Wavecontrol SMP2 Description
**Please Note - These are not for sale or rent to private individuals**
The Wavecontrol SMP02 provides a full range of E-Field, H-Field and E&H Field probes covering different frequency ranges starting at 0 Hz and up to 60 GHz.Probes are plug and play and come with an individual ISO 17025 accredited calibration. All sensors are isotropic, RMS and highly accurate.
Wavecontrol SMP2 Specifications
Wavecontrol SMP2 Included Accessories:
- SMP2 Reader PC Software
- SMP2 Carrying Case
- USB Cable
- AC/DC Charger
- Manual
- Calibration Certificate
Wavecontrol SMP2 Optional Accessories:
- SMP2 Reader PC Software
- SMP2 Carrying Case
- USB Cable
- AC/DC Charger
- Manual
- Calibration Certificate
Wavecontrol SMP2 E-Field Probes:
- WPT
- WPF3-HP 100kHz-3GHz, 0.2-1000 V/m RF electric field probe
- WPF6
- WPF8
- WPF18
- WPF40
- WPF60 Electric Field Probe, 1 MHz - 60 GHz
Wavecontrol SMP2 H- and E-Field Probes:
- WP400
- WP400-3
- WP400c
- WP50
Wavecontrol SMP2 H-Field Probes:
- WPH-DC
- WPH60 Magnetic Field Probe
- WPH1000
Wavecontrol SMP2 Applications:
- Measuring field strength in TEM cells and absorber chambers to demonstrate electromagnetic compatibility (EMC)
- Measuring and monitoring field strengths around broadcasting and radar equipment
- Measuring field strengths of cell phone transmitters and satellite communications systems to demonstrate compliance with human safety standard limit values
- Measuring field strengths in the industrial environment, such as plastics welding equipment, RF heating, tempering, and drying equipment
- Measurements for protecting users of diathermy equipment and other medical devices that generate high-frequency radiation
- Measuring field strengths as part of general safety regulations
- 3-in-1 Field Meter: spectrum analysis (DC – 400 kHz), broadband (DC - 60 GHz) and static field measurements.
- Real-time FFT-based spectrum analysis using digital processing.
- Weighted Peak Method (WPM) for automatic and real time comparison with limits.
- Special auto-gain function for peak detection (indispensable for procedures such as welding).
- Display of results in RMS and peak values.
- Function for time domain measurement of a specific frequency.
- Automatic field probe recognition.
- E&H field selection.
- Total field value and value for each component (X, Y, Z).
- Frequency SPAN selection.
- High Pass Filters at 1 Hz, 10 Hz, 25 Hz and 100 Hz.
- Max-hold function.
- Display of maximum, minimum and average values.
Wavecontrol SMP2 Features:
- Sliding window function according to standards.
- Spatial average function.
- Adjustable measurement time from 1s to 100 hours.
- Programmable measurement to start at a given time.
- Graphic display of broadband measurement changes over time.
- Adjustable graph display from 1 s to 12 minutes.
- Programmable alarm function.
- USB and fibre optics connection.
- Large storage capacity.
- Screen-shot function for reporting.
- PC software for control and reporting.
- Results can be uploaded automatically to a web-page control centre.
- Available in several languages.
Wavecontrol SMP2 Downloads
DatasheetVideos
Custom Field
Weight 10.6 oz.
Application/Test Type Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
Battery NiMH rechargeable batteries
4 x AA size (Mignon), 2500 mAh
Dimensions 1.5 x 2.0 x 8 inches
Frequency Range 100 kHz - 60 GHz
Operation Time 20 hours (backlight off, no GPS)
12 hours (permanent backlight, no GPS)
10 hours (GPS receiver connected, no
backlight)
Recharging Time 2 hours
Standards Met IEC/EN 61000-4-3