CISPR Standards

Quick Links


Viewed products

Narda PMM FR4003 EMI Field Receiver 9-30 MHz View larger

Narda PMM FR4003 EMI Field Receiver 9-30 MHz


  • 9 kHz to 30 MHz frequency range
  • Antenna CISPR 12, CISPR 16, CISPR 25, MIL-STD, DO-160 fully compliant
  • Internal full CISPR 16-1-1 receiver
  • Embedded attenuator, preamplifier and preselectors
  • Fiber optic serial link to 9010F series or directly to PC

More details

Request Quote/More Info


Frequency Range 9 kHz to 30 MHz
Standards Met CISPR 16-1-1, MIL-STD-461F fully compliant on-board receiver. CISPR 12, CISPR 25, MIL-STD-461F, DO-160 fully compliant rod antenna
RF Connector Zin 50 Ω, N fem.
RF Input Voltage 380 V/m CW 137 dBμV/m/MHz SD
General Data
Technical Details
Parameter Value
Dimensions 600 x 1122 x 600 mm
Weight 7.10 kg

Test Equipment Description

Narda PMM FR4003 Description:

The FR4003 measures electric fields up to 30 MHz. Thanks to its innovative approach it replaces traditional rod antennas and adds several benefits. It fully meets all MIL-STD and CISPR specifications for rod antennas and is also a fully-compliant CISPR 16-1-1 receiver with a fiber optic link that allows it to work as a stand-alone device (when connected to a PC) or in tandem with a PMM receiver. Nonetheless, it is possible to switch the analog signal from the internal receiver to the analog output and connect it to any standard receiver by traditional coaxial cable, although this is not recommended due to scattering and other drawbacks typical of rod antennas.

The internal receiver structure features preselectors, attenuators and preamplifiers fully controlled either by the internal firmware or manually by the operator. Hence, a test set-up requires no additional receiver. An internal tracking generator allows a self-calibration procedure to guarantee optimum performance and accurate measurements. This tracking generator is part of an internal capacitance meter that is crucial not only for self-calibration, but also for verifying the grounding effectiveness of the antenna. The FR4003 can even become a field generator. In this case the antenna broadcasts the signal produced by the internal signal generator and can therefore be used to characterize environments or other receiving set-ups. In addition to the standard PEMS software, the FR4003 comes with a controlling software, which can be used when connected to a standard receiver. Thanks to its replaceable Li-ion battery, the FR4003 can work for several hours on its own and therefore with an unperturbed field.

Standards Met:

  • CISPR 12
  • CISPR 16
  • CISPR 25
  • DO-160

Associated EMC Test Equipment

30 other products in the same category: