Description
EM Test Dito ESD Simulator Description
The EM Test Dito is designed for the different requirements for testing ESD. Its powerful battery allows to generate more than 50,000 pulses at 16.5kV.
Its different menues lead the user through standard tests, helps to evaluate the test points and allows to find susceptibility levels.
Discharge tips and discharge networks can easily be changed without disassembling the dito; simply remove one and plug-on another tip or module. The discharge modules are automatically recognised and the R/C configuration is shown in the display.
Compliance Standards Met:
- EN 61000-4-2
- IEC 61000-4-2
- ISO 10605
- ITU-T K.20
- ITU-T K.21
- ITU-T K.45
- MIL-STD 461 G CS 118
- And much more!
Videos
Custom Field
Weight 870 gramms incl. battery
Additional Accessories DM1
150pF/330ohm discharge module
PowerPack dito
Rechargeable battery
LiFePo4 12.8V - 1000mAh
Battery charger
Transportation case, grounding lead
2m, test certificate and operation
manual
Air Discharge Voltage Range 500V - 16,500V +/-5%
Contact Discharge Voltage Range 500V - 10,000V +/-5%
Electrostatic Discharge Pulse conforms to IEC 61000-4-2 edition 2
General Data Technical Details
Holding Time More than 5 seconds
Operating Temperature 5°C - 40°C
Output level see data sheet
Outputs CD mode EN/IEC 61000-4-2; 150pF/330ohm
Resolution 100V steps
Rise Time 0.8ns +/- 25%
Standards Met IEC/EN 61000-4-2, ISO 10605
Supply Voltage More than 70,000 pulses @ 16.5kV;
automatic power-off after 10 minutes
if not operated
LiFePo4 12.8V - 1000mAh
Trigger Automatic + Manual