Rent the ENI 2100L RF Amplifier 10...
100 Watts RF Power For:
Warning: Last items in stock!
|Frequency range||10 kHz - 12 MHz|
|Gain||50 dB nominal|
|RF Input Voltage||1 mW|
|Output||100 Watts P1dB|
|VSWR||IN: 1.5:1 maximum; OUT: 1.25:1 maximum|
|Flatness||± 1.5 dB|
|Output Impedance||50 Ω / 2:1 maximum|
|Protection||Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max.|
|Dimensions||5.3” x 16.5” x 18.4” 134.5 mm x 420 mm x 467 mm|
|Weight||35 lbs (16 Kg)|
|AC Input||100 – 240 VAC 47 – 63 Hz|
|Rated Power||100 Watts P1dB Compression|
|Saturated Power Output||150 Watts|
|Gain Flatness||+/- 1.5 dB|
|Input Power for Rated Pout||0 dBm (1 mW)|
|Harmonic Level||-25 dBc @ 100W Pout|
|Temperature Range||0° – 40° C|
|Third Order Intercept Point||IP3 ~ 59 dBm|
|Stability||Unconditional into any passive or reactive load|
|RF Input Signal||AM, FM, SSB, Pulsed|
|Front Panel Meter||Front panel indicates up to 200 Watts into 50 Ω|
The E&I (formerly ENI) 2100L Amplifier is a rugged source of RF power, useful for ultrasonics, laser modulation, RFI/EMI, plasma equipment and general laboratory applications. The 2200L represents E&I's commitment to providing RF power amplifiers of the highest quality, durability and ruggedness.
The E&I 2100L produces 100 Watts of class A linear power output over the entire frequency range from 10 kHz to 12 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 53 dB with a typical gain flatness of ±1.5 dB
The 2100L is compatible with most signal generators, frequency synthesizers, sweep generators and other laboratory signal sources. It accurately reproduces all waveforms within its power and frequency ranges: AM. FM, SSB, pulsed and other complex modulation schemes.
The 2100L is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition. The internal switched mode power supply is very conservatively rated, in order to facilitate operation over a large range of line conditions and temperatures. The forced air cooling provides for low internal temperatures, providing long term reliability. The RF power is delivered by rugged DMoS FETs, de-rated to provide for excellent MTBF figures.
|2100L Extended Power Data||Harmonics|
No customer comments for the moment.