RF Amplifiers

Quick Links

Information

Viewed products

Amplifier Research 30S1G3 Broadband RF Amplifier

Refurbished

  • Suitable for EMC test applications and CDMA, W-CDMA, TDMA, GSM etc.
  • 30 Watts Typical P1dB
  • 45 dB Gain minimum
  • 0.8 - 3.0 GHz
  • Type N Female, Rear Panel
  • GPIB and RS-232 Interfaces
  • Mismatch tolerance and modulation capability

More details

In Stock

Request Quote/More Info

PDF Downloads

Test Equipment Description

The A.R. 30S1G3 is a solid state, self-contained, air-cooled, broadband RF amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

The Amplifier Research 30S1G3 Broadband RF Amplifier, when used with a sweep generator, will provide a minimum of 30 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 30S1G3 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure. There is a digital display on the front panel to indicate the operate status and fault conditions if an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared. The 30S1G3 digital panel provides control of all amplifier functions both locally and remotely via IEEE-488 (GPIB) or RS-232 interfaces.

The low level of spurious signals and linearity of the Amplifier Researh 30S1G3 make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test applications where undistorted modulation envelopes are desired.

Amplifier Research 30S1G3 Broadband RF Amplifier

  • Suitable for EMC test applications and CDMA, W-CDMA, TDMA, GSM etc.
  • 30 Watts Typical P1dB
  • 45 dB Gain minimum
  • 0.8 - 3.0 GHz
  • Type N Female, Rear Panel
  • GPIB and RS-232 Interfaces
  • Mismatch tolerance and modulation capability

Associated EMC Test Equipment

29 other products in the same category: