Telecom Testing

Telecom Testing EMC requirements for information technology & telecommunication equipment.

The EMC Shop stocks electromagnetic environmental equipment for classes of telecommunication equipment covering all relevant electromagnetic environmental parameters. This Recommendation applies to telecommunication equipment installed in telecommunication centres, outdoor locations and customer premises. This is a basic EMC Recommendation for telecommunications.

Telecom Testing  There are 20 products.

Subcategories

  • ETSI EN 301 489-1

    ETSI EN 301 489-1 defines performance criteria for continuous phenomena applied to transmitters (CT) and receivers (CR), transient phenomena to transimetters (TT) and receivers (TR). The EMC Shop supports pre-compliant and fully compliant intentional radiated testing for ETSI EN 301 489-1, helping customers become competent in testing with the purchase of turn key test systems.

    Get Application Support, Pricing, Lead Time and More: Contact Form

    Test Methods Applied:

     

  • FCC Part 15

    FCC Part 15 regulates low power, unlicensed devices that could cause interference to the Amateur Radio Service and vice versa.

    FCC Part 15 covers an assortment of electronic equipment that generates RF energy whether it's intentional, unintentional or incidental. Amateurs will need to consider Part 15 as it relates to digital devices, computers, low-powered, unlicensed transmitters, electrical devices and any other "generic" device that might generate RF in the normal course of its operation.

  • FCC Part 68

    Part 68 of the FCC rules (47 C.F.R. Part 68) governs the direct connection of Terminal Equipment (TE) to the Public Switched Telephone Network (PSTN), and to wireline carrier-owned facilities used to provide private line services. Part 68 also contains rules concerning Hearing Aid Compatability and Volume Control (HAC/VC) for telephones, dialing frequency for automated dialing machines, source identification for fax transmissions, and technical criteria for inside wiring.

    Rent, buy or lease FCC Part 68 Test Equipment for Telecom Terminal Equipment. The EMC Shop specializes in FCC, telecom and commercial compliance testing.

    Many technical and administrative functions mandated by Part 68 have been privatized. However, the FCC retains the responsibility to enforce Part 68 rules.

  • ITU-T K

    The EMC Shop carries a variety of Telecommunications Test Equipment for ITU-T K compliance.

  • Bellcore/Telcordia GR-1089-Core

    Bellcore/Telcordia GR-1089-Core covers Telecommunications equipment, by nature of its application in the telecommunications network, that may be exposed to one or more sources of electromagnetic energy.

    The EMC Shop is a supplier of in-stock EMC equipment for telecommunications EMC equipment. 

per page
Showing 1 - 12 of 20 items
    • Surge Module Puse 10/700us per IEC/EN 61000-4-5 & ITU ETSI
    • Cost effective CDN's for unshielded symmetric and asymmetric communication lines
    • 5.7" Color Touch Screen
    • Surge Failure Detection
    • Remote Control Functionality via LAN Ethernet
    4-6 Weeks
    Request Quote/More Info
    • Most Economical Surge Solution on the Market
    • Surge Simulation Pulse per IEC/EN 61000-4-5 & UL 1449 (pre-programmed)
    • Built-in Coupling Network for Single Phase DUT
    • 5.7" Color Touch Screen
    • Surge Failure Detection
    • Remote Control Functionality via LAN Ethernet
    $1,475.00
    In Stock
    Request Quote/More Info
    • High conductive magnetic material for decoupling device;
    • Test output to 4-path 8-line communication line; 
    • Transfer rate up to 10MB/100MB/1000MB;
    • Surge waveforms superimposed; 
    • Powerful withstand surge impulse capacity, Max. withstand peak voltage is up to 10kV (standard: 6kV)
    • Replaceable current-limiting resistor

    Standard

    • IEC 61000-4-5
    • GB/T 17626.5
    • EN 61000-4-5
    Typical Lead Time: 4 - 6 Weeks
    Request Quote/More Info
    • Meet UL 1449, ANSI C62.41, IEC 61000-4-5, EN & IEC 60255-5
    • Cost effective CDN's for unshielded symmetric and asymmetric communication lines
    • Built in Single Phase CDN
    • 0.3kV – 6.0kV
    • 5.7" Color Touch Screen
    • Surge Voltage and Current Monitoring
    • Remote Control Functionality via LAN Ethernet
    $16,600.00
    4-6 Weeks
    Request Quote/More Info
    • Compatible with other Surge Generators
    • CDN for 1.2/50 pulse as per IEC 61000-4-5 edition 3
    • CDN for up to 8 wire unshielded symmetrical high speed communication lines
    • Coupling to 1, 2 or 4 pairs
    • Transfer Rates: 10MBit/s
    Typical Lead Time: 4 - 6 Weeks
    Request Quote/More Info
    • Standalone tester for 10/700 µs pulse as per IEC 61000-4-5
    • Complies to ITU-T
    • Complies to FCC part 68 (Surge B pulses)
    • Built-in CDNs for 2-wire and 4-wire applications
    • Manual operation
    • Standard Test routines
    • USB and GPIB interface
    4-6 Weeks
    Request Quote/More Info
    • Rentals Ship Immediately
    • All-in-One Package Includes:
    $1,975.00
    In Stock
    Request Quote/More Info
    • Standalone tester for 10/700 us pulse as per EN/IEC 61000-4-5
    • Test voltage up to 10 kV
    • Complies to ITU-T for enhanced level testing
    • Complies to FCC part 68 (Surge B pulses)
    • Built-in CDNs for 2-wire and 4-wire applications
    • Manual operation
    • Standard Test routines
    • USB (optical link) and GPIB interface
    4-6 Weeks
    Request Quote/More Info
    • Parameter ramp feature / Electronic polarity change
    • Automatic coupling path selection.
    • High degree of automation without software
    • Combined Surge,Ringwave and Telecom generator
    • Accurate and stable phase angle synchronisation
    4-6 Weeks
    Request Quote/More Info
  • Request Quote/More Info
    • 10/700us impulse shape up to 7.4kV
    • Compliant to ITU K.44, IEC 61000-4-5 Data lines and ITU K.20, K.21 & K.45 Telecom Interfaces 
    • Fully automatic coupling network
    • Current limit resistors 25 Ohm, 50 Ohm, 75 Ohm and 100 Ohm
    • Coupling elements user changeable, gas arrestor 90V are standard
    • Selected resistors and coupling elements clearly shown on the PCD 120 front panel
    Typically In Stock
    Request Quote/More Info
    • Automatic 10/700us Telecom Wave Impulse (with external TW 8 module)
    • 5kV EFT/Burst
    • 7kV Combination Wave (1.2/50us & 8/20us)
    • 7kV Ring Wave
    • AC/DC Voltage Dips
    • Pulsed Magnetic Field tests
    Typically In Stock
    Request Quote/More Info
Showing 1 - 12 of 20 items