Com-Power PAM-118A High Gain EMC Broadband Preamplifier, 500 MHz - 18 GHz, 40 dB Gain

Write a Review
SKU:
sku-217
$0.00
$0.00

Description

The Com-Power PAM-118A is a wideband, high gain, bench top microwave preamplifier. The PAM-118A has a frequency range of 500 MHz to 18 GHz. This preamplifier is primarily intended for EMC applications; However, it may be used for other application that require low noise and high signal amplification.

The simple front panel consists of two 50 Ohm matched precision N-connectors for input and output. The preamplifier was designed to have flat gain with minimal variation over the entire frequency range. The flat gain helps in taking fast adhoc readings during troubleshotting, R&D phase. The high gain and low noise figure of Com-Power PAM-118A increases system sensitivity of effectively all measurement systems. It is very effective in measuring low level signals during Electromagnetic Interference (EMI) testing. It has low VSWR and high reverse isolation.

Each preamplifier is individually calibrated using equipment traceable to National Institute of Standards and Technology. Individual data and certificate of calibration is shipped with each unit. The Com-Power PAM-118A is battery powered to avoid any noise effects of power cables. It can also be powered by 15 VDC, 500 mA power adapter (provided with the unit).

Com-Power PAM-118A Features:

  • Frequency Range of 500 MHz - 18 GHz
  • Low Noise Figure: Less than 3 dB
  • High Gain: 40 dB typical
  • Low VSWR: 2.2:1 Typical
  • Output Power: +12 dBm @ 1 dB compression
  • Flatness: +/- 2.5 dB

Extra Information

Weight:
2.5 lbs (1.1 3Kg)
Application/Test Type:
Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.
Connector:
50Ω Precision N-type (female)
Dimensions:
7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)
Frequency Range:
500 MHz - 18 GHz
Gain:
40 dB typical (± 2.5 dB flatness)
Input:
15 VDC, 500 mA
Maximum Continuous Power:
+102dBm @ 1 dB compression
RF Input Voltage:
0 Vdc (max)
VSWR:
2.2:1 maximum