ANSI/IEEE Standards Categories
ANSI/IEEE Standards Test Equipment, Systems & Solutions
-
IEEE 299 Shielding Effectiveness Measurement System
SKU: TES-IEEE299-CUSTOM
Frequency Range: 9 kHz - 18 GHzAntenna Polarization: Automatic or Manual OptionsConfigurations: Single or Multiple AntennasMeasurement Types: E-Field, H-Fied, Plane Wave, Back and FrontTypically In Stock -
EMC Partner MIG0603 Damped Oscillatory Wave Generator System
Frequency: 100 kHz - 1 MHzVoltage range: 0.2 up to 3 kVSource impedance: 200 ohmsDamping rate: 50% between 3rd and 6th periodsPulse rise time: 75 nsBurst repetition: 100 kHz up to 50 HzBurst repetition: 1 MHz up to 500 HzVoltage increment: 1 V stepsIN STOCK -
RFT-09 Faraday Tent for Radiated Emissions Testing
SKU: sku-2266
Attenuation: 90 dB typicalFrequency Range: (150 kHz) 30 MHz - 18 GHzApplications: Radiated Emissions and Radiated Immunity PrecomplianceStandard Options: Lights and VentEnclosure Size: 9ft x 9ft 6.5ftFrame Size: 10ft x 10ft x 9.5ftDoor Size: 70in x 40inFrame Type: Portable and Heavy DutyFeedthroughs: 120 VAC, N(f), BNC(f), SMA(f), Sleeve -
RESA Realtime EMC Spectrum Analyzer
SKU: sku-2075
Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMCPre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461Max Frequency: 3 GHz or 7.5 GHzMin Frequency: 9 kHzSweep/Test Speed: FastAmplitude Accuracy: <0.7 dBResolution Bandwidth: 1 Hz to 3 MHz$195.00In Stock -
RF/EMI Shielding Effectiveness Testing
SKU: sku-1900
Weight: 26 lbFrequency Range: 95 kHz (Crystal Controlled)Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycleReceiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dBTransmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy -
ETS-Lindgren 3142D Biconilog Antenna, 26 - 6000 MHz
SKU: sku-1841
Standards: IEC 61000-4-3,FMC 1278, GMW3097Antenna Factor (1 Meter): -23 to 8 dBiApplication/Test Type: RF EMC immunity testingConnector: N type femaleDimensions: 52.7 in. (133.9 cm) x 66.2 in (168.1 cm) x 30 in (76.2 cm)Frequency Range: 25 MHz - 6 GHzGain: 8 dBiMaximum Continuous Power: 500 WattsTypically In Stock -
Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4
SKU: sku-878
Weight: 20.5 lbs / 9.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amperes AC, 14 Amperes DCDimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cmFrequency Range: 9 KHz - 30 MHzInductors: 250 & 50 microhenry (air-core)Insertion Loss: 6 dB to 1 dBIsolation: 20 dB to 40 dBMains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2 / ANSI C63.4Voltage Rating: 270 VAC (Line to Ground), 380 VDC$295.00Typically In Stock -
Rent Radiated Emissions Test System Using GTEM
SKU: 0869
Frequency Range: 30 MHz - 40 GHzDUT Size: up to 2' cubed (GTEM 750)EMI Measurements: FCC Part 15, CISPR 11, MIL-STD-461 and moreApplications: Precertification testing, CE Marking, Radiated Emissions Testing$1,775.00IN STOCK -
3ctest RWS 600 Ring Wave Simulator for IEC 61000-4-12
SKU: sku-595
Display Interface: 5.7 inch TFT touch screenPhase synchronization: 0°-360°, 1° step or randomPolarity: Positive. negative, alternatingPulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30ΩPulse voltage (open circuit): 0.25 kV–6.0kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Test duration: 1s-99s4-6 Weeks -
Haefely PIM 110 Ring Wave Immunity System for IEC 61000-4-12
SKU: sku-544
Impedance: 12, 30 & 200 OhmsApplications: Surge Immunity TestingRing Wave: 0.5us - 100kHz (voltage & current)Pulse repetition: 12 per minutePulse Voltage: 0.20 – 7.8kVCompliance Standards: IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Test duration: 5 seconds$995.00In Stock -
Haefely PIM 150 Oscillating Wave Surge Generator
SKU: 10526
Burst frequency: 100 kHz & 1 MHzCoupling: Single & Multiple PathMains & EUT Connections: HV connector & CDNSource Impedance: 200 ohmsStandards Met: IEC 61000-4-18 Power & Data lines; ANSI C37.90.1, IEC 60255-22-1, IEEE 1613In Stock -
Thermo Keytek ECAT Transient Generator System
SKU: sku-321
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864
