer
    • Port Connectors: N Type, N Type - Female
    • Measurement Time: <75 ms
    • Frequency: 9 kHz to 3 GHz
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 5 Hz to 3 GHz frequency
    • S-parameter test port (5 Hz to 3 GHz, 50 Ω)
    • Gain-phase test port ( 5 Hz to 30 MHz, 1 MΩ/50 Ω)
    • Wide dynamic range
    • Built-in DC bias source (up to ±40 Vdc)
    • Compact form factor
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Impedance 50 Ohm
    • Test port connector type N, female
    • Number of test ports 2
    • Frequency range 20 kHz to 4.8 GHz
    • Full frequency accuracy ±5·10⁻⁶
    • Frequency resolution 10 Hz
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Equipment Type: Benchtop
    • Combination Device: Network analyzer
    • Ports: 2 Ports, 4 Ports
    • Port Connectors: N Type, N Type - Female
    • Port Impedance: 50 Ohms
    • Frequency: 9 kHz to 6 GHz
    • Measurement Speed: <50 ms
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Supplied with Calibration Kit
    • Supplied with Calibration Certificate
    • Medium-class network analyzer featuring outstanding performance
    • Overrange up to 150 kHz (unspecified and without calibration ex factory)
    • Capable of balanced measurements (mixed-mode S-parameters)
    • Internal step attenuators available as options (up to two attenuators can be installed; for details click link to respective option)
    • Two internal sources (e.g. to provide the RF and LO signals for mixer measurements from a single unit)
    Request Quote
    Typically In Stock
    Request Quote/More Info
    Add to Compare
  • Quick view
    • Frequency Range 10MHz – 40GHz
    • 2-ports
    • Dynamic range up to 140dB
    • Fastest swept synthesized measurement speed
    • High available power: up to +13 dBm
    • Highest data resolution utilizing 100,000 points for maximum flexibility
    • Best time domain analysis (100,000 points and 700 kHz frequency step size provide the most accurate, highest resolved, Low Pass Mode measurements)
    • Interfaces: LAN,USB,GPIB,RS232C
    Request Quote
    1 Unit Left
    Request Quote/More Info
    Add to Compare
  • Quick view
    • 100 kHz to 500 MHz / 1.5 GHz / 3 GHz / 4.5 GHz / 6.5 GHz / 8.5 GHz / 14 GHz / 18 GHz
    • Dynamic Range: 117 dB (spec), 122 dB (typical)
    • Output Power: 0 dBm
    • Trace Noise: 0.015 dBrms
    • 2-port, 50 ohm, S-parameter test set, Type-N connectors
    • Sweep Type: Linear and log frequency, Segment sweep
    • Noise Floor: -127 dBm
    • upgrade options at any time
    • Industry-standard ENA Series measurement framework
    • Support for 6 languages via softkey; embedded help manual in English/Simplified Chinese
    • USB Interface standard, GPIB and Handler I/O optional
    • Three-year warranty

    What's Included

    • E5063A ENA vector network analyzer
    • E5063A ENA vector network analyzer Installation guide
    • CD ROM IO libraries
    • Power cable
    • Certificate of calibration
    Request Quote
    In Stock
    Request Quote/More Info
    Add to Compare
Showing 1 - 10 of 10 items