FCC Part 15

FCC Part 15 regulates low power, unlicensed devices that could cause interference to the Amateur Radio Service and vice versa.

FCC Part 15 covers an assortment of electronic equipment that generates RF energy whether it's intentional, unintentional or incidental. Amateurs will need to consider Part 15 as it relates to digital devices, computers, low-powered, unlicensed transmitters, electrical devices and any other "generic" device that might generate RF in the normal course of its operation.

FCC Part 15 There are 14 products.

per page
Showing 1 - 12 of 14 items
    • 9 kHz a 30 MHz frequency range
    • 32 Amps max output current
    • Large baseplate for optimal grounding
    • Built-in, selectable, 150 kHz high pass filter
    • Artificial Hand circuit
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Typically Stocked
    Request Quote/More Info
    • 9 kHz a 30 MHz frequency range
    • 63 A max output current
    • Large baseplate for optimal grounding
    • Local and remote control for PMM EMI receivers
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
    Typically Stocked
    Request Quote/More Info
    • 9 kHz to 30 MHz frequency range
    • Up to 300 A (continuous); 500 A (20 min.) rated output current
    • Suitable for DC to 60 Hz power lines
    • Built-in, selectable 250 µH coil (Choke)
    • Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15, MIL-STD 461F
    • Fan air cooling
    • Available in single phase unit (see data sheet L1-500)
    Typically Stocked
    Request Quote/More Info
    • Rental Rate Per Month - 3 Month Minimum Required
    • Rentals ship immediately
    • 9 kHz - 3 GHz
    • Automatic EMI measurements
    • High accuray and response
    • Compatible with the BenchLink Web Remote software
    • Log sweep
    • 5 minute warm-up
    • Built-in preamplifier
    $950.00
    Typically In Stock
    Request Quote/More Info
    • 150 kHz to 30 MHz Frequency Range
    • 16 Amps Current Rating
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty
    In Stock
    Request Quote/More Info
    • 150 kHz to 30 MHz Frequency Range
    • 32 Amps Current Rating
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty

    To Rent Com-Power LI-3P-132

    4-6 Weeks
    Request Quote/More Info
    • 150 kHz to 30 MHz Frequency Range
    • 63 Amps Current Rating
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • internal cooling fan
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty
    4-6 Weeks
    Request Quote/More Info
    • 9 kHz - 30 MHz Frequency Range
    • 100 Amps Current Rating
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • internal cooling fan
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty
    4-6 Weeks
    Request Quote/More Info
    • Similar to the LI-3P-200 Series Models, with added 50/250 uH air-core inductor 
    • Frequency Range: 9 kHz to 30 MHz
    • Current Rating: up to 100 Amps
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • 200 Series - Improved Frequency Range
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty
    4-6 Weeks
    Request Quote/More Info
    • For disturbance voltage measurements on single-phase EUTs
    • Frequency Range: 9 kHz to 30 MHz
    • Current Rating: up to 16 Amps
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Simulated impedance (50 μH + 5 Ω)
    • V-network in line with CISPR, EN, VDE, ANSI, FCC Part 15 and MIL-STD-461 D, E and F
    Typically In Stock
    Request Quote/More Info
    • Frequency Range: 9 kHz to 30 MHz
    • Current Rating: 16 Amps
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Remote Switching of Line Under Test
    • Four-conductor Network appropriate for both 3Ø Delta and Wye Power Configurations
    • Three-Year Warranty
    In Stock
    Request Quote/More Info
    • Frequency Range: 9 kHz - 30 MHz
    • Current Rating: 4 x 50 (100) Amps
    • Fully Compliant with CISPR 16-1-2/ANSI C63.4
    • Connections: 4 Wing Terminals
    • Impedance Simulation: 50 µH+5 Ω || 50 Ω
    $5,975.00
    In Stock
    Request Quote/More Info
Showing 1 - 12 of 14 items