Description
Rohde & Schwarz HM6050-2 Description
The Line Impedance Stabilization Network HM6050-2 is designed for compliance level measurements of conducted EMC emissions. The unit complies with VDE 0876 and CISPR regulations and can be operated manually or PC controlled via the built in RS232 interface. It is designed and built using air core inductors to avoid saturation at peak current loads.
Single-phase V-network to measure line-conducted interferences from 9 kHz to 30 MHz (based on CISPR 16)
- US safety plug, 120 V
- Selectable transient limiter
- Artificial hand connector
Frequency Range: | 9 kHz to 30 MHz |
Impedance Characteristics: | Z = 50 Ω II (50 μH + 5 Ω), Error <20% under terms of VDE 876T1 |
Max. Current: | 16 A |
Line Voltage/Frequency | US Version: 115 V, 50 to 60 Hz |
Artificial Hand: | 220 pF + 511 Ω |
PE (selectable): | 50 μH II 50 Ω |
Line cord, Operating manual included
See Transient Limiters, Attenuators and Transient Generators
Videos
Custom Field
Weight 6 kg
Application/Test Type Power Line Conducted Emissions Tests
Current Rating 16 Amperes
Dimensions 285 x 125 x 380mm
Frequency Range 10 kHz to 30 MHz
Inductors 50 µH
Insertion loss 10dB
Mains & EUT Connections Schuko plug socket
RF Connector RF Measurement Port 50Ω - N-Type (female)
Standards Met CISPR 16-1-2
Voltage Rating 230 Volts