Impedance Stabilization Networks (Power and Dat...

(Showing 12 of 55)

Impedance Stabilization Networks  also known as Artificial Mains Networks are the most common transducer to perform conducted emission testing. For testing electrical power lines a Line Impedance Stabilization Network (LISN) is required. To test data lines an Impedance StabilizatioN Network (ISN) is used.

Show 12 24 36 48

Impedance Stabilization Networks (Power and Dat... Test Equipment, Systems & Solutions

  • LISN-CISPR16-32A Line Impedance Stabilization Network - The EMC Shop

    LISN-CISPR16-32A Line Impedance Stabilization Network

    SKU: 8671

    EUT Current Handling: 32 Amps
    Line Voltage: It can be operated with any supply voltage which does not exceed 540V/260V, 50Hz/60Hz. It is also suitable for DC operation.
    Services Available: ISO 17025 Calibration, Rentals, Leases, Purchases, Repairs, Eval/Characterization
    Test Standards: CISPR 16-1-2, ISO 60601-1-2
    Inductance: 50 uH
    Additional Test Standards: FCC Part 15, MIL-STD-461
    In Stock
    View Product View Product
  • Com-Power LI-150C Line Impedance Stabilization Network

    Com-Power LI-150C Line Impedance Stabilization Network

    SKU: sku-890

    Weight: 25 lbs. / 11.3 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 50 Amps (AC), 35 Amps (DC)
    Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 5 µH (air-core)
    Insertion Loss: 0.5 dB (150 kHz to 30 MHz)
    Isolation: 40 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2 / ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    View Product Cart
  • Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair

    Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair

    SKU: sku-881

    Weight: 25 lbs. / 11.3 kg
    Application/Test Type: Power line conducted emissions tests
    Current Rating: 25 Amps (AC), 17 Amps (DC)
    Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH (air-core)
    Insertion Loss: 0.5 dB (150 kHz to 30 MHz)
    Isolation: 40 dB (150 kHz to 30 MHz)
    Mains & EUT Connections: Superior Electric SUPERCON® shrouded sockets
    RF Connector: 50Ω N-type (female)
    Standards Met: CISPR 16-1-2 / ANSI C63.4
    Voltage Rating: 270 VAC (Line to Ground), 380 VDC
    View Product Cart
  • Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC - The EMC Shop

    Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC

    SKU: 11665

    Weight: 27.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 16 Amperes
    Dimensions: 19.3” x 13.9” x 2.3"
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    $5,795.00
    SHIPS IN 3-5 DAYS
    Ordering Options
  • Com-Power LI-3P-1100 150 kHz - 30 MHz Three-Phase Line Impedance Stabilization Network

    Com-Power LI-3P-1100 150 kHz - 30 MHz Three-Phase Line Impedance Stabilization Network

    SKU: sku-600

    Weight: 71.5 lbs
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 100 Amperes
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    View Product Cart
  • Com-Power LI-3P-163 150kHz - 30MHz Three-Phase Line Impedance Stabilization Network

    Com-Power LI-3P-163 150kHz - 30MHz Three-Phase Line Impedance Stabilization Network

    SKU: sku-599

    Weight: 52.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 63 Amperes
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    View Product Cart
  • Com-Power LI-3P-116 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

    Com-Power LI-3P-116 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

    SKU: sku-597

    Weight: 27.5 lbs.
    Application/Test Type: Power Line Conducted Emissions Tests
    Current Rating: 16 Amperes
    Frequency Range: 150 kHz to 30 MHz
    Inductors: 50 µH
    Insertion loss: less than 0.7 dB
    Isolation: more than 40 dB
    Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
    RF Connector: RF Measurement Port 50Ω - N-Type (female)
    Standards Met: ANSI C63.4, CISPR 16-1-2
    Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
    CISPR 16-1-2: Yes
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: Yes
    $395.00
    Ordering Options
  • Rent Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

    Rent Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

    SKU: sku-302

    Application/Test Type: Power line conducted emissions tests
    Current Rating: 50 Amps
    Frequency Range: 10 kHz to 50 MHz
    Inductors: 50 µH (0.10 µF Coupling Capacitor)
    Mains & EUT Connections: Terminal Screw
    RF Connector: 50Ω N-type (female)
    Standards Met: FCC Part 15, CISPR 16-1, ANSI C63.4 (1992)
    Voltage Rating: 500 VAC (Line to Ground), 800 VDC
    View Product Cart
  • PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

    PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

    SKU: 10264

    Weight: 50 kg (110 pounds)
    Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.
    Current Rating: 63 Amps Max (IEC60309); 60 Amps Max (UL1682, UL1686)
    Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 4P5W connector
    RF Connector: BNC (f)
    Standards Met: IEC 60309; UL1682; UL1686; CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
    Voltage Rating: 400 VAC, 565 VDC (L-PE, N-PE) 690 VAC, 975 VDC (L-L, L-N)
    View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form