CISPR 22 Test Equipment, Systems & Solutions
-
Conducted Emissions Test Setup
SKU: 7077
Applications: Conducted emissions testing on power and data lines, CE MarkingTest Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and moreMeasurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)Power Handling: up to 1,000 Volts and 1,000 AmpsOEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, FrankoniaOEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HPGeneric Standards: IEC 61000-6-3, IEC 61000-6-4$590.00 - $14,950.00In Stock -
Fischer FCC F-CVP-1 Capacitive Voltage Probe per CISPR 32
SKU: 5642
Applications: Common Mode MeasurementsStandards Met: CISPR 32, EN 55032$195.00 - $995.00Typically in Stock -
Schwarzbeck CVP 9222 C Capacitive Voltage Probe
SKU: 7403
Frequency Range: 9 kHz - 100 MHzInsertion Loss: 34 dBMax Peak Voltage: 30 VoltsStandards Met: CISPR 16, CISPR 22, CISPR 32, ANSI C63.4Clamp Diameter: 32 mmApplications: CISPR 22 / EN 55022 C 1.3Typically In S -
ISN30M Impedance Stabilization Network for CAT-6 Cable
SKU: 8455
Test Standards: CISPR 24, CISPR 32, CISPR 16-1-2 Annex ECable Type: Cat 6 (Cat 3 and Cat 5 with add-on module)Data Speed: 10GBASE-TCompliant to: CISPR 22, Appendix D, Fig. D.3$219.00 - $3,650.00In Stock -
RFT-09 Faraday Tent for Radiated Emissions Testing
SKU: sku-2266
Attenuation: 90 dB typicalFrequency Range: (150 kHz) 30 MHz - 18 GHzApplications: Radiated Emissions and Radiated Immunity PrecomplianceStandard Options: Lights and VentEnclosure Size: 9ft x 9ft 6.5ftFrame Size: 10ft x 10ft x 9.5ftDoor Size: 70in x 40inFrame Type: Portable and Heavy DutyFeedthroughs: 120 VAC, N(f), BNC(f), SMA(f), Sleeve -
RFT-07 EMI Tent for Radiated Emissions Testing
SKU: 8459
Attenuation: 90 dB typicalFrequency Range: (150 kHz) 30 MHz - 18 GHzStandard Options: Lights and VentEnclosure Size: 7ft x 7ft 6.5ftFrame Size: 8ft x 8ft x 8ftDoor Size: 5ft x 5ftFrame Type: Portable and Heavy DutyFeedthroughs: 120 VAC, N(f), BNC(f), SMA(f), SleeveApplications: EMC Precompliance Testing, Radiated EmissionsIN STOCK -
-
Schwarzbeck CVP 9222 B High Impedance Capacitive Voltage Probe
SKU: 8510
Test Standards: CISPR 16 Radio Disturbance MeasurementFrequency Range: 9 kHz - 100 MHzInsertion Loss (nominal, 50 Ω system): 34 dB (8 mm)Flatness: typ. < ± 0.5 dBMax. Peak Voltage: 30 VOutput Standing Wave Ratio: VSWT < 1.2Applications: Conducted EmissionsTypically In Stock -
Teseq CVP 2200A Capacitive Voltage Probe
SKU: sku-139
Frequency Range: 150 kHz to 30 MHzRF Connector: BNC 50 Ω, female -
RFT-24A EMI Tent for Radiated Emissions Testing
SKU: 8895
Attenuation: 90 dB typicalFrequency Range: (150 kHz) 30 MHz - 18 GHzStandard Options: Lights and VentEnclosure Size: 24' x 11' x 8'Frame Size: 25' x 12' x 8.5Door Size: 66" W x 70" H single/double magnet doorFrame Type: Portable and Heavy DutyFeedthroughs: 120 VAC, N(f), BNC(f), SMA(f), SleeveApplications: EMC Precompliance Testing, Radiated EmissionsIN STOCK -
Teseq ISN ST08C Impedance Stabilization Network for Shielded Balanced Pairs
SKU: sku-170
Frequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
AH Systems SAS-521-4 Bilog Antenna, 25 MHz - 4 GHz
SKU: 11920
Antenna Factor (1 Meter): 7 to 30 dB/mAntennas: Bilogical AntennasApplication/Test Type: RF EMC immunity testing, Radiated Emissions Testing, Improved high frequency gainConnector: N type femaleDimensions: 22.2 in. (56.4 cm) x 38.5 in (97.8 cm) x 39 in (99.1 cm)Frequency Range: 25 MHz - 2000 MHzGain: -28 to 7 dBiImpedance-2: 50 OhmsMaximum Continuous Power: 1000 WattsStandards Met: CISPR 11, CISPR 16-1-4, IEC 61000-4-3Inquire for Availability