Description
The RFCI-MIL RF Conducted Susceptibility Test System generates interferences as defined in MIL-STD-461 CS114 - Susceptibility to conducted disturbances, induced by radio-frequency fields. The standard described a test setup, in which can influence these high-frequency interferences without a complicated structure with antennas, field instrumentation and shielded rooms on an EUT. Via coupling networks and coupling clamp’s, sine waves are induced directly into power and signal lines. The EUT keeps its usual place in the installation; the complete unit can be tested in its function.
RFCI-MIL RF Conducted Susceptibility Test System Features
- 10 kHz - 250 MHz Frequency Range
- 75 Watt Integrated Amplifier
- Computer-based system (controlled by USB)
- Self-calibration of the test system (generator and CDN)
- RF-generator, amplifier and RF-voltmeter may as well be used as stand-alone devices
- Connections: EUT “Fail”, EUT monitoring by external multimeter, e.g. DUT signal
- Calibration of BCI Probe is performed automatically
- Extensive additions like attenuators, calibration kits, etc. deliverable
Videos
-
Bulk Current Injection Testing, RFCI System Calibration to 10V per IEC/EN 61000-4-6 - The EMC Shop
System configuration and software run through. #iec61000 #bul...
-
The EMC Shop - Rental of Compliance Test Equipment for RF and Conducted Immunity
Visit https://www.theemcshop.com for more videos, manuals, inf...
Custom Field
connectors BNC
Frequency range 100 kHz - 250 MHz
Weight 11 kg / 24 lbs
Connectors BNC socket, 50 Ω
Dimensions 450 x 150 x 480 mm ( 17.7 x 6 x 19 in)
Frequency Range 10 kHz to 250 MHz
Operating Temperature 0°C to 40°C
Output Impedance 50 Ohm nom
Resolution 0.1 Hz
RF Connector BNC, 50 Ohm
Signal level 46 dB ±1.5 dB
Standards Met MIL-STD 461 CS114, IEC / EN 61000-4-6
Supply Voltage 100 to 240 VAC
50/60 Hz
autoranging