Description
- EN/IEC 61000-4-2 Ed2 Compliant.
- ISO 10605 Ed2 Compliant (Note: Optional gun head and CR units are required.)
SMART ESD simulator which supports all phases of the test. (Pre to Post)
- Pre-test
"3 pre-checking functions” taking the confirmable test into the account
"CR constant indicator” to ensure correct attachment is in place
- During test
“Ten-key & Rotary knob” to ease the setting
“Infra-red Remote Controller” to allow remote Generator setting
“Discharge Detecting Function” to realize the air-discharge confirmation
“Lightest Discharge Gun in the market” for better continuous operation
“White LED light” to show Discharging points
- After test
“Control Software” for Test Result Reporting and PC Control
(Scheduled to be downloaded from NoiseKen web-site)
Noiseken ESD Simulator System Includes:
- Discharge Gun Model : GT-30RA
- Gun holder
- AUX connector:
- D-SUB 15 pin, female connector
- Connection of Warning Lamp (optional)
- Connection of Automatic ESD Eliminator (optional)
- External interlock input
- External trigger input
- Optical communication connector (for PC communication)
- Remote controller 13-00004A
- Instruction manual
- CR unit (150pf-330 ohm) 06-00073B
- Conical discharge tip 12-00007A
- Round discharge tip 12-00008AInstruction manual
Videos
Custom Field
Weight Approx. 7.0kg (gun holder excluded)
Approx. 7.5kg (gun holder included)
Air Discharge Voltage Range 0.20kV to 30.0kV±5% (30.5kVmax)
10.0kV : 0.01kV step 30.0kV : 0.1kV step
Standards Met IEC/EN 61000-4-2,ISO 10605
Battery AC100V to AC240V 50Hz/60Hz ±10% 75VA
Contact Discharge Voltage Range 0.20kV to 30.0kV±5% (30.5kVmax)
10.0kV : 0.01kV step 30.0kV : 0.1kV step
Polarity positive/negative
Pre-Programmed IEC Levels Yes
Resolution 10 Volt steps up to 10 kV; 100 Volt steps to 30 kV