Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
FCC Part 30
- International (IEC/EN)
- EN/IEC 61000-3-2
- EN/IEC 61000-3-3
- IEC 61000-3-11
- IEC / EN 610000-3-12
- EN/IEC 61000-4-2
- EN/IEC 61000-4-3
- EN/IEC 61000-4-4
- EN/IEC 61000-4-5
- EN/IEC 61000-4-6
- EN/IEC 61000-4-7
- EN/IEC 61000-4-8
- EN/IEC 61000-4-9
- EN/IEC 61000-4-10
- EN/IEC 61000-4-11
- EN/IEC 61000-4-12
- EN/IEC 61000-4-16
- EN/IEC 61000-4-18
- EN/IEC 61000-4-19
- EN/IEC 61000-4-20
- EN/IEC 61000-4-21
- EN/IEC 61000-4-29
- EN/IEC 61000-4-31
- IEC 61000-4-39
- EN/IEC 62132
- SEMI F47 Voltage Sag Immunity
- Product Standards
- Military & Aerospace Standards
- Automotive EMC Standards
- ISO 7637-2
- ISO 7637-3
- ISO 10605
- ISO 11452
- ISO 16750-2
- IEC 61851-21
- IEC 61851-22
- Ford EMC-CS-2009
- Ford FMC1278
- GMW 3097
- GMW3172
- SAE J1455
- UL 2231-2 Section 24
- UNECE Regulation 10
- SAE J-1113
- LV 123 Test Systems
- CISPR Standards
- Telecom Testing
- ANSI/IEEE Standards
- FCC Part 15
- FCC Part 30
FCC Part 30
The EMC Shop stocks test equipment solutions to support FCC Part 30 millimeter wave radiated emissions testing, compliance and precompliance.
FCC Part 30 There are 10 products.
Showing 1 - 10 of 10 items
QRHA40G 18 GHz to 40 GHz Quad Ridge Horn Antenna
In Stock- Suitable for used between 18 GHz and 40 GHz
- Gain: 13 dBi Typical
- K-Type connectors
- Ideal for 5G Testing or high frequency radiated emissions
Narda EF 5092 50 GHz Electric field Probe for NBM Meter
In Stock- Measurement Range: 18 - 1090 V/m
- Dynmaic Range: 37 dB
- Flatness: ±1.25 dB
- Isotropic Response: ±1 dB
- Ideal for Satellite Communication, Leak Detection and Exposure Levels (Partially suitable for Radar Signals)
Keysight (Agilent) N5183A Microwave Analog Signal Generator, 100 kHz to 40 GHz
- Frequency coverage to 40 GHz
- Fast frequency and amplitude switching speed (< 900 μs, 600 μs typ)
- Fast switching frequency and amplitude switching
- High power (+18 dBm to 3.2 to 20 GHz)
- AM, FM, phase modulation
- Pulse modulation
- Instrument security
- Price includes accredited calibration
Included in the refurb model:- 540 – 100kHz to 40GHz Frequency Range
- 1E1 – Mechanical attenuator
- 1EA - High Power Output
$68,000.00In StockPA40G.1 Compact Benchtop Preamplifier 26-40 GHz
Typically In Stock- High Gain
- Full Waveguide Band Coverage
- Small Design for Space Savings
- High Output Power
PA40G Millimeter-Wave Low Noise Amplifier, 18 - 40 GHz, 40 dB Gain
- Runs on standard 120VAC (up to 240V for international use)
- Suitable for millimeter wave emissions and system performance improvement
- Frequency Range of 18 GHz to 40 GHz
- Low Noise Figure: 3 dB
- High Gain: 40 dB typical
- Output Power: + 10 dBm @ 1 dB compression
- 2.92 mm (F) Connectors
$7,575.00Typically In StockRohde & Schwarz FSV40 10 Hz - 40 GHz Spectrum Analyzer
In Stock- 10 Hz to 40 GHz
- Up to 160 MHz signal analysis bandwidth
- Convenient, intuitive operation with touchscreen based user interface 5 GHz
- 0.4 dB level measurement uncertainty up to 7 GHz
- –110 dBc (1 Hz) phase noise at 10 kHz frequency offset
- +15 dBm third-order intercept (TOI)
- Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz; with R&S®FSV-B24 preamplifier: –162 dBm at 30 GHz
- General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics
PA50G 10 MHz - 50 GHz, RF Preamplifier, 25 dB Gain
- Ultra-Broadband Coverage
- Good Gain Flatness
- Bench Top Power Amplification
- Antenna Range
- Power Boosting
$16,500.00Typically In StockHA40G 18 GHz - 40 GHz Horn Antenna, 20 Watt Handling
Typically In Stock- Input Power Handling of 20 Watts CW
- 18 GHz - 40 GHz
- 12 to 17 dBi Gain
- Return loss of 11.0 dB
- K(f) Type Connector
- Weighs 2.5 ounces
Amplifier Research FL7040/Kit 40 GHz E-Field Probe Kit
Typically In Stock- FI7000 Housed in 2U Instrument Case
- Housed in a 19” wide by 3.5” (2U)
- High instrument case
- With a 1.75 (1U) High Blank Panel
- Suitable for MIL-STD-461 RS103
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing
In Stock- Rentals ship immediately
- Monthly Rate Price
- Current ISO 17025 Calibration Provided
- Meets CISPR 16-1-1: 2010 and MIL-STD-461
- Frequency Range: 20 Hz - 40 GHz
- Configuration Includes:
- B10: External Generator Control via GPIB
- B18: Removable Hard Disk
Showing 1 - 10 of 10 items